Clérachic chandelier of rippled glass discs lit warmly on a pale studio backdrop, hung from a brass rod and canopy.

Lustre à disques de verre superposés, verre façonné à la main, structure en cuivre

45 x 40 cm / Cuivre et translucide
€273,00
Prix soldé  €273,00 Prix régulier 
Passer aux informations sur le produit
Clérachic chandelier of rippled glass discs lit warmly on a pale studio backdrop, hung from a brass rod and canopy.

Lustre à disques de verre superposés, verre façonné à la main, structure en cuivre

€273,00
Prix soldé  €273,00 Prix régulier 

TVA incluse, livraison gratuite et retours faciles

CouleurCuivre et translucide
ARRIVE EN France SOUS NOV. 7–12
Description

Hand-formed translucent glass discs step down in tiers from a polished copper-tone metal frame, each disc with its own textured surface. Light passes through the glass as a soft, warm wash, and the tiers give the fixture depth from below.

It comes in four sizes, from 45 cm (17.7″) to 100 cm (39.4″) in diameter, holding four to ten E14 or E12 candelabra bulbs. It is hardwired to the ceiling on a two-piece rod, over a dining area or in an entrance hall.

Spécifications du produit
Dimensions, 45 x 40 cm ∅45 cm × H 40 cm (17.7″ × H 15.7″)
Dimensions, 60 x 45 cm ∅60 cm × H 45 cm (23.6″ × H 17.7″)
Dimensions, 80 x 60 cm ∅80 cm × H 60 cm (31.5″ × H 23.6″)
Dimensions, 100 x 65 cm ∅100 cm × H 65 cm (39.4″ × H 25.6″)
Materials metal frame, hand-formed translucent textured glass discs, metal hardware
Glass discs hand-formed, translucent, textured, ~Dia. 20 cm (7.7″) each
Light source LED or incandescent candelabra bulb (sold separately)
Bulb base E14 or E12 candelabra
Recommended bulb 4–5 W LED Warm White 2700 K, candle or flame shape, frosted preferred
Bulb count 4 (45 cm), 6 (60 cm), 8 (80 cm), 10 (100 cm)
Maximum wattage 15 W per bulb, scaling with bulb count by size
Voltage AC 110–240 V
Control standard wall switch (not included); dimmable with a compatible LED bulb and dimmer
Mounting hardwired ceiling chandelier, ceiling junction box required
Junction box use a ceiling box rated for the fixture weight, about 12 kg (27 lb) at the largest size
Suspension two-piece rod, 30 cm + 20 cm = 50 cm (19.7″) total
Environment indoor, dry locations only
Body finish Copper frame with translucent glass discs
Dimension drawing of this Clérachic chandelier, with its height, width and drop rod length marked.
Guide d’installation

This fitting hangs from a ceiling outlet box and is wired into your mains supply. Work out your hanging height before you connect anything - it is far easier to set the drop with the wiring still loose than to redo it afterwards.

Before you start

  • Mounting: the fitting secures to a standard ceiling outlet box. The bracket and fixings are in the box.
  • Weight: check that your outlet box and ceiling can carry the fitting. Weights are listed in the Product Specifications above. A heavy chandelier may need a brace fitted between the joists.
  • Hanging height: the supplied cord, chain or rod can be shortened. Over a dining table, a drop that leaves roughly 75 to 90 cm between the table top and the bottom of the shade suits most rooms.
  • Ceiling type: every model suits a flat ceiling. Sloped-ceiling compatibility is stated per product in the Product Specifications above.
  • Power: these fittings are hardwired. They do not plug into a socket.
  • Dimming: models with a replaceable bulb can usually be dimmed with a compatible dimmer. Integrated LED models generally cannot.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire strippers
  • Wire nuts or terminal connectors (supplied)
  • Step ladder, and a second person for anything heavy or wide
  • Drill, if you are fitting a new outlet box or bracing the ceiling

Installation

1. Switch off the power

Turn the lighting circuit off at the consumer unit or breaker panel - the wall switch is not enough. Test at the ceiling outlet with a voltage tester and confirm the wires are dead.

2. Fit the mounting bracket

Screw the supplied bracket to the ceiling outlet box with the screws provided. Tighten evenly and check that it sits flat and square; a bracket that is not level will show in the finished hang.

3. Set the hanging height

Adjust the cord, chain or rod to the drop you want before you make any electrical connection. Lock the length using the canopy adjuster or the grip inside the canopy. Where a cord is shortened, coil the surplus neatly inside the canopy rather than cutting it - that keeps the height adjustable later.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Secure each connection with a connector and press the wiring gently up into the box. Nothing should be trapped between the canopy and the ceiling when you close it.

5. Fix the fitting to the bracket

Lift the canopy or backplate onto the bracket and fasten it with the screws or decorative caps supplied. Work up to a firm fit rather than forcing it - decorative caps and plated threads strip easily.

6. Fit the bulbs

Fit the bulb type and wattage listed in the Product Specifications above. Where several sockets share one shade, use identical bulbs so the colour and brightness match across the fitting.

7. Restore power and test

Switch the circuit back on and test the light, including the dimmer if you have fitted one. Isolate the power again before re-opening anything.

Important tips

  • Follow the wiring rules that apply where you live, and use a qualified electrician for high ceilings, sloped mounts or anything you are unsure of.
  • Have someone hold a wide or heavy fitting while you make the connections. Do not let it hang on its wiring at any point.
  • Clean glass and crystal with a dry, soft cloth. Do not spray cleaner onto a fitting that is wired in.
  • Do not over-tighten decorative parts: they are finished, not structural.

If anything about the fitting, the drop or the wiring is unclear, email info@clerachic.com and a person will answer you.

Pourquoi vous allez l’adorer
  • Hand-formed glass discs, each with its own surface texture
  • Tiered cascade of discs gives depth and rhythm overhead
  • Four sizes from 45 to 100 cm, with 4, 6, 8 or 10 candelabra bulbs
  • Polished copper-tone metal frame on a two-piece 50 cm drop rod
Combien coûte la livraison ?

Livraison gratuite vers France pour toute commande, sans montant minimum.

Chaque pièce est fabriquée sur commande. Prévoyez donc un délai total de 7 à 12 jours ouvrés. Commandez aujourd’hui et vous pouvez vous attendre à le recevoir entre 10 November et 17 November.

Et si ce n’était pas correct ?

Vous avez 30 jours pour le renvoyer. S’il ne vous convient pas, il est facile de le retourner.

Besoin d’aide ?

Nous sommes à un e-mail à info@clerachic.com — de vraies personnes, avant comme après votre achat.

Options de paiement
Méthodes de paiement
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Doux pour les yeux

Une lueur douce et chaleureuse qui apaise la pièce, sans jamais être agressive ou clinique.

Conçu pour durer

Des matériaux de qualité rigoureusement sélectionnés et un design réfléchi, conçus pour durer des années.

Livraison gratuite, toujours

Livraison gratuite vers France pour toute commande, sans montant minimum.

30 jours pour décider

Vivez d’abord avec. Si cela ne vous convient pas, retournez-le sous 30 jours, sans tracas.

Vous pourriez aussi aimer...

Conçu pour inspirer. Fait pour durer.

Chaque pièce est sélectionnée à la main pour sa qualité de fabrication, sa fonctionnalité et les petits détails que la plupart des marques négligent. Si nous ne la garderions pas pour nous, nous ne vous la vendons pas — et chaque commande bénéficie de la livraison gratuite et d’un délai de 30 jours pour changer d’avis.

Des questions avant d’acheter ? Nous sommes de vraies personnes, à un e-mail près, à l’adresse info@clerachic.com.