• This Clérachic spot light has a round brass ceiling plate and a short brass cylinder tilted to one side, on a plain white background.
  • Three Clérachic brass spots in a row on the ceiling light a framed abstract painting on a grey wall with soft pools of light.
  • Brass Clérachic ceiling spots aimed at different angles wash a cream wall and a colourful framed print above a walnut sideboard.
  • A row of three Clérachic brass spots on a ceiling lights a sage-green wall with framed prints, above a low walnut cabinet.
  • Five Clérachic brass ceiling spots send scallops of light down a slatted walnut wall behind a green velvet sofa.
  • Three brass Clérachic spots on the ceiling angle towards three framed prints on a wood-panelled wall above a sideboard.
  • Along a hallway ceiling, brass Clérachic spots light a wall of small framed pictures, with one more spot at the far end.
  • Four brass Clérachic spots step down a white ceiling and wash a wall hung with three tall framed seascape prints.
  • Brass Clérachic spots on the ceiling light a white-painted brick wall with two framed prints and a walnut sideboard.
  • A line of brass Clérachic ceiling spots lights three black-framed pictures above a floating oak shelf in a white hallway.
  • Three Clérachic brass spots light the central panel of a walnut dressing room, with wardrobes and an island below.
  • Three Clérachic brass spots sit close together on the ceiling above a framed bamboo painting on a grey concrete-look wall.
  • Above a green Chesterfield sofa in a panelled room, three Clérachic brass spots light a landscape painting.
  • Brass Clérachic spots at three different angles hang over a marble kitchen island in a dark green kitchen.
  • In a book-lined study with a slatted wood wall, Clérachic brass spots light the panel above a desk and a green armchair.
  • A single Clérachic brass spot lights a framed botanical print on a navy wall, beside a table lamp and a cream armchair.
  • Three Clérachic brass spots light two paintings in a pale grey room, with a soft strip of light running along the floor.
  • Tilted slightly on its neck, this Clérachic brass spot has a glowing lens at the tip, on a plain lilac-grey surface.
  • Straight-down view of this Clérachic brass spot, a short cylinder under a round plate with a warm glow at the lens.
  • This Clérachic brass spot is angled to one side, showing a dark lens at the end of its smooth brushed cylinder.
  • Seen from the front, this Clérachic brass cylinder hangs straight down from its ceiling plate with a dark lens at the base.
  • Another straight-on view of this Clérachic spot, switched off, with a dark lens set into the brass cylinder.
  • With the light just coming on, this Clérachic brass spot shows a pale warm glow at the lens.
  • Lit against a warm beige ceiling, this Clérachic brass spot sends a bright white glow from the lens.
  • Low angle on this Clérachic brass spot, tilted to show the inside of the cylinder and its pale warm lens.
  • Close view of the round ceiling plate and the dark ring where this Clérachic brass cylinder meets it.
  • This Clérachic spot is tilted at a slant, with its brushed brass cylinder and a dark lens at the lower end.
  • From the side, this tilted Clérachic brass spot shows its slim cylinder and a faint glow in the lens.
  • Switched on, this tilted Clérachic brass spot throws a bright white light, against a beige ceiling.
  • Close view of the inside of this Clérachic brass cylinder, showing the textured lens and the rim around it.
  • Close view of the brushed brass finish along the length of this Clérachic spot, with a frosted lens at the base.
  • Close view of the round brass ceiling plate and the short neck that lets this Clérachic spot tilt.
2 sizes

Brass Spotlight, Adjustable Beam Angle, Ceiling Light, 8 cm

€130Incl. VAT & Free Shipping
Colour Brass
1

Arrives in France within Nov 30–Dec 7

Description

A spotlight in solid brass with a brushed finish, the body and the shade in the same metal. The head angle adjusts to aim a focused beam, and a GU10 LED bulb provides the light, with the bulb replaceable.

Choose the 8 cm (3.1″) or the 10 cm (3.9″) size. It is hardwired to the ceiling and gives accent light in contemporary interiors, aimed wherever you point it.

Shipping & delivery

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Size
Dimension drawing: Ø10 x H18.5 cm
The details

Everything you need to know before it arrives

A solid brass spotlight in brushed finish whose angle you can adjust to aim a focused beam, in 8 cm or 10 cm diameter.

Installation guide

Downlights install into or onto a ceiling and wire directly to a ceiling junction. Which of those it is changes the job completely, so confirm the mounting format in the Product Specifications above before you cut anything - a cutout is not reversible.

Before you start

  • Mounting format: recessed, semi-recessed, surface-mounted, trimless or track-mounted. The specification above states which your model is.
  • Ceiling type: most models suit plasterboard. Concrete and suspended ceilings need different fixings and, for concrete, a core drill.
  • Cavity depth: a recessed fitting needs clear depth above the ceiling for the body and the driver. Check the depth listed above against what you actually have, including any insulation.
  • Power: all models are hardwired to a ceiling junction.
  • Dimming: many are dimmable with a compatible driver and wall dimmer. The driver and the dimmer both have to suit the fitting.
  • Trimless: a trimless fitting is finished into the plaster and is a wet-trade job. Plan it before the ceiling is decorated.

Tools you may need

  • Drill
  • Hole cutter or drywall saw, for recessed and trimless fittings
  • Screwdriver
  • Voltage tester
  • Wire strippers
  • Wire nuts or terminal connectors
  • Screws and anchors, for surface mounting
  • Spirit level
  • Tape measure and pencil

Installation

1. Switch off the power

Turn the circuit off at the consumer unit or breaker panel and test at the junction with a voltage tester before starting.

2. Mark and cut the opening

For recessed and trimless fittings only. Use the template supplied to mark the cutout and check for joists, pipes and cables above the line before you cut. Cut slowly with a hole cutter or drywall saw. A trimless fitting needs more depth and more preparation than a standard recessed one.

3. Fit the housing or mounting hardware

  • Recessed and trimless: push the housing up into the cavity and let the spring clips take it against the plasterboard. Trimless bodies may need framing between joists to hold the line.
  • Semi-recessed: part of the body sits below the ceiling; fix it as the supplied instructions describe.
  • Surface-mounted: fix straight to the ceiling or to an existing junction box with screws and anchors.
  • Track-mounted: install the track first, then lock the fitting onto the rail.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Secure each connection and place the wiring and driver back into the cavity clear of the fitting body, where the heat is.

5. Finish

Recessed, semi-recessed and surface fittings finish by twisting or clipping the trim or body into place. Trimless fittings are filled, feathered and painted into the ceiling plane. Track heads are aimed after they lock onto the rail.

6. Restore power and test

Switch the circuit back on and test from the wall switch or dimmer. Aim adjustable heads once the room is lit and you can see where the light falls.

Important tips

  • Have trimless and recessed downlights installed professionally where plastering or insulation is involved.
  • Follow the wiring rules that apply where you live.
  • Use only the driver and dimmer specified for the fitting - a mismatched pair is the usual cause of flicker and of early driver failure.
  • Keep insulation clear of the fitting body unless it is rated for direct cover. Trapped heat shortens LED life quickly.
  • Plan the spacing before you cut. Downlights set about a metre apart light a room evenly; set them by eye and the gaps will show at night.

If anything about the cutout, the depth or the driver is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions, 8 x 17 cm
∅8 cm × H 17 cm (3.1″ × H 6.7″)
Dimensions, 10 x 19 cm
∅10 cm × H 19 cm (3.9″ × H 7.5″)
Material
Brass
Light source
LED bulb
Bulb base
GU10
Voltage
AC 110–240 V
Control
Works with a standard wall switch (not included), connected to an external wall light switch for a controlled power supply
Mounting
Ceiling
Wiring
Hardwired
Finish
Brass
In the room

See it in the room

Three brass Clérachic spots on the ceiling angle towards three framed prints on a wood-panelled wall above a sideboard.
Along a hallway ceiling, brass Clérachic spots light a wall of small framed pictures, with one more spot at the far end.
Brass Clérachic spots on the ceiling light a white-painted brick wall with two framed prints and a walnut sideboard.
Close view of the round brass ceiling plate and the short neck that lets this Clérachic spot tilt.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Brushed brass finish, body and shade in solid brass
  • Adjustable angle for precise beam direction
  • Two sizes: 8 cm or 10 cm across, 17 cm or 18.5 cm tall
  • Hardwired ceiling mount, switched from a standard wall switch
Complete the room

You might also like...

FAQ

Questions, answered

What sizes does this light come in?

Two sizes: ∅ 8 cm (3.1″) × H 17 cm (6.7″) (small) and ∅ 10 cm (3.9″) × H 19 cm (7.3″) (large). The spotlight angle is adjustable for precise beam direction.

What light source does it use?

LED or Edison bulb with GU10 base. Both are replaceable. The fixture operates on AC 110–240 V and connects to a standard wall switch.

How is this light installed?

It is hardwired to ceiling and connects to an external wall switch (not included). Installation guides and 3D files are available for download from our product page.

What finish does it come in?

Brushed brass. The body and shade are both solid brass, creating a cohesive, contemporary look that works in residential and commercial interiors.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Three Clérachic brass spots in a row on the ceiling light a framed abstract painting on a grey wall with soft pools of light.
Free advice before you buy

Not sure which size suits your room?

Tell us about the space, the chair it will stand beside or the ceiling height, and a person on the team will suggest a size and finish.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.