Double-Headed Wall Light for Hallway, Colorful Painted Metal Shades

Two arms, two shades, one fixture — this wall light doubles the light output of a single sconce while keeping the footprint small enough for a hallway, a bedside wall, or either side of a mirror. Each shade is metal, hand-finished in a run of colors rather than a single flat tone, so the surface catches the light differently depending on the angle you view it from and the time of day. The warm white LEDs it ships with throw a soft, welcoming glow rather than a stark white one, and the metal build gives the whole piece real presence on the wall instead of the flimsiness you get from a moulded plastic sconce. Even switched off, the painted shades read as a small piece of wall art, so the fixture is doing double duty as decor and as light, holding its own visually on a wall even before the bulbs are switched on for the evening.

Features

• Two heads, one fixture — twin arms and shades cast a fuller, more even wash of light than a single-head sconce, without needing two separate fittings or two separate wiring runs.
• Hand-finished colorful shades — each metal shade is painted in a mix of colors that also works as an anti-oxidation coating, so the finish is built to hold its character over time, not just look good on day one.
• Warm white LED bulbs included — two E26 LED bulbs come in the box, already matched to the fixture, so there's nothing extra to source before you install it.
• Solid metal build — the arms and backplate are metal throughout, giving the fixture the kind of weight and durability a plastic sconce can't match.

The finish, up close

Rather than a single sprayed-on color, each shade carries a considered mix of tones layered by hand, which is what gives the surface its depth — it doesn't read as flat or uniform the way a mass-produced painted finish often does. That layering also does practical work: it's the anti-oxidation coating that keeps the metal looking fresh rather than dulling with age, so the character and shine you see on day one are genuinely built to last for years, not just months.Where it fits

The balanced, symmetrical light from the two heads makes it a natural fit either side of a bed for reading, flanking a bathroom or hallway mirror, or spaced along a dining room or living room wall as a softer alternative to overhead lighting. Because the finish leans decorative as much as functional, it also works as a piece of wall art in its own right when the light isn't switched on. Pair two fixtures symmetrically either side of a headboard, sofa, or console table for a considered, gallery-like look, or use a single one as an accent in a hallway or reading nook. In a dining room, mount it at eye height along a feature wall to add ambient light without competing with a pendant over the table; in a living room, use it to soften the corners of a space that's otherwise lit only from a single overhead fixture.Good to know before you buy

Before you order, check the backplate dimensions against your wall's junction box — if the backplate doesn't fully cover the box, you'll need a separate cover plate to get a clean, finished fit. This is a fixed-position fixture with no adjustable cord or chain, so plan the mounting height at the point of installation rather than expecting to reposition it afterward. It's rated IP20 for indoor use, so it belongs in living spaces, bedrooms, and hallways rather than bathrooms or anywhere it might get splashed.

Two heads, evenly spaced

Because both arms extend from a single backplate, the two shades are always the same distance apart and at the same height once it's mounted, so you get a balanced, symmetrical look without having to measure and align two separate fixtures on the wall. That makes it a simpler install than two single sconces if a paired look is what you're after, and a more consistent one too, since there's only one fixing point to get level. It also means the light spread stays even and predictable — both shades sit at the same distance from the wall and cast the same warm glow, so there's no guessing which side will look brighter once the bulbs are switched on for the evening.

Installation

This is a hardwired fixture, so have an electrician make the connection, or fit it yourself if you're comfortable with basic wiring — it's a straightforward job.

Specifications

Frequently asked questions

Do the bulbs come with it?
Yes — two warm white E26 LED bulbs are included, so you don't need to buy anything extra before installing it.

What size is it?
Exact dimensions are shown in the product images. Check the backplate size against your junction box before ordering, since a mismatch may call for an additional cover plate.

Is it dimmable?
No, this fixture is not dimmable — it runs at a fixed warm white brightness once wired in.

Can I use it outdoors?
No — it's rated IP20 for indoor use only, so keep it away from bathrooms with direct water exposure, covered porches, or anywhere it could get wet.

Will the colors on the shades fade over time?
The painted finish is applied with an anti-oxidation coating built in, which is specifically there to help the color and shine hold up over ordinary indoor use rather than dulling quickly.

Does it come with a cord, or does it need wiring into the wall?
It's hardwired rather than plug-in, with no cord and no adjustable arm, so the mounting position you choose during installation is where it stays.

Free shipping on every order. Easy returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.