Natural Alabaster Wall Lamp, Flower Design, Warm LED, 1 to 9 Heads

Light behaves differently once it has to pass through alabaster — thin enough in places to glow, thick enough elsewhere to take the edge off every ray coming through. Cut into a flower silhouette and set flush against the wall, this sconce throws that same honeyed warmth sideways across a bedroom or living-room wall rather than down onto a tabletop, and because each shade is carved from real stone, no two pieces share quite the same veining or the same degree of translucency. Even the finished stone length drifts a centimeter or two from piece to piece — proof it came out of the ground rather than off a production mould. Set a single bloom beside a mirror, or run the five, seven, or nine-head version along a longer run of wall, and the same warm glow scales from a quiet accent to a full feature wall without ever turning harsh.

Features

• Natural alabaster shade — carved from real stone, so the veining and translucency are unique to your piece rather than printed or moulded on.
• Pick your head count — from a single bloom to a nine-head run, so the fixture scales from a narrow hallway wall to a full feature wall.
• Triac dimmable — pair it with a Triac dimmer switch (sold separately) to bring the warm glow down low for evenings.
• Built-in LED, ready to wire — every head houses its own integrated SMD LED module rather than a screw-in bulb, so there's nothing to source or swap later, and wattage simply climbs with the head count, from 7W on the single head to 36W on the nine-head version.

Fitting it

It's hardwired, so have an electrician fit it, or wire it in yourself if you're comfortable with basic wiring — it's a straightforward job, and it suits indoor rooms of roughly 5 to 15 square meters (54–161 sq ft), such as a bedroom, living room, or hallway. It ships set to warm white (3000K) as standard; email us before you order if you'd like a different colour temperature. Assembly is required once it arrives, and each order is a single, complete wall lamp built to run off an ordinary wall switch rather than any dedicated controller.

Available sizes

From 3 heads up, the fixture holds the same 5.12" (13 cm) height and simply extends in length, so a bigger head count reads as a wider spread of alabaster across the wall rather than a taller one — worth knowing if you're planning around a headboard or a piece of art.

Specifications

Frequently asked questions

Will every piece look identical?
No — alabaster is a natural stone, so veining and overall stone length vary by roughly 1–3 cm (0.4–1.2"), and yours may look slightly different from the photos.

Can I get a different light colour?
It ships in warm white (3000K) as standard. Email info@clerachic.com before you order if you'd prefer a different colour temperature.

Do I need a particular dimmer?
If you go with the dimmable version, we'd recommend pairing it with a Triac dimmer switch for the smoothest results.

How many heads is right for my space?
A single head works well beside a mirror or along a narrow hallway wall, while the 5, 7, or 9-head versions suit a wider feature over a bed or sofa, in a room of roughly 5 to 15 square meters.

Is assembly required?
Yes — it arrives needing assembly, and ships as one complete wall lamp with the LED already fitted, ready to wire into a standard wall switch.

Will it work with an ordinary light switch?
Yes — it's built for a common wall switch (not included), plus a Triac dimmer switch if you pick the dimmable version, rather than any proprietary controller.

Can I fit it in a bathroom or other damp space?
No — it's rated IP20 for standard indoor rooms only, so keep it clear of showers, tubs, and other damp areas.

Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.