A ∅24 cm (9.4″) matte cone with a warm-white LED ring set flush into the rim — a lit line, not a bare bulb. The 39 W LED is integrated: nothing to buy, nothing to replace, and 121 cm (47.5″) of adjustable flex sets the drop. Six colours, for a dining table, kitchen island or bedside.
What makes it work
-
Acrylic diffuser ring — a continuous band of warm white set flush in the rim, so there is no bare lamp at eye level and no hot spot on the table.
-
Six matched colourways — black, white, yellow, blue, pink and gray, each with the flex and ceiling canopy finished to match, so the drop reads as one line.
-
Matte opaque shell — holds exactly the same colour lit or unlit, and throws the light down where you want it rather than back at the ceiling.
-
121 cm (47.5″) of adjustable flex — enough drop for a high ceiling, and it shortens at the ceiling end for a low island or a bedside.
What to know before you order
The light is directional. The shell is opaque, so nearly everything the LED makes goes down through the ring — very good over a worktop, a table or a bedside book, and not the fixture to light a whole room from one point. Reckon on one pendant to every 5–10 m² (54–108 ft²) of floor, or run two or three in a line above an island. It is not dimmable and runs at full output on a plain on/off circuit. IP20 carries no moisture protection: dry indoor rooms only, not a bathroom and not a covered porch.
Colour temperature
The ring runs one warm white throughout: the tone that keeps a dining table, a bedside or a living room comfortable to sit under, rather than the crisp, cool light you would pick for a workshop or a desk.
Measurements

∅24 cm (9.4″) across the mouth · 19 cm (7.5″) tall · 121 cm (47.5″) of flex.
Fitting it
The shade, flex and canopy arrive as one assembly, so the work is a single ceiling connection and setting the drop — over a table or an island the rim usually sits 75–90 cm (30–35″) above the surface. Fix the canopy to a joist or a rated ceiling box rather than to plasterboard alone. It runs on AC 110–240 V, which covers standard mains supply in most regions. Have an electrician make the connection if you'd rather not touch the wiring, or fit it yourself if you're comfortable with basic ceiling wiring — it's a straightforward job.
Specifications
| Shade |
∅24 cm (9.4″) × 19 cm (7.5″) high |
| Cord drop |
121 cm (47.5″), adjustable |
| Light heads |
1 |
| Materials |
Metal fixture, acrylic shade |
| Light source |
Integrated LED, 39 W — no bulb required |
| Colour temperature |
Warm white |
| Colours |
Black, white, yellow, blue, pink, gray |
| Voltage |
AC 110–240 V |
| Dimmable |
No |
| Mounting |
Ceiling — hardwired |
| IP rating |
IP20 — dry indoor use only |
| Suggested coverage |
5–10 m² (54–108 ft²) per pendant |
| In the box |
1 × pendant light |
Spec sheet and installation notes are available on request — write to info@clerachic.com and we’ll send them over.
Frequently asked questions
How wide is it, and how far does it hang?
The cone is ∅24 cm (9.4″) across and 19 cm (7.5″) tall, on 121 cm (47.5″) of flex you can shorten to any drop.
Is there a bulb to fit?
None. A 39 W LED is built into the rim behind the acrylic diffuser ring, so the fixture lights as soon as it is wired in.
Can I dim it?
No. It runs at full output on a plain on/off circuit.
Can it go in a bathroom or on a covered porch?
No. It is rated IP20, which carries no moisture protection, so keep it to dry indoor rooms.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.