• A black Clérachic wall sconce lighting a cream wall above a grey armchair and a small wooden table.
  • A black Clérachic wall sconce with a conical shade on a long angled arm, with a small brass joint, on a plain white background.
  • This Clérachic black wall light casts a soft pool of light below its cone shade, with a potted cactus at the foot of the frame.
  • A small black Clérachic wall sconce high on a sage-green wall above a cream sofa, with a gilt-framed landscape painting.
  • A black Clérachic wall sconce lit above a bed in a loft bedroom with exposed brick, a concrete wall and a city view.
  • A black Clérachic wall light beside a window, above a navy armchair with a side table, in front of a stone fireplace.
  • A black Clérachic wall sconce above a walnut sideboard, with a mirror, a framed car photograph and a checked armchair.
  • Two black Clérachic wall sconces flanking a bold abstract print above a bed against an exposed brick wall.
  • A black Clérachic wall light angled over a dark wooden bed and bedside table, against a raw concrete wall with metal shelving.
  • A black Clérachic wall light on a white hallway wall, its cone shade angled toward a door with panelled framing.
  • A white Clérachic wall sconce with a cone shade glowing above a round wooden table, with a small plant and a sofa edge.
  • Close view of a black Clérachic wall light with a brass joint, its angled arm reaching out from a round backplate.
  • A black Clérachic wall sconce above a grey sofa, with a framed red-and-white print and a small lantern on a side table.
  • Close view of a black Clérachic cone-shade wall light on a brass-finished arm, reaching out from a black round backplate.
  • Two black Clérachic wall sconces flanking a bed with a grey throw, beside a grey curtain, in a pale bedroom.
  • Two black Clérachic wall sconces either side of a geometric wooden artwork, above a grey sofa with patterned cushions.
  • A black Clérachic wall light with a cone shade above the head of a bed with a dark metal frame.
  • A black Clérachic cone-shade wall light on a brass-finished arm, with a round black backplate, on a plain pale wall.
  • Close view of a black Clérachic wall sconce lit from below, its arm angling from a round backplate against a pale wall.
  • A white Clérachic wall sconce with an angled arm, brass joint and round backplate against a pale grey wall.

Black Wall Light, 350 Degree Rotating Conical Shade, Wall Sconce

€130Incl. VAT & Free Shipping

Size42 × 19 cm

Colour Black
1

Arrives in France within Nov 30–Dec 7

Description

A mid-century wall sconce with a conical shade on an angled arm, made from steel and aluminium. The lamp head rotates up to 350°, so you can aim the light where you need it. The shade is conical, and a round canopy finishes the join with the wall.

It is 42 cm (16.5″) wide and weighs 1 kg (2.2 lb), and it mounts to the wall on a round canopy. Choose black, white or black and gold. It takes an E26 or E27 bulb, LED or Edison, and is hardwired.

Shipping & delivery

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Size
Dimension drawing of this Clérachic wall light, 42 x 19 cm, L42 x H19 cm.
The details

Everything you need to know before it arrives

A conical shade on an angled arm with a round canopy, 42 cm wide and 19 cm tall, aimed wherever you need the light.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions
∅42 cm × H 19 cm (16.5″ × H 7.5″)
Material
Steel, aluminium, aluminium alloy
Bulb
E26 or E27 socket, LED or Edison bulb
Voltage
AC 110–240 V
Control
Works with a standard wall switch (not included), connected to an external wall switch that controls the electricity supply
Installation
Wall mount, hardwired
Lamp head rotation
Up to 350°; do not force it beyond its limit, to avoid damage
Canopy diameter
12 cm (4.7″)
Weight
1 kg (2.2 lb)
Finish
Black, white, gold
Lampshade colour
Black, white
In the room

See it in the room

A black Clérachic wall sconce lit above a bed in a loft bedroom with exposed brick, a concrete wall and a city view.
A black Clérachic wall light beside a window, above a navy armchair with a side table, in front of a stone fireplace.
A black Clérachic wall sconce above a walnut sideboard, with a mirror, a framed car photograph and a checked armchair.
Close view of a black Clérachic wall sconce lit from below, its arm angling from a round backplate against a pale wall.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Lamp head rotates up to 350° to point the light where you want it
  • Conical shade in black or white on a steel and aluminium body
  • Mid-century lines with a circular 12 cm canopy
  • Same 42 cm size in every finish, weighing 1 kg
Complete the room

You might also like...

FAQ

Questions, answered

What are the dimensions of this wall sconce?

This sconce measures 42 cm wide by 19 cm tall (16.5″ × 7.5″). The canopy is 12 cm in diameter (4.7″).

How is this wall lamp installed?

It is hardwired to your wall and controlled by an external wall switch (not included). The lamp head rotates up to 350 degrees.

What voltage does this sconce require?

This sconce operates on AC 110–240 V, so it works worldwide with standard wall current.

What finishes are available?

This sconce comes in Black, White, or Black & Gold. All variants are the same size and weight (1 kg (2.2 lb)).

What type of bulb does this sconce use?

It has an E26 or E27 bulb base and works with LED bulbs or Edison bulbs.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

This Clérachic black wall light casts a soft pool of light below its cone shade, with a potted cactus at the foot of the frame.
Free advice before you buy

Not sure it suits your room?

Tell us about the space and the ceiling height, and a person on the team will tell you how it will look and fit.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.