Linear Loop Chandelier, Alabaster, Integrated LED, 3 Lengths

A run of natural alabaster loops, each one linked into the next, carried the length of a table instead of gathering at a single point. Unlit, the stone reads as soft creamy white with grey veining that changes from loop to loop. Switched on, the integrated LED lights it from inside, so the veins show as darker threads and the whole piece reads as one continuous line of light rather than a row of separate lamps. The shortest model measures 110 cm (43.3″); the longest runs 200 cm (78.7″), enough to hold the centre of a full-length dining table or an open stairwell on its own. Across the loops it sits 58 to 60 cm (22.8″ to 23.6″), narrow enough to stay inside the width of the table below it.

What makes it work

• Loops cut from natural alabaster — the stone is quarried, not moulded, so the veining running through your fixture belongs to it alone.
• Integrated LED — the light source is built in and lights the stone from within, so there is no bulb to source, no socket on show and no dark gap between loops.
• Suspended on fine cables — several slim cables carry the run and keep it level across its full length, with 150 cm (59″) of drop to work with.

Choosing warm, cool or dimmable

Four builds are offered on every size, and the choice is worth a moment because the LED is fixed at manufacture. Warm Light is the one for a dining room or a living space — it pushes the alabaster towards honey and makes the veining read warmer. Cool Light keeps the stone closer to true white and holds its edge better over a kitchen island or a stairwell lit by daylight. The two Triac builds give you the same warm or cool tone on a leading-edge (TRIAC) dimmable driver, so they run on a standard wall dimmer. Plain Warm Light and Cool Light do not dim, so if a dimmer matters to you, choose one of the Triac options at checkout.

Good to know before you order

• Alabaster is a natural stone, so colour and veining vary from piece to piece. The photographs show the character of the material, not the exact pattern that will reach you.
• A black canopy ships as standard. A white rectangular canopy can be built instead — ask before you order and we will set it up.
• Rated IP20. That covers dry indoor rooms and carries no moisture protection at all, so it is not for a bathroom, a wet room or a covered outdoor space.

Installation

The fixture hardwires to a ceiling point and runs on AC 110-240 V, so it suits mains supply in any market. Set the drop before anything else: over a dining table the base of a chandelier usually sits 76 to 91 cm (30″ to 36″) above the tabletop, and you have 150 cm (59″) of cable to work within. Fix into a joist or a rated brace rather than plasterboard alone, particularly on the 200 cm (78.7″) size. Have an electrician make the connection if you'd rather not touch the wiring, or fit it yourself if you're comfortable with basic ceiling wiring — it's a straightforward job.

Available sizes

Specifications

Measured drawings and the installation guide are available on request — email info@clerachic.com and we will send them over.

Frequently asked questions

Can I put this on a dimmer?
Yes, if you order a Triac build. Every size is offered as Triac Warm Dimming or Triac Cool Dimming, both wired for a standard leading-edge (TRIAC) wall dimmer. The plain Warm Light and Cool Light builds do not dim.

Do I need to buy bulbs?
No. The LED is integrated, so there is nothing to source or fit — you choose warm or cool light when you order instead.

How long is each size, and how far does it hang?
Model A is 110 cm (43.3″) long, Model B 150 cm (59″) and Model C 200 cm (78.7″). All three stand 30 to 35 cm (11.8″ to 13.8″) tall and hang with 150 cm (59″) of drop.

Can it go in a bathroom?
No. It is rated IP20, which covers dry indoor rooms only and gives no protection against moisture.

Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.