A 15 cm (5.9″) glass globe rides a slim brushed-brass stem that runs on past the wall plate, so the light sits high and the brass line carries on below it. The E26 LED bulb is included — nothing to buy before you switch it on. Made for bedsides, console tables, hallways and stairwells, in four glass tints.
What makes it work
-
Brushed brass throughout — wall plate, stem and the cone under the globe all carry the same warm, low-shine finish; there is no second metal on the fixture.
-
Four glass tints — smoke gray, amber, clear or milk white on identical hardware, so the choice is about the light rather than the shape.
-
Bulb already fitted — an E26 LED bulb comes with it at 5 W maximum, carrying three selectable light settings on the bulb itself.
Available finishes
All four share the same ∅ 15 cm (5.9″) globe, the same 60 cm (23.6″) stem and the same hardware — only the glass changes.
| Glass tint |
What you get |
| Smoke Gray |
Dark mirrored graphite unlit; a low, warm glow once it is on |
| Amber |
Honey-toned, and it warms everything around it |
| Clear |
Leaves the filament fully visible — the brightest and most graphic of the four |
| Milk White |
Solid and even, hiding the bulb altogether — the softest light of the set |
Before you drill
Two measurements decide it. Allow 60 cm (23.6″) of clear height: the plate sits near the middle of the stem, so the globe rises about as far above your fixing point as the tail drops below it. The round backplate is ∅ 10 cm (3.9″) — measure your junction box against that, and if the box is wider, a separate cover plate closes the gap for a clean edge.
The light it gives
The included E26 LED bulb carries three selectable light settings, and they are the only adjustment: the sconce is not dimmable and takes no smart controls. Draw is 5 W at most. There is no cord, plug or switch on the fixture, so it wires into the wall and runs from your wall switch. At IP20 it carries no moisture protection — dry indoor walls rather than a bathroom.
Fitting it
The plate screws to a standard wall box and wires into the mains at AC 110–240 V. At 2 kg (4.4 lb) the fixture is light enough for plasterboard with the right fixings. Have an electrician make the connection if you'd rather not touch the wiring, or fit it yourself if you're comfortable with basic household wiring — it's a straightforward job.
Specifications
| Materials |
Glass globe, brass-finished metal |
| Glass tints |
Smoke Gray, Amber, Clear, Milk White |
| Overall height |
60 cm (23.6″) |
| Globe diameter |
∅ 15 cm (5.9″) |
| Backplate diameter |
∅ 10 cm (3.9″) |
| Weight |
2 kg (4.4 lb) |
| Socket |
1 × E26 |
| Bulb |
LED, included, three selectable light settings |
| Maximum power |
5 W |
| Voltage |
AC 110–240 V |
| Power source |
Hardwired |
| Dimmable |
No |
| Smart control |
Not supported |
| IP rating |
IP20 — dry indoor walls only |
| Assembly |
Required |

Full measurements and a fitting guide are available on request — email us at info@clerachic.com and we will send them over.
Frequently asked questions
Does it come with a bulb?
Yes. An E26 LED bulb is fitted, and it carries three selectable light settings on the bulb itself, so there is nothing to source before you can use it.
How much wall does it need?
Allow 60 cm (23.6″) of clear height. The fixing point sits near the middle of the stem, so the globe rises about as far above it as the tail drops below, and the round backplate measures ∅ 10 cm (3.9″).
Can I dim it or run it from a smart system?
No. There is no dimming and no smart control. The three light settings built into the included bulb are the only adjustment.
Is it suitable for a bathroom?
No. It is rated IP20, which carries no moisture protection, so keep it to dry indoor walls.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.