Drawing on post-modern architecture, where graphic line becomes space, this linear pendant defines a room with clean, confident geometry. Its cylindrical form reads as an architectural element in its own right, scaling over a dining table or down a hallway to anchor the space below.
Cylindrical sections let the fixture be configured as an architectural element — graphic line turned into structure.
Features
-
Architectural linear form — a clean cylindrical bar that defines space with a minimal, graphic presence.
-
Three lengths — 39.4", 47.2", or 59", so you can match the fixture to your table or hallway.
-
Integrated LED — built-in light source in three colour temperatures, with no bulb to source or swap.
0-10V dimmable version — driver installation requirement
For the 0-10V dimmable warm light version, the driver must be installed inside the ceiling. If your ceiling can't house the driver, a long base plate extension (900 × 120 × 40 mm) is required instead. Please confirm your installation setup before ordering this version.
Triac dimmer version — simpler alternative
If you'd rather dim without the ceiling driver requirement, choose the Triac dimmer version at checkout and pair it with a Triac dimmer switch. A compatible Triac (thyristor) dimmer switch is needed for this version.
Colour temperature — default Warm White (3000K)
All standard orders ship in Warm White (3000K). If you need Neutral White (4000K) or Cool White (6000K), contact our team before ordering.
-
3000K — warm, cozy ambiance.
-
4000K — balanced neutral white.
-
6000K — crisp, bright cool white.
Integrated LED — long life and ongoing light-source support
The integrated LED is built to last, with a long service life under normal use. For added peace of mind, we offer an ongoing light-source support service: should the LED ever fail, we can always supply a compatible replacement so your fixture keeps working for years. Any questions, reach our team at info@clerachic.com.
Available sizes
Canopy: ∅5.1" × H1.6" (13 × 4 cm). Rods: 7.9" + 19.7" (20 + 50 cm) standard, extendable on request.
| Length × Height |
Power |
| L39.4" × H35" (100 × 89 cm) |
48W |
| L47.2" × H35" (120 × 89 cm) |
56W |
| L59" × H35" (150 × 89 cm) |
72W |


Specifications
| Materials |
Metal · acrylic |
| Light source |
Integrated LED |
| Colour temperature |
Default 3000K Warm White — 4000K / 6000K available, contact us before ordering |
| Voltage |
AC 110–240V |
| Dimming |
0-10V dimmable: driver requires ceiling installation (if not possible, 900×120×40 mm base plate required) · Triac dimmable: standard Triac dimmer switch |
| Suspension rods |
2 rods: 7.9" + 19.7" (20 + 50 cm) standard · extendable on request |
| Control |
Standard wall switch (not included) |
| Wiring |
Hardwired |
| Mounting |
Ceiling |
| IP rating |
IP20 · indoor use only · not waterproof |
| Certification |
North America · EU · AU · Saudi Arabia |
| Finishes |
Gold · Black · shade in white acrylic |
Spec sheet and installation guide available on request.
Installation notes
- Hardwired ceiling installation — a licensed electrician is strongly recommended for this architectural fixture.
- 0-10V dimmable version: the driver must go in the ceiling. If that's not possible, a 900×120×40 mm base plate extension is required — contact us to arrange before ordering.
- Triac dimmable version: a standard Triac dimmer switch is required; no ceiling driver installation needed.
- Suspension rods: 7.9" + 19.7" standard, with custom extensions available on request.
- For indoor use only — not suitable for bathrooms or damp locations.
Frequently asked questions
What is the 0-10V dimmable driver requirement?
For the 0-10V dimmable version, the driver must be installed in the ceiling. If that isn't possible, a 900×120×40 mm base plate extension is required. Confirm your setup before ordering.
Can I use a Triac dimmer instead?
Yes. Choose the Triac dimmable version at checkout; it needs only a Triac dimmer switch, with no ceiling driver or base plate extension.
What lengths are available?
Three: L39.4" (48W), L47.2" (56W), and L59" (72W), all H35" tall.
Can the suspension rods be extended?
Yes. Two rods (7.9" + 19.7") are included by default, with custom lengths available on request.
Every order ships free with no minimum, and you have 30 days to return it. Questions? Reach our team at info@clerachic.com.