• Two Clérachic brass wall sconces on a blush wall above a walnut desk with a leather notebook, a mug and tall shelves.
  • Conical brass-toned wall sconce on a short swing arm and round backplate, on a plain white backdrop, from Clérachic.
  • Two Clérachic brass-toned wall sconces flank an oval brass mirror above a black marble vanity, against a deep green wall.
  • A Clérachic brass wall sconce on each side of a bed with a boucle headboard and linen bedding, on a warm plaster wall.
  • Three Clérachic conical wall sconces light open shelves and a marble worktop in a kitchen with cream tiled walls.
  • A row of three Clérachic brass wall sconces beside framed monochrome artworks in a plaster-walled hallway.
  • Clérachic brass wall sconce lit above a tan leather armchair with a cream throw, beside a black freestanding fireplace.
  • Close, angled view of a Clérachic brass conical wall sconce on a soft pink wall, with its round backplate and short arm.
  • This Clérachic wall sconce, seen from the side on a pink wall, shows its aged brass cone shade and round backplate.
  • Front view of a lit Clérachic wall sconce, its cone shade throwing a pool of warm light down a pale pink wall.
  • Unlit Clérachic conical wall sconce seen from the front, with its swing arm folded in front of the round backplate.
  • Clérachic wall sconce lit, with its arm extended and the warm bulb glowing under the cone shade on a pink wall.
  • Unlit Clérachic wall sconce with its arm extended to the side, the round backplate on the left, on a pale pink wall.
  • Unlit Clérachic wall sconce with the backplate to the right and the cone shade tilted forward, on a soft pink wall.
  • Lit Clérachic wall sconce with its arm swung out, the bulb glowing inside the brass cone shade, against a pink wall.

Conical Brass Wall Light, Bronze Finish, Wall Sconce, 35 cm

€268Incl. VAT & Free Shipping

Size20 × 35 cm

FinishesBronze

1

Arrives in France within Dec 1–8

Description

A wall sconce in bronze-finished brass, with a conical shade on a round backplate and a clean vintage line. The cone gives focused light, which suits accent lighting. It takes an E26 or E27 bulb, which is not included in the box.

It comes in one size, 20 cm (7.9″) wide and 35 cm (13.8″) tall, in one bronze finish. It suits bedsides, living rooms and vanities.

Shipping & delivery

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 1 December and 8 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Size
Dimension drawing of this Clérachic wall light, 20 x 35 cm, L20 x H35 cm.
The details

Everything you need to know before it arrives

A conical bronze brass shade, 20 cm wide and 35 cm tall, sits on a round backplate for a clean vintage look, with focused light for bedsides and vanities.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions
20 cm × 35 cm (7.9″ × 13.8″)
Material
Brass
Type
Wall lamp
Environment
Indoor
Body colour
Bronze
Shade colour
Bronze
Clérachic brass wall sconce lit above a tan leather armchair with a cream throw, beside a black freestanding fireplace.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Conical brass shade — focused light for bedsides and vanities
  • Bronze finish on shade and body — a deep, vintage tone
  • Round backplate — a tidy, clean-lined mount to the wall
  • 20 × 35 cm — suits a bedside, living room or vanity
Complete the room

You might also like...

FAQ

Questions, answered

What are the exact dimensions of this sconce?

This sconce measures 20 cm x 35 cm (7.9″ long by 13.8″ high).

What materials and finish does this wall sconce have?

This sconce is made of brass with a bronze finish on both the body and shade.

What style is this sconce?

This sconce has a vintage, industrial, and traditional style with a conical shade and round backplate offering a clean vintage look.

Which rooms is this wall sconce suitable for?

This sconce works in bedrooms and bedside areas, living rooms, dining rooms, and bathrooms or vanities as focused light or accent lighting.

What type of bulb does this sconce use, and is one included?

It takes an E26 or E27 base bulb with a maximum of 40 W; no bulb is included.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Two Clérachic brass-toned wall sconces flank an oval brass mirror above a black marble vanity, against a deep green wall.
Free advice before you buy

Not sure it suits your room?

Tell us about the space and the ceiling height, and a person on the team will tell you how it will look and fit.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.