• A red-brown leather cone pendant from Clérachic hangs close to a white painted brick wall, a framed canvas at its side.
  • A red-brown stitched leather cone pendant from Clérachic with a brass cap and twisted cord, on a plain white backdrop.
  • Three Clérachic leather cone pendants hung in a row above a pale wooden table, with cream chairs and a plaster wall behind.
  • An olive-green leather cone pendant from Clérachic glowing warm beside open wooden shelves of books and ceramics.
  • Olive-green leather cone shade on this Clérachic pendant, lit with a filament bulb in front of a limewashed wall and dried stems.
  • Unlit, this Clérachic pendant shows an olive-green cone shade with a clear bulb against a softly cracked plaster wall.
  • Red-brown stitched cone shade on this Clérachic pendant, its pale inner lining glowing against a warm beige wall.
  • Seen from slightly below, this Clérachic pendant has a red-brown leather shade, with window light falling across a plain wall.
  • Three red-brown leather pendants from Clérachic step down in height over a long timber table lined with cream dining chairs.
  • A lit olive-green leather cone pendant from Clérachic hangs against a smooth cream wall, its brass cap catching the light.
  • Beside a framed canvas on white brick, this Clérachic pendant shows a red-brown leather cone with a glowing gold lining.
  • Soft window light patterns fall across the wall behind this red-brown leather cone pendant from Clérachic.
  • An olive-green leather pendant from Clérachic hangs next to a framed sketch, its warm bulb lighting the inside of the cone.
  • Lit olive-green leather cone from Clérachic against whitewashed brick, with the riveted seam running down one side.
  • This Clérachic olive-green cone pendant hangs in front of a framed abstract line print, bulb glowing under the shade.
  • Close view of the red-brown leather cone on this Clérachic pendant, with a seam of brass rivets and a lit filament bulb.
  • The same Clérachic cone pendant in red-brown leather, unlit, showing a clear bulb and a pale lining against white brick.
  • Large view of the olive-green leather shade on this Clérachic pendant, with rivets along the seam and a teardrop-shaped bulb.
  • Glowing warm, this olive-green leather pendant from Clérachic hangs against painted brick with its rivet seam in full view.
  • A red-brown leather cone pendant from Clérachic seen in soft daylight, with shadows from a window on the white wall.
  • From a lower angle, this Clérachic olive-green leather shade shows its row of brass rivets against a pale brick wall.
  • Olive-green leather cone pendant from Clérachic in a warm sand-coloured room, with a single dried stem below the shade.
  • The shade of this Clérachic pendant seen from beneath, in red-brown leather with a neat line of brass rivets on the seam.
  • Close view of the brass rivets and white stitching on the red-brown leather of this Clérachic pendant.
  • A red-brown leather pendant from Clérachic, lit softly, in front of a white wall marked by diagonal window light.
  • Olive-green leather cone pendant from Clérachic with a clear bulb showing under the rim, against a bright wall with light patches.
3 sizes

Leather Pendant Light, Hand-Stitched Cone Shade, Brass Rivets

€187Incl. VAT & Free Shipping
1

Arrives in France within Dec 2–9

Description

A pendant with a hand-stitched natural leather shade in a gentle cone, finished with brass rivets at the seams and a gold metal cap. The leather can deepen into a patina over the years, so each shade is its own. It takes one E26 or E27 bulb of up to 40 W, supplied separately.

Choose from three sizes and two leather colours, Retro Red or Retro Brown. Hang one over a dining area or kitchen island, or group several at different heights. It is hardwired and made for indoor use.

Shipping & delivery

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 1 December and 8 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Size
Dimension drawing of this Clérachic pendant light, 25 x 12 cm, Ø25 x H12 cm.
The details

Everything you need to know before it arrives

A hand-stitched leather shade in a gentle cone, finished with brass rivets and a gold metal cap, hanging on a 150 cm cord in three sizes.

Installation guide

This fitting hangs from a ceiling outlet box and is wired into your mains supply. Work out your hanging height before you connect anything - it is far easier to set the drop with the wiring still loose than to redo it afterwards.

Before you start

  • Mounting: the fitting secures to a standard ceiling outlet box. The bracket and fixings are in the box.
  • Weight: check that your outlet box and ceiling can carry the fitting. Weights are listed in the Product Specifications above. A heavy chandelier may need a brace fitted between the joists.
  • Hanging height: the supplied cord, chain or rod can be shortened. Over a dining table, a drop that leaves roughly 75 to 90 cm between the table top and the bottom of the shade suits most rooms.
  • Ceiling type: every model suits a flat ceiling. Sloped-ceiling compatibility is stated per product in the Product Specifications above.
  • Power: these fittings are hardwired. They do not plug into a socket.
  • Dimming: models with a replaceable bulb can usually be dimmed with a compatible dimmer. Integrated LED models generally cannot.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire strippers
  • Wire nuts or terminal connectors (supplied)
  • Step ladder, and a second person for anything heavy or wide
  • Drill, if you are fitting a new outlet box or bracing the ceiling

Installation

1. Switch off the power

Turn the lighting circuit off at the consumer unit or breaker panel - the wall switch is not enough. Test at the ceiling outlet with a voltage tester and confirm the wires are dead.

2. Fit the mounting bracket

Screw the supplied bracket to the ceiling outlet box with the screws provided. Tighten evenly and check that it sits flat and square; a bracket that is not level will show in the finished hang.

3. Set the hanging height

Adjust the cord, chain or rod to the drop you want before you make any electrical connection. Lock the length using the canopy adjuster or the grip inside the canopy. Where a cord is shortened, coil the surplus neatly inside the canopy rather than cutting it - that keeps the height adjustable later.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Secure each connection with a connector and press the wiring gently up into the box. Nothing should be trapped between the canopy and the ceiling when you close it.

5. Fix the fitting to the bracket

Lift the canopy or backplate onto the bracket and fasten it with the screws or decorative caps supplied. Work up to a firm fit rather than forcing it - decorative caps and plated threads strip easily.

6. Fit the bulbs

Fit the bulb type and wattage listed in the Product Specifications above. Where several sockets share one shade, use identical bulbs so the colour and brightness match across the fitting.

7. Restore power and test

Switch the circuit back on and test the light, including the dimmer if you have fitted one. Isolate the power again before re-opening anything.

Important tips

  • Follow the wiring rules that apply where you live, and use a qualified electrician for high ceilings, sloped mounts or anything you are unsure of.
  • Have someone hold a wide or heavy fitting while you make the connections. Do not let it hang on its wiring at any point.
  • Clean glass and crystal with a dry, soft cloth. Do not spray cleaner onto a fitting that is wired in.
  • Do not over-tighten decorative parts: they are finished, not structural.

If anything about the fitting, the drop or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions, 25 x 12 cm
25 cm × 12 cm (9.8″ × 4.7″)
Dimensions, 30 x 16 cm
30 cm × 16 cm (11.8″ × 6.3″)
Dimensions, 35 x 20 cm
35 cm × 20 cm (13.8″ × 7.9″)
Material
Hand-stitched natural leather shade, gold metal cap, brass rivet details
Type
Pendant light
Style
Vintage industrial
Bulb base
E26 / E27, bulbs not included
Sockets
1
Maximum power
40 W
Recommended bulb
Edison filament, for a vintage look
Show more
Voltage
AC 110–240 V
Wiring
Hardwired, licensed electrician recommended
Environment
Indoor only
IP rating
IP20, indoor dry locations only (not damp-rated)
Body colour
Gold (metal cap)
Shade colour
Retro Red, Retro Brown
Best for
Medium
Leather shade
Natural leather is hand-stitched, so colour tone, grain pattern and stitching vary from piece to piece. The leather may also develop a patina over the years, deepening in character with age and use. Your shade will share the photos' overall vintage industrial feel, but every piece is unique
In the room

See it in the room

Three red-brown leather pendants from Clérachic step down in height over a long timber table lined with cream dining chairs.
Soft window light patterns fall across the wall behind this red-brown leather cone pendant from Clérachic.
A red-brown leather cone pendant from Clérachic seen in soft daylight, with shadows from a window on the white wall.
Close view of the brass rivets and white stitching on the red-brown leather of this Clérachic pendant.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Hand-stitched natural leather shade in Retro Red or Retro Brown
  • Brass rivets and a gold metal cap give it a vintage industrial edge
  • Three sizes, 25 cm to 35 cm across, so you can hang one or a cluster
  • Leather deepens into a patina with age, so each shade is one of a kind
Complete the room

You might also like...

FAQ

Questions, answered

What's the difference between Retro Red and Retro Brown?

Both share the same hand-stitched leather shade, brass rivets and gold metal cap, and only the leather tone differs. Retro Red is the bolder, warmer choice, while Retro Brown is the deeper, more classic tone that suits most interiors.

How should I choose between the 3 sizes?

The 25 cm (9.8″) size suits a kitchen prep area, a powder room or a cluster of 3 or more. The 30 cm (11.8″) size suits a single pendant over a small dining table, breakfast nook or entryway, and the 35 cm (13.8″) size works over a dining table or kitchen island or as the anchor of a mixed-size cluster.

What kind of bulb should I use?

No bulb is included. The pendant takes one E26 or E27 bulb, maximum 40 W, and a clear Edison-style filament bulb gives the most authentic vintage look.

Will my leather look exactly like the photo?

Very close, but every shade is unique. Natural leather varies in colour tone and grain, the hand-stitching differs slightly from piece to piece, and the leather may develop a patina over the years.

How is it installed, and can I cluster several?

The pendant is hardwired with an adjustable 150 cm (59″) cord, and we recommend a licensed electrician. For a cluster, ask your electrician how to feed several pendants from your ceiling box.

What are the dimensions of this pendant?

There are three sizes: 25 cm × 12 cm (9.8″ × 4.7″), 30 cm × 16 cm (11.8″ × 6.3″) and 35 cm × 20 cm (13.8″ × 7.9″), measured as diameter × height.

What materials is this pendant made from?

It has a hand-stitched natural leather shade, a gold metal cap and brass rivet details. The shade comes in Retro Red or Retro Brown.

Which rooms is this pendant suitable for?

It suits bedrooms, dining rooms and commercial spaces such as restaurants and hotels. It is for indoor use only and is not damp-rated.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Olive-green leather cone shade on this Clérachic pendant, lit with a filament bulb in front of a limewashed wall and dried stems.
Free advice before you buy

Not sure which size suits your room?

Tell us about the space, the chair it will stand beside or the ceiling height, and a person on the team will suggest a size and finish.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.