A square metal plate sits flat to the wall and a riveted leather strap drops from it, carrying a round alabaster disc 14 cm (5.5″) across. The whole fixture stands just 8 cm (3.1″) off the wall, so it clears a headboard, a door architrave or a narrow hallway without anyone catching a shoulder on it. Lit, the alabaster turns a warm milky white with no bulb visible behind it; unlit, it reads as pale matte stone against tanned leather. Take the short 33 cm (13″) strap for a tight point of light beside a bed, the long 68 cm (26.7″) strap for a taller wall, or the two-head version, which keeps the same frame and adds a second disc.
What makes it work
-
8 cm (3.1″) of projection — it sits close enough to the wall for a corridor or a bedside, where a swing-arm or a bowl uplighter would be in the way.
-
Alabaster disc head — solid stone over the LED, so the light arrives as a soft even wash rather than a bright point.
-
Leather and hardware matched — a riveted strap in cognac brown, black or white, with the wall plate and rivets in brass, black or brushed nickel to suit.
Which size to order
All three share the same 14 cm (5.5″) width and the same 8 cm (3.1″) projection; only the strap changes. The short one-head measures 33 cm (13″) top to bottom and works in a pair beside a bed or in a run along a corridor. The long one-head drops 68 cm (26.7″) and carries better on a tall wall or next to a mirror. The two-head keeps that same 68 cm (26.7″) frame and adds a second alabaster disc, so you get two points of light in an identical footprint.
Before you order
- The LED is integrated. There is no bulb to fit and none to replace, and the fixture is not dimmable — it runs at the output you choose, Warm Light or Cool Light, and will not respond to a wall dimmer.
- Rated IP20 — indoor rooms only, with no protection against moisture, so it is not one for a bathroom or a covered porch.
- It is hardwired to a wall point rather than plugged in, so no cable or switch shows below it. Have an electrician make the connection if you'd rather not touch the wiring, or fit it yourself if you're comfortable with basic wall wiring — it's a straightforward job.
Available sizes
| Size |
Width |
Projection |
Height |
| 1 head, short |
14 cm (5.5″) |
8 cm (3.1″) |
33 cm (13″) |
| 1 head, long |
14 cm (5.5″) |
8 cm (3.1″) |
68 cm (26.7″) |
| 2 heads |
14 cm (5.5″) |
8 cm (3.1″) |
68 cm (26.7″) |
Specifications
| Materials |
Leather strap, alabaster disc, metal wall plate |
| Light source |
Integrated LED, no replaceable bulb |
| Light settings |
Warm Light or Cool Light, fixed output |
| Leather finishes |
Cognac brown, black, white |
| Hardware |
Brass, black or brushed nickel plate and rivets |
| Voltage |
AC 110-240 V |
| Wiring |
Hardwired, wall-mounted |
| IP rating |
IP20 — indoor use only, no moisture protection |
Full measurements and an installation guide are available on request — email info@clerachic.com and someone at Clérachic will send them straight over.
Frequently asked questions
Can I put it on a dimmer?
No. The LED is integrated and runs at a fixed output, so a wall dimmer will not control it. Choose Warm Light or Cool Light when you order.
How far does it stand off the wall?
8 cm (3.1″), on all three sizes, and 14 cm (5.5″) wide — close enough to sit beside a door or a headboard.
What does the two-head version add?
A second alabaster disc on the same 68 cm (26.7″) strap: same width, same projection, two points of light instead of one.
Can it go in a bathroom?
No. It is IP20 with no moisture protection, so keep it to dry indoor rooms.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.