A solid ring of natural alabaster hangs face-on from a stitched leather strap that runs through its centre and up to a round brass ceiling canopy — no cord, no rod, no metal shade. The smaller ring measures 30 cm (11.8″) across and the same tall, so it clears a bedside table without crowding it; the larger is 40 cm (15.7″), the one to hang over a dining table or a kitchen island. Unlit it reads as a pale stone hoop against brass. Switched on, the stone carries the light instead of blocking it: alabaster is translucent, so the ring glows from within and the veining shows through the surface rather than being lit from outside.

What makes it work
-
A leather strap instead of a cord — a stitched leather strap 1 m (39.4″) long carries the ring from the canopy, so the suspension is part of the design rather than something to disguise.
-
Solid natural alabaster — real stone, cut and finished as one piece, which is what turns a bright LED into a soft, even glow.
-
Built-in LED — the light source is integrated into the fixture, so there is no bulb to match, buy or fit.
Before you order
-
The LED is built in. There is no socket, which is why nothing needs buying — and also why the light source is part of the fixture rather than something you swap out later.
-
Alabaster is natural stone. Colour, veining and translucency change from piece to piece, so your ring will not match the photographs exactly. That is the material, not a fault.
-
Dry indoor rooms only. The fitting is IP20, which carries no moisture protection at all, so keep it away from bathrooms, wet rooms and covered outdoor spaces.
This is a hardwired fixture. Have an electrician make the connection if you'd rather not touch the wiring, or fit it yourself if you're comfortable with basic ceiling wiring — it's a straightforward job.
Available sizes
| Size |
Diameter × Height |
Leather strap |
| Small |
∅30 cm × H30 cm (11.8″ × 11.8″) |
1 m (39.4″), single strap through the ring |
| Large |
∅40 cm × H40 cm (15.7″ × 15.7″) |
1 m (39.4″), doubled into a loop |
Both sizes come in the same two finishes: a mid-brown strap or a dark brown strap, each against white alabaster on a brass canopy.
Specifications
| Materials |
Natural alabaster ring, brass canopy, leather suspension strap |
| Dimensions |
∅30 cm × H30 cm (11.8″ × 11.8″) or ∅40 cm × H40 cm (15.7″ × 15.7″) |
| Leather strap |
1 m (39.4″) |
| Light source |
Integrated LED |
| Voltage |
AC 110–240 V |
| Wiring |
Hardwired |
| IP rating |
IP20 — dry indoor use only, no moisture protection |

Spec sheet and installation guide available on request — email info@clerachic.com and we'll send them over.
Frequently asked questions
Which size should I choose?
Take the 30 cm (11.8″) ring for a bedside, a hallway or a reading corner, where it reads as a quiet piece of stone. Take the 40 cm (15.7″) ring where it has to hold a space on its own — over a dining table, a kitchen island or a stairwell.
Is the strap real leather?
Yes. A stitched leather strap 1 m (39.4″) long carries the ring; on the 30 cm size it passes once through the centre, and on the 40 cm size it is doubled into a loop.
Do I need to buy a bulb?
No. The LED is built into the fixture, so there is nothing to source and nothing to match — and equally, the light source is not a lamp you change yourself.
Can it go in a bathroom?
No. It is rated IP20, which carries no moisture protection, so it belongs in dry indoor rooms.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.