• A black Clérachic wall light with a twisting ribbon of matte metal and a lit LED strip, mounted upright on a white wall beside a mirror.
  • A gold Clérachic wall light shaped like a twisting ribbon, mounted upright on a white wall beside a tall mirror edge, its LED glowing.
  • A nickel-finish Clérachic wall light with a twisting ribbon of brushed metal, mounted upright on a white wall beside a tall mirror edge.
  • A black Clérachic ribbon wall light on a white wall in a bright corner, above a grey armchair, a small black side table and a leafy plant.
  • This Clérachic wall light lying on its side on white, its nickel-finish metal ribbon curving over a round back plate with the LED lit beneath.
  • Upright view of this gold Clérachic wall light on white, the brushed metal ribbon twisting around its round back plate with the LED lit.
  • Close view of the gold metal ribbon on this Clérachic wall light, with a thin white LED strip running along the inside of the curve.
  • Close view of the round gold back plate on this Clérachic wall light, the twisting ribbon passing over a warm glowing LED strip.
  • Close view of the black textured ribbon on this Clérachic wall light, curving over its back plate with a bright LED strip along the inner edge.
  • Close view of a black ribbon curve on this Clérachic wall light, the matte surface sloping down beside a pale LED strip.
  • Close view of the brushed nickel ribbon on this Clérachic wall light, curving past the round back plate with the LED strip lit underneath.
  • Close view of the round nickel back plate on this Clérachic wall light, with the brushed ribbon rising over it and the LED glowing white.

Dimmable LED Wall Light, Wall Sconce, 60 cm Bar, 6000 K Cool White

€113Incl. VAT & Free Shipping
Colour Black
1

Arrives in France within Dec 1–8

Description

A slim 60 cm (23.6″) metal bar with built-in LED light in cool white, 6000 K. The clean, sleek line suits modern or transitional interiors, and the LED means there are no bulbs to replace.

You choose gold, black or nickel. The bar is dimmable and hardwired, and sits on a 12 cm (4.7″) canopy, so it works above a bathroom vanity.

Shipping & delivery

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 1 December and 8 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Dimension drawing: 60 cm bar, round plate 12 cm
The details

Everything you need to know before it arrives

A slim 60 cm metal bar carries built-in LED light in cool white, finished in gold, black or nickel, for a clear light through your bathroom routine.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions
W 60 cm (23.6″)
Material
Metal
Light source
Integrated LED
Total wattage
12 W
Average life
45000 hours
Voltage
120/220 V
Dimmable
Yes
Power source
Hardwired
Sloped ceiling
Not compatible
Assembly required
Yes
Show more
Location rating
Dry
Finish
Black, nickel or gold
Canopy width
12 cm (4.7″)
Close view of the round nickel back plate on this Clérachic wall light, with the brushed ribbon rising over it and the LED glowing white.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • 6000 K cool white light, clear and bright for the bathroom routine
  • Dimmable integrated LED, 12 W, rated for 45000 hours
  • 60 cm bar on a 12 cm canopy, one clean sleek line
  • Gold, black or nickel finish for modern or transitional spaces
Complete the room

You might also like...

FAQ

Questions, answered

How long is this light bar?

It is 60 cm (23.6″) wide.

Do I need to buy bulbs?

No. The LED is integrated and uses 12 W in total.

Can I dim it?

Yes, the light is dimmable.

How long does the LED last?

The average life is 45,000 hours.

What finishes does it come in?

You can choose black, nickel or gold. The body is metal.

How is it powered?

It is hardwired and suits 120/220 V. Assembly is required.

Can I fit it to a sloped ceiling?

No, it is not compatible with sloped ceilings. The canopy is 12 cm (4.7″) wide.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

A gold Clérachic wall light shaped like a twisting ribbon, mounted upright on a white wall beside a tall mirror edge, its LED glowing.
Free advice before you buy

Not sure it suits your room?

Tell us about the space and the ceiling height, and a person on the team will tell you how it will look and fit.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.