Four globe bulbs with visible filaments hang on black cables from four copper rings on a pale studio backdrop, this Clérachic pendant in its smallest layout.

스파이더 펜던트 조명, 구리 마감, 전구 노출형 샹들리에

헤드 3개, 12 cm / 구리색

€263,00

스파이더 펜던트 조명, 구리 마감, 전구 노출형 샹들리에

€263,00

부가세 포함, 무료 배송 및 간편한 반품

ARRIVES IN 프랑스 WITHIN OCT 30–NOV 4

An industrial multi-bulb chandelier with exposed Edison bulbs on individual cables from a copper-finished canopy. Each cable passes through a hook ring, and the sockets, rings and canopy share the copper finish. It is hardwired and mounts on the ceiling.

Choose 3, 5, 8, 12 or 15 heads. Small dining areas and breakfast bars suit the lower counts; lofts, stairwells and entries suit the higher ones. Bulbs are sold separately.

Dimensions, 3 heads	∅12 cm (4.7″)
Dimensions, 5 / 8 heads	∅15 cm (5.9″)
Dimensions, 12 / 15 heads	∅20 cm (7.9″)
Material	Metal (copper-finished canopy, sockets, hook rings)
Light source	LED or Edison bulb
Bulb base	E26 (US/CA) or E27 (EU/AU)
Bulbs	Sold separately; a test bulb is included with the order
Voltage	AC 110–240 V
Control	Compatible with standard wall switches (not included)
Wiring	Hardwired, junction box required
Mounting	Ceiling
Cable	150 cm (59.1″), adjustable per cable
Best for	3 heads: small dining, breakfast bar, entryway; 5 heads: medium dining, kitchen island; 8 heads: large dining, loft living, café; 12 heads: great room, stairwell, double-height entry; 15 heads: statement piece, hospitality lobby, restaurant

Dimension drawing of this Clérachic pendant with nine heads, with its height and width marked.

Dimension drawing of this Clérachic pendant in a fifteen-head layout, with the canopy diameter marked.

Dimension drawing of this Clérachic pendant with three heads, with its height and width marked.

Dimension drawing of this Clérachic pendant with five heads, with its height and width marked.

Dimension drawing of this Clérachic pendant with eight heads, with its height and width marked.

Dimension drawing of this Clérachic pendant with a large cluster of heads, with the canopy diameter marked.

Dimension drawing of this Clérachic pendant with a large head count, with the canopy diameter marked.

This fitting hangs from a ceiling outlet box and is wired into your mains supply. Work out your hanging height before you connect anything - it is far easier to set the drop with the wiring still loose than to redo it afterwards.

Before you start

Mounting: the fitting secures to a standard ceiling outlet box. The bracket and fixings are in the box.
Weight: check that your outlet box and ceiling can carry the fitting. Weights are listed in the Product Specifications above. A heavy chandelier may need a brace fitted between the joists.
Hanging height: the supplied cord, chain or rod can be shortened. Over a dining table, a drop that leaves roughly 75 to 90 cm between the table top and the bottom of the shade suits most rooms.
Ceiling type: every model suits a flat ceiling. Sloped-ceiling compatibility is stated per product in the Product Specifications above.
Power: these fittings are hardwired. They do not plug into a socket.
Dimming: models with a replaceable bulb can usually be dimmed with a compatible dimmer. Integrated LED models generally cannot.

Tools you may need

Screwdriver
Voltage tester
Wire strippers
Wire nuts or terminal connectors (supplied)
Step ladder, and a second person for anything heavy or wide
Drill, if you are fitting a new outlet box or bracing the ceiling

Installation

1. Switch off the power

Turn the lighting circuit off at the consumer unit or breaker panel - the wall switch is not enough. Test at the ceiling outlet with a voltage tester and confirm the wires are dead.

2. Fit the mounting bracket

Screw the supplied bracket to the ceiling outlet box with the screws provided. Tighten evenly and check that it sits flat and square; a bracket that is not level will show in the finished hang.

3. Set the hanging height

Adjust the cord, chain or rod to the drop you want before you make any electrical connection. Lock the length using the canopy adjuster or the grip inside the canopy. Where a cord is shortened, coil the surplus neatly inside the canopy rather than cutting it - that keeps the height adjustable later.

4. Connect the wiring

Live to live: black, brown, or the terminal marked L
Neutral to neutral: white, blue, or the terminal marked N
Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Secure each connection with a connector and press the wiring gently up into the box. Nothing should be trapped between the canopy and the ceiling when you close it.

5. Fix the fitting to the bracket

Lift the canopy or backplate onto the bracket and fasten it with the screws or decorative caps supplied. Work up to a firm fit rather than forcing it - decorative caps and plated threads strip easily.

6. Fit the bulbs

Fit the bulb type and wattage listed in the Product Specifications above. Where several sockets share one shade, use identical bulbs so the colour and brightness match across the fitting.

7. Restore power and test

Switch the circuit back on and test the light, including the dimmer if you have fitted one. Isolate the power again before re-opening anything.

Important tips

Follow the wiring rules that apply where you live, and use a qualified electrician for high ceilings, sloped mounts or anything you are unsure of.
Have someone hold a wide or heavy fitting while you make the connections. Do not let it hang on its wiring at any point.
Clean glass and crystal with a dry, soft cloth. Do not spray cleaner onto a fitting that is wired in.
Do not over-tighten decorative parts: they are finished, not structural.

If anything about the fitting, the drop or the wiring is unclear, email info@clerachic.com and a person will answer you.

Each cable adjustable to 150 cm — you choose how far every bulb hangs
Hook rings hold your drape — fan, cascade or asymmetric, and it stays put
Copper finish on canopy, sockets and hook rings — a warm industrial look
Five configurations, 3 to 15 heads — from a breakfast bar to a double-height entry