Black iron and handblown glass make up this wall light. An adjustable arm and a counterweight hold the shade at any height or angle. It takes G9 bulbs, LED or Edison, so the colour of the light is yours to set.
Choose 70 x 50 cm or 118 x 98 cm, in a left or right version, with a US, UK, AU or EU plug. An inline switch on the 150 cm (59″) cord turns it on and off. Suits bedsides, reading nooks and desks.
제품 사양
Dimensions, Left / Right, 70 x 50 cm
∅70 cm × H 50 cm (27.6″ × H 19.7″)
Dimensions, Left / Right, 118 x 98 cm
∅118 cm × H 98 cm (46.5″ × H 38.6″)
Material
Iron, metal, glass
Light source
LED bulb or Edison bulb
Bulb base
G9
Voltage
AC 110–240 V
Control
Inline on/off switch
Cord
150 cm (59″)
Mounting
Wall
Finish
Black
Best for
Bedroom walls beside a bed, living room reading nooks, home offices above a desk or console table, and dining room accents where you want adjustable, focused light.
설치 안내서
Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.
Before you start
Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.
Tools you may need
Screwdriver
Voltage tester
Wire nuts or terminal connectors (supplied with hardwired models)
Drill and a bit suited to your wall, if you are making a new fixing point
Spirit level and pencil
If your light is hardwired
1. Switch off the power
Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.
2. Remove the old fitting
If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.
3. Fit the mounting bracket
Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.
4. Connect the wiring
Live to live: black, brown, or the terminal marked L
Neutral to neutral: white, blue, or the terminal marked N
Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw
Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.
5. Mount the fitting
Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.
6. Fit the bulb
If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.
7. Restore power and test
Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.
If your light is plug-in
Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.
If your light is rechargeable
Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.
Important tips
Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
Check the outlet box is sound and can carry the weight of the fitting before you mount it.
Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.
If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.
마음에 드는 이유
Adjustable arm — angle the shade to where you need the light
Counterweight keeps the shade steady at any height or angle
Solid iron frame with a handblown glass shade, in black
Inline on/off switch on the cord, within easy reach
배송비는 얼마인가요?
모든 주문에 대해 최소 주문 금액 없이 프랑스 무료 배송이 제공됩니다.
각 제품은 주문 제작되므로 전체 제작 및 배송에 영업일 기준 7~12일이 소요됩니다.
오늘 주문하시면 3 November부터 10 November 사이에 받아보실 수 있습니다.
만약 그게 옳지 않다면?
반품할 수 있는 기간은 30일입니다. 마음에 들지 않으면 쉽게 반품할 수 있습니다.
도움이 필요하신가요?
info@clerachic.com으로 이메일 한 통만 보내 주세요. 구매 전후 언제든 실제 담당자가 답변해 드립니다.
결제 옵션
결제 방법
눈이 편안해요
공간을 차분하게 유지해 주는 부드럽고 따뜻한 빛—거칠거나 차갑지 않습니다.
오래도록 사용할 수 있도록 제작
품질이 검증된 소재와 세심하게 고려한 디자인으로, 수년간 사용할 수 있도록 제작했습니다.
언제나 무료 배송
모든 주문에 대해 최소 주문 금액 없이 프랑스 무료 배송이 제공됩니다.
결정할 수 있는 30일
먼저 사용해 보세요. 마음에 들지 않으면 30일 이내에 번거로움 없이 반품할 수 있습니다.
Customer Reviews
Overall rating: 4.9 / 5 from 16 reviews.
They look so pretty in our bedroom and add the perfect amount of light for reading or for ambient lighting in the room.
Store owner replied:
So pleased with how this came together for you. Thank you for sharing. At your disposal any time, Gerome
I ordered this lamp to install it on the wall next to my desk so that the entire desk area would be illuminated. It's quite large, which is exactly what I needed.
Store owner replied:
Thank you for taking the time to share this, it means a lot to us. All the best, Jannice :)
Love this light fixture. Very industrial look and a great addition to our house. The Edison lights we put in it aren't too harsh, which is a personal preference for the look. Overall, this is a great light fixture!
Store owner replied:
Lovely to see it installed. Thank you for sharing. Have a lovely day, Jannice :)
Hang beside bed. Perfect for the lighting I need above my bed, it can be easily mounted on the wall. It gives a soft glow when I read, which makes my eyes less tired.