• Clérachic white cone-shade wall lamp on a swing arm lighting the wall above a pale wooden bed headboard in a bedroom.
  • Clérachic black wall lamp with a cone shade on a long swing arm, lit, against a warm limewash-style wall in a room.
  • Clérachic black cone-shade wall lamp with a chrome swing arm and slim back plate, switched off, on a warm textured wall.
  • Clérachic black cone-shade wall lamp with a thin black plug-in cord hanging below its back plate, lit on a warm wall.
  • Clérachic red cone-shade wall lamp on a chrome swing arm and red back plate, lit, against a warm limewash-style wall.
  • Clérachic red cone-shade wall lamp with a black plug-in cord below the red back plate, lit on a warm textured wall.
  • Clérachic white cone-shade wall lamp with a chrome swing arm and white back plate, lit, on a warm textured wall.
  • Clérachic white cone-shade wall lamp with a plug-in cord running down from the back plate, lit on a warm wall.
  • Clérachic cream-white cone-shade wall lamp with a clear plug-in cord, lit above a side table with a framed bird print in a room.
  • Clérachic white cone-shade wall lamp on a long chrome swing arm, casting a pool of light above a striped pillow in a bedroom.
  • Clérachic red cone-shade wall lamp swung out sideways on its chrome arm, with a white plug-in cord, glowing on a pale wall.
  • Clérachic red cone-shade wall lamp lit above a vase of white tulips and a Bauhaus-style art print in a bright room.
  • Clérachic black cone-shade wall lamp with a thin cord, lit beside a framed film poster above a black leather sofa in a room.
  • Clérachic red cone-shade wall lamp seen close up, with chrome hinged swing arm, red back plate and black plug-in cord, on a white wall.
  • Clérachic black cone-shade wall lamp with a glossy shade and chrome swing arm, studio shot on a pale wall beside dried flowers.
  • Clérachic black cone-shade wall lamp with the arm folded in and a black plug-in cord, on a pale wall above a white vase.
  • Clérachic black cone-shade wall lamp close up, lit, with the telescopic chrome arm extended and a thin cord on a grey wall.

Adjustable Wall Light, Telescopic Arm Sconce, Plug In or Hardwired

$513Incl. VAT & Free Shipping
1

Arrives in United States within Nov 30–Dec 7

Description

A metal swing-arm wall light with a 25 cm (9.8″) cone shade on a telescopic arm that rotates 180°. One E27 LED bulb is included, giving 15 W of warm white 3000 K light.

Choose black, red or white, and either a hardwired version or one with a plug-in cord. Aim the light over a bedside, along a hallway or across a living room wall.

Shipping & delivery

Free shipping to United States on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Clérachic wall light dimension drawing, every measurement marked in centimetres and inches.
The details

Everything you need to know before it arrives

A wall lamp in black, red or white with an adjustable telescopic arm that rotates 180°, so you aim the light where you need it. Hardwired or plug-in.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions, shade
∅25 cm (9.8″), height 26 cm (10.2″)
Dimensions, wall mount
width 5 cm (2″), height 26 cm (10.2″)
Wattage
15 W (1500 lm)
Weight
2 kg (4.4 lb)
Material
metal
Finish
black, red or white, as chosen in the cart
Light source
LED bulb (replaceable)
Bulbs
1 × E27, included
Dimming
available on request, email info@clerachic.com
Voltage
AC 90–260 V
Show more
Mounting
wall-mounted; hardwired, or with a plug-in cord, as chosen in the cart
Canopy
width 5 cm (2″) × height 26 cm (10.2″)
Certifications
UL, CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, RoHS, SAA, VDE
Light colour
warm white (3000 K)
In the room

See it in the room

Clérachic red cone-shade wall lamp lit above a vase of white tulips and a Bauhaus-style art print in a bright room.
Clérachic white cone-shade wall lamp on a long chrome swing arm, casting a pool of light above a striped pillow in a bedroom.
Clérachic white cone-shade wall lamp on a swing arm lighting the wall above a pale wooden bed headboard in a bedroom.
Clérachic red cone-shade wall lamp seen close up, with chrome hinged swing arm, red back plate and black plug-in cord, on a white wall.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Telescopic arm rotates 180° — aim the light where you need it
  • Black, red or white — hardwired or plug-in cord version
  • 25 cm (9.8″) cone shade — on a slim 5 × 26 cm wall plate
  • 15 W LED, 1500 lm — one E27 bulb included, 3000 K
Complete the room

You might also like...

FAQ

Questions, answered

Can I move the arm?

Yes. The telescopic arm extends and rotates through 180°, so you can aim the light at a book, a bedside table or the wall.

Is it hardwired or plug-in?

Both are sold. Choose a Wiring style for the hardwired version or a Plug in Electricity style for the version with a plug-in cord, in black, red or white.

Which bulb does it take?

One E27 LED bulb, 15 W (1500 lm), is included and replaceable. It gives warm white light at 3000 K.

Can I dim it?

Not as standard. Dimming is available on request: email info@clerachic.com before you order.

How big is it?

The shade is 25 cm (9.8″) across and 26 cm (10.2″) high, and the wall plate is 5 cm (2″) wide and 26 cm (10.2″) high. The lamp weighs 2 kg (4.4 lb).

How do I fit it?

It mounts on the wall. The hardwired version connects to the wall supply; the steps are in the Installation guide on this page. The plug-in cord version runs from the back plate.

What voltage does it use?

It runs on AC 90–260 V.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Clérachic black wall lamp with a cone shade on a long swing arm, lit, against a warm limewash-style wall in a room.
Free advice before you buy

Not sure it suits your room?

Tell us about the space and the ceiling height, and a person on the team will tell you how it will look and fit.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.