A brass-finish body with matte black metalware forms this lamp, a light for the bedside or a desk. It takes a G9 LED or Edison bulb. The shape suits modern homes as well as more traditional ones.
It plugs in with a cord and a push-button switch, so the lamp sits wherever an outlet is in reach. Choose a US, UK, AU or EU plug. The brass and black finish is the one version sold.
제품 사양
Dimensions
D 15 cm × W 28 cm × H 52 cm (D 5.9″ × W 11″ × H 20.5″)
Materials
brass, metal
Light source
LED bulb or Edison bulb
Bulb base
G9
Voltage
AC 110–240 V
Control
push-button switch, not dimmable
Dimming
the bulb provided by default does not support dimming
Mounting
table
Finishes
Brass and Black
설치 안내서
These lamps are free-standing and need no wiring. Most are ready to use within a few minutes of unpacking. The steps below cover mains, rechargeable and solar models - check which one you have in the Product Specifications above before you begin.
Before you start
Placement: put the lamp on a flat, stable surface, away from doorways and walkways where it can be knocked. Floor lamps want their base clear of rugs that could rock them.
Power: your lamp runs from a mains plug, a built-in rechargeable battery, or a solar panel. The Product Specifications above say which.
Indoors or out: only use a lamp outside if its rating allows it. Keep any lamp that is not rated for damp away from sinks, baths and open windows.
Dimming: some models have a switch or touch control that dims; others work with a plug-in dimmer. The specification above states what your model offers.
Bulbs: where a bulb is replaceable, use the type and wattage listed. Never exceed the wattage printed on the socket.
Tools you may need
None for most models
A small screwdriver, if your lamp has a battery cover or a shade to attach
An extension lead, if the nearest socket is some distance away
Setting up
1. Unpack and check
Take the lamp out carefully and keep the packaging until you are satisfied with it. Check for damage in transit and that every part listed is present. Where a shade or base ships separately, fit it by hand or with a small screwdriver - hand-tight is enough.
2. Choose the position
Stand the lamp on a level surface that will take its weight without flexing. For a reading lamp, the bottom of the shade sitting a little above eye level when you are seated puts the light on the page and keeps the bulb out of view.
3. Connect the power
Mains: plug it into a nearby socket and route the cable so it is not stretched or walked on. Outdoors, use a weatherproof socket or an outdoor-rated extension.
Rechargeable: charge it fully before first use. The battery compartment is usually under the base. Fit the specified battery type the right way round and close the cover.
Solar: stand the panel in direct sun. The first full charge can take a day of good daylight, and performance in the first days is not a fair test of the battery.
4. Fit or check the bulb
If your lamp takes a replaceable bulb, screw it in gently until it seats. Do not force it. Integrated LED models have no bulb to fit and are not designed to be opened.
5. Switch on and adjust
Use the switch, touch control or remote to turn the lamp on, then set the brightness or colour mode if your model offers them. Motion-activated and solar models may not behave predictably until they have completed a full charge cycle.
Important tips
Follow the safety notes printed on the lamp and in its manual.
Do not use an indoor-only lamp outdoors, even under cover.
Recharge or replace batteries before they run flat repeatedly - deep discharge shortens battery life.
Wipe a solar panel clean from time to time; a dusty panel charges noticeably more slowly.
Unplug a mains lamp during a thunderstorm or if you are away for a long period.
Keep the cable of a floor lamp behind the furniture rather than across the floor, and leave a little slack where it enters the base so the joint is never under tension.
If anything about setting the lamp up is unclear, email info@clerachic.com and a person will answer you.
마음에 드는 이유
Brass finish set against matte black metalware
Plug-in with a 150 cm cord and a push-button switch
Reading light for the bedside or a desk, 52 cm tall
Dims when you fit a dimmable bulb; the switch itself does not dim
배송비는 얼마인가요?
모든 주문에 대해 최소 주문 금액 없이 프랑스 무료 배송이 제공됩니다.
각 제품은 주문 제작되므로 전체 제작 및 배송에 영업일 기준 7~12일이 소요됩니다.
오늘 주문하시면 10 November부터 17 November 사이에 받아보실 수 있습니다.
만약 그게 옳지 않다면?
반품할 수 있는 기간은 30일입니다. 마음에 들지 않으면 쉽게 반품할 수 있습니다.
도움이 필요하신가요?
info@clerachic.com으로 이메일 한 통만 보내 주세요. 구매 전후 언제든 실제 담당자가 답변해 드립니다.
결제 옵션
결제 방법
눈이 편안해요
공간을 차분하게 유지해 주는 부드럽고 따뜻한 빛—거칠거나 차갑지 않습니다.
오래도록 사용할 수 있도록 제작
품질이 검증된 소재와 세심하게 고려한 디자인으로, 수년간 사용할 수 있도록 제작했습니다.
언제나 무료 배송
모든 주문에 대해 최소 주문 금액 없이 프랑스 무료 배송이 제공됩니다.
결정할 수 있는 30일
먼저 사용해 보세요. 마음에 들지 않으면 30일 이내에 번거로움 없이 반품할 수 있습니다.
Customer Reviews
Overall rating: 5.0 / 5 from 5 reviews.
The lamp is perfect for my bedside table and is just what I need. Assembly was very easy. The lamp is solid and seems well made.