Clérachic white marble disc pendant light on a black cord, photographed full length on a plain white background.

White Pendant Light for Dining Table, Flat Disc Silhouette

25 x 8 cm / Gold & Black & White marble / Warm Light
€216,00
Sale price  €216,00 Regular price 
Skip to product information
Clérachic white marble disc pendant light on a black cord, photographed full length on a plain white background.

White Pendant Light for Dining Table, Flat Disc Silhouette

€216,00
Sale price  €216,00 Regular price 

Incl VAT, Free Shipping & Easy Returns

Size25 x 8 cm
ColourGold & Black & White marble
ARRIVES IN France WITHIN OCT 23–28
Description

A shallow disc of white marble, 25 cm (9.8″) across and 8 cm (3.1″) deep, hangs on a cable. The body is black and gold, made of aluminium and iron, and the light comes from an integrated LED.

Choose warm light at 3000 K or cool light at 6000 K. The pendant is hardwired and suits a dining table. It runs on AC 110–240 V.

Product Specifications
Dimensions ∅24.9 cm × H 7.9 cm (9.8″ × H 3.1″)
Material aluminium, iron, marble.
Light source integrated LED.
Colour temperature 3000 K, 6000 K
Voltage AC 110–240 V
Body finishes Black & Gold.
Shade finish White marble.
Moisture resistance IP 20 Damp-rated for use in bathrooms, kitchens, and covered outdoor areas.
Environment Indoor
Wiring Hardwired.
Control Compatible with common push switches (not included).
Dimension drawing of the flying saucer marble pendant lamp, in outline against white.
Installation Guide

This fitting hangs from a ceiling outlet box and is wired into your mains supply. Work out your hanging height before you connect anything - it is far easier to set the drop with the wiring still loose than to redo it afterwards.

Before you start

  • Mounting: the fitting secures to a standard ceiling outlet box. The bracket and fixings are in the box.
  • Weight: check that your outlet box and ceiling can carry the fitting. Weights are listed in the Product Specifications above. A heavy chandelier may need a brace fitted between the joists.
  • Hanging height: the supplied cord, chain or rod can be shortened. Over a dining table, a drop that leaves roughly 75 to 90 cm between the table top and the bottom of the shade suits most rooms.
  • Ceiling type: every model suits a flat ceiling. Sloped-ceiling compatibility is stated per product in the Product Specifications above.
  • Power: these fittings are hardwired. They do not plug into a socket.
  • Dimming: models with a replaceable bulb can usually be dimmed with a compatible dimmer. Integrated LED models generally cannot.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire strippers
  • Wire nuts or terminal connectors (supplied)
  • Step ladder, and a second person for anything heavy or wide
  • Drill, if you are fitting a new outlet box or bracing the ceiling

Installation

1. Switch off the power

Turn the lighting circuit off at the consumer unit or breaker panel - the wall switch is not enough. Test at the ceiling outlet with a voltage tester and confirm the wires are dead.

2. Fit the mounting bracket

Screw the supplied bracket to the ceiling outlet box with the screws provided. Tighten evenly and check that it sits flat and square; a bracket that is not level will show in the finished hang.

3. Set the hanging height

Adjust the cord, chain or rod to the drop you want before you make any electrical connection. Lock the length using the canopy adjuster or the grip inside the canopy. Where a cord is shortened, coil the surplus neatly inside the canopy rather than cutting it - that keeps the height adjustable later.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Secure each connection with a connector and press the wiring gently up into the box. Nothing should be trapped between the canopy and the ceiling when you close it.

5. Fix the fitting to the bracket

Lift the canopy or backplate onto the bracket and fasten it with the screws or decorative caps supplied. Work up to a firm fit rather than forcing it - decorative caps and plated threads strip easily.

6. Fit the bulbs

Fit the bulb type and wattage listed in the Product Specifications above. Where several sockets share one shade, use identical bulbs so the colour and brightness match across the fitting.

7. Restore power and test

Switch the circuit back on and test the light, including the dimmer if you have fitted one. Isolate the power again before re-opening anything.

Important tips

  • Follow the wiring rules that apply where you live, and use a qualified electrician for high ceilings, sloped mounts or anything you are unsure of.
  • Have someone hold a wide or heavy fitting while you make the connections. Do not let it hang on its wiring at any point.
  • Clean glass and crystal with a dry, soft cloth. Do not spray cleaner onto a fitting that is wired in.
  • Do not over-tighten decorative parts: they are finished, not structural.

If anything about the fitting, the drop or the wiring is unclear, email info@clerachic.com and a person will answer you.

Why You'll Love It
  • No two discs alike — natural marble, so the pattern on yours won't match the photograph
  • No bulb to buy — the LED is built into the fitting, nothing to source or fit
  • You set the drop — the suspension cable gives up to 150 cm (59″) of hanging height
  • Runs off your switch — it hardwires in and works with a common push switch (not included)
How much is shipping?

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 27 October and 3 November.

What if it's not right?

You have 30 days to send it back. If it isn't right, its easy to return.

Need a hand?

We're one email away at info@clerachic.com — real people, before and after you buy.

Payment options
Payment methods
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Easy on the eyes

A soft, warm glow that keeps a room calm — never harsh or clinical.

Made to last

Quality-vetted materials and a considered design, made to last for years.

Free shipping, always

Free shipping to France on every order, with no minimum.

30 days to decide

Live with it first. If it's not right, return it back within 30 days — no fuss.

Customer Reviews

Overall rating: 4.7 / 5 from 3 reviews.

Better than expected quality, comes with everything you need and spares. Had a small issue but the seller quickly resolved the issue. Great product, great seller.

Flying Saucer Marble Pendant Lamp

The labs were very easy to install, but only if you know some basic electricity My wife loved them very well-made

Flying Saucer Marble Pendant Lamp

I love the simplicity, color and style of these. They look as good as the pics and include everything to make a nice statement in any space. Thumbs up!

Flying Saucer Marble Pendant Lamp

You might also like...

Crafted to inspire. Built to last.

Every piece is chosen by hand for craft, function, and the small details most brands skip. If we wouldn't keep it ourselves, we don't sell it to you — and every order is backed by free shipping and 30 days to change your mind.

Questions before you buy? We're real people, one email away at info@clerachic.com.