An alabaster ring lit from within, carried on three riveted leather belts instead of a chain. The LED is integrated, so there is no bulb to buy and nothing to replace. Sized for a dining table, a kitchen island or an entrance hall, in three spans, ∅ 60–90 cm (23.6–35.4″).
What makes it work
-
Integrated LED behind stone — the light source is built in and concealed, so the ring glows evenly with no diode array showing through the alabaster.
-
Alabaster that turns with the switch — off-white clouded in grey and honey unlit; amber with pale gold striations lit.
-
Riveted leather suspension — flat, edge-painted, double-stitched belts cradle the ring instead of bolting through it, closed with paired brass screws.
-
Drop set in your room — each belt carries a punched hole row and a keeper loop, so the hanging height is decided at installation, not at the factory.
Light tone — choose at checkout
-
Warm Light: amber-leaning and relaxed, the tone to pick over a dining table or in a bedroom.
-
Cool Light: crisper and brighter, better over a kitchen island or a work surface.
Available sizes
| Ring diameter |
Section height |
Leather drop |
Best over |
| ∅ 60 cm (23.6″) |
10 cm (3.9″) |
200 cm (78.7″) |
A round four-seat table |
| ∅ 80 cm (31.5″) |
10 cm (3.9″) |
200 cm (78.7″) |
A long dining table or a seating group |
| ∅ 90 cm (35.4″) |
10 cm (3.9″) |
200 cm (78.7″) |
Rooms with a high ceiling |

Three ceiling points, not one
Each belt has its own brass canopy, so this takes three fixings, spaced to match the ring and marked off the ring itself before you drill. Put each one into a joist or a rated brace rather than plasterboard alone — a stone ring of this span is real weight. Over a dining table the base of a fixture usually sits 75–90 cm (30–35″) above the tabletop, so shorten the belts at the punched hole row to land it there. Wire it to a plain switched circuit; it is not made for a standard wall dimmer. Have an electrician make the connection if you'd rather not touch the wiring, or fit it yourself if you're comfortable with basic ceiling wiring — it's a straightforward job.
Good to know
Each fixture is one ring; the interlocking clusters you see styled in rooms are several of them hung together at staggered drops. Brown and Dark brown are the belts — tan cognac and dark chocolate — while the stone stays off-white to cream with honey veining in every size. Alabaster is quarried, so veining, translucency and tone shift from piece to piece.
Specifications
| Materials |
Natural alabaster · leather · brass |
| Ring diameter |
60 cm (23.6″) · 80 cm (31.5″) · 90 cm (35.4″) |
| Ring section height |
10 cm (3.9″) |
| Leather drop |
200 cm (78.7″), shortened at installation |
| Leather colour |
Brown · Dark brown |
| Light source |
Integrated LED |
| Light tone |
Warm Light · Cool Light, selected at checkout |
| Ceiling fixings |
Three, one per canopy |
| Voltage |
AC 110–240 V |
| IP rating |
IP20 — indoor, dry locations only |
| Wiring |
Hardwired |

Spec sheet and installation guide available on request — email info@clerachic.com and we'll send them over.
Frequently asked questions
How many ceiling fixings does it need?
Three, one for each brass canopy, spaced to match the ring diameter.
Can I run it on a dimmer switch?
No. The integrated LED runs at a set output and is not made for a standard wall dimmer.
Is the alabaster brown?
No — the stone is off-white to cream with honey veining. Brown and Dark brown are the leather belts.
Can it go in a bathroom?
No. It is rated IP20, which carries no moisture protection, so keep it to dry rooms.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.