Ceiling Fan With Curved ABS Blades and Quiet DC Copper Motor, Remote, Three Sizes

Some ceiling fans move air. This one does it without announcing itself. Curved ABS blades sit on a pure copper DC motor so efficient it barely registers on your electricity bill, and so quiet your room stays a room — not a wind tunnel. In three diameters and four finishes, it slips into modern and transitional spaces that expect more from a ceiling fixture.

What makes it different

• Pure copper DC motor, variable frequency: draws only 35W at full tilt — runs efficiently across all five speed settings while moving a serious volume of air.
• Reversible blade rotation: point airflow downward in summer for an active cooling breeze; flip direction in winter to pull cool air up and send warm ceiling air back into the room.
• Sculpted ABS blades: the curved profile isn't decorative — it shapes airflow and looks just as considered at rest as it does in motion. Available in four finishes to match almost any interior.

Fan only — no light included

This is a standalone fan with no integrated LED, bulb fitting, or light kit. If you need a ceiling fan with built-in lighting, ask us about the matching Ceiling Fan Light version at info@clerachic.com.

Before you order — important installation notes

Fit the blade gaskets — they're not optional. The gaskets must be installed between the blades and the motor housing using the included hardware. Leaving them out puts direct stress on the motor's copper winding, which will cause damage. Follow the installation manual step by step.

Ceiling compatibility:

• Not suitable for joists with gypsum board or wood-panel ceilings — these surfaces cause vibration and noise.
• Not suitable for prefabricated ceilings. Cement concrete and solid timber beams are both fine.
• Sloped ceilings are not supported by the standard version — reach out before ordering.
• If your ceiling has circular or rectangular channels, send us the groove diameter and depth so we can confirm compatibility.

Choosing your size

Canopy ∅ 5.9″ (15 cm). Downrod 10+20 cm adjustable, extendable on request.

Finishes

• Walnut Wood Grain — deep walnut-toned ABS, rich and grounding
• Natural Wood Grain — pale oak ABS, airy and Scandinavian
• White — matte white, clean and minimal
• Black — matte black, bold and architectural

Specifications

Spec sheet and installation guide available on request at info@clerachic.com.

Frequently asked questions

Does this fan include a light fitting?
No. It is a standalone fan — no integrated LED, no bulb fitting, no light kit. If you want a ceiling fan with built-in lighting, ask us about the matching fan-with-light version.

Why are the blade gaskets mandatory?
The gaskets sit between each blade and the motor housing, absorbing the load during rotation. Without them, that force transfers directly to the motor's copper winding and causes damage. Fit them using the included hardware before the first run.

Can the rotation direction be reversed?
Yes — from the handheld remote. Forward (down-draft) cools the room in warmer months by pushing air directly down; reverse draws cool air up from floor level and recirculates the warm air sitting at ceiling height, which helps in winter.

Will my standard wall switch work with this fan?
No. The built-in receiver isn't compatible with conventional home wall switches. For wall-mounted control, a wireless wall switch is available separately. The handheld remote is included with every fan.

Can this fan be fitted to a sloped ceiling?
Not with the standard configuration. Get in touch before ordering and we'll confirm which accessories work with your ceiling angle.

How do I pick the right size?
The 42″ handles rooms up to around 15–20 m² comfortably. The 48″ works well in larger living and dining rooms. The 52″ is the right choice for extra-large or open-plan spaces. Ceiling height and room shape also play a role — if you're unsure, email us.

Questions before you buy? Reach us at info@clerachic.com. Every order ships free with no minimum, and you have 30 days to return it.