Clérachic's black bar chandelier hangs its sweeping fan shape against a plain grey studio backdrop.

거실용 화이트 샹들리에, 회전형 바, 길이 150 cm

바 10개, 49 × 47 cm / 나이트 블랙

€379,00

거실용 화이트 샹들리에, 회전형 바, 길이 150 cm

€379,00

부가세 포함, 무료 배송 및 간편한 반품.

스타일

색상

Waves hangs on a rotating centre axis, so once this chandelier is up you can still turn each bar to line up with a kitchen island or a table rather than guessing the angle before it's mounted.

Four sizes scale the pattern from a compact 49 cm run to a full 200 cm span, in aluminium frames finished black or white, with a frosted acrylic lens diffusing every bar into a soft, even glow rather than a row of points.

Dimensions, 10 Bars	length 49 cm (19.3″), width 47 cm (18.5″)
Dimensions, 20 Bars	length 100 cm (39.4″), width 47 cm (18.5″)
Dimensions, 30 Bars	length 150 cm (59.1″), width 47 cm (18.5″)
Dimensions, 40 Bars	length 200 cm (78.7″), width 47 cm (18.5″)
Weight	6 kg (13.2 lb)
Material	acrylic, aluminium
Finish	Black, White
Light source	integrated LED
Dimming	available on request, email info@clerachic.com
Voltage	AC 90–260 V
Mounting	hardwired
Cord length	up to 2 m (6.6 ft)
Adjustable cord	Yes
Canopy	length 70 cm (27.6″) × width 7.5 cm (3″) × height 3.5 cm (1.4″)
Sloped ceiling	Yes
Certifications	UL, CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, RoHS, SAA, VDE
Wattage, 10 Bars	50 W (5500 lm)
Wattage, 20 Bars	100 W (11000 lm)
Wattage, 30 Bars	150 W (16500 lm)
Wattage, 40 Bars	200 W (22000 lm)

Technical dimension drawing of the Clérachic White Chandelier for Living Room, Rotating Bars, 150 cm Long in 4 sizes — 10 Bars at 49 × 47 cm (19.3 × 18.5″), 20 Bars at 100 × 47 cm (39.4 × 18.5″), 30 Bars at 150 × 47 cm (59.1 × 18.5″), 40 Bars at 200 × 47 cm (78.7 × 18.5″), drawn to one scale.

This fitting hangs from a ceiling outlet box and is wired into your mains supply. Work out your hanging height before you connect anything - it is far easier to set the drop with the wiring still loose than to redo it afterwards.

Before you start

Mounting: the fitting secures to a standard ceiling outlet box. The bracket and fixings are in the box.
Weight: check that your outlet box and ceiling can carry the fitting. Weights are listed in the Product Specifications above. A heavy chandelier may need a brace fitted between the joists.
Hanging height: the supplied cord, chain or rod can be shortened. Over a dining table, a drop that leaves roughly 75 to 90 cm between the table top and the bottom of the shade suits most rooms.
Ceiling type: every model suits a flat ceiling. Sloped-ceiling compatibility is stated per product in the Product Specifications above.
Power: these fittings are hardwired. They do not plug into a socket.
Dimming: models with a replaceable bulb can usually be dimmed with a compatible dimmer. Integrated LED models generally cannot.

Tools you may need

Screwdriver
Voltage tester
Wire strippers
Wire nuts or terminal connectors (supplied)
Step ladder, and a second person for anything heavy or wide
Drill, if you are fitting a new outlet box or bracing the ceiling

Installation

1. Switch off the power

Turn the lighting circuit off at the consumer unit or breaker panel - the wall switch is not enough. Test at the ceiling outlet with a voltage tester and confirm the wires are dead.

2. Fit the mounting bracket

Screw the supplied bracket to the ceiling outlet box with the screws provided. Tighten evenly and check that it sits flat and square; a bracket that is not level will show in the finished hang.

3. Set the hanging height

Adjust the cord, chain or rod to the drop you want before you make any electrical connection. Lock the length using the canopy adjuster or the grip inside the canopy. Where a cord is shortened, coil the surplus neatly inside the canopy rather than cutting it - that keeps the height adjustable later.

4. Connect the wiring

Live to live: black, brown, or the terminal marked L
Neutral to neutral: white, blue, or the terminal marked N
Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Secure each connection with a connector and press the wiring gently up into the box. Nothing should be trapped between the canopy and the ceiling when you close it.

5. Fix the fitting to the bracket

Lift the canopy or backplate onto the bracket and fasten it with the screws or decorative caps supplied. Work up to a firm fit rather than forcing it - decorative caps and plated threads strip easily.

6. Fit the bulbs

Fit the bulb type and wattage listed in the Product Specifications above. Where several sockets share one shade, use identical bulbs so the colour and brightness match across the fitting.

7. Restore power and test

Switch the circuit back on and test the light, including the dimmer if you have fitted one. Isolate the power again before re-opening anything.

Important tips

Follow the wiring rules that apply where you live, and use a qualified electrician for high ceilings, sloped mounts or anything you are unsure of.
Have someone hold a wide or heavy fitting while you make the connections. Do not let it hang on its wiring at any point.
Clean glass and crystal with a dry, soft cloth. Do not spray cleaner onto a fitting that is wired in.
Do not over-tighten decorative parts: they are finished, not structural.

If anything about the fitting, the drop or the wiring is unclear, email info@clerachic.com and a person will answer you.