• A single-rod Clérachic linear pendant glows above a stone dining table with six beige chairs, with shelving behind.
  • This Clérachic linear pendant light on a white backdrop, a gold metal bar with a looping white silicone light strip below.
  • A single-rod Clérachic linear pendant hangs above a round pedestal dining table in a neutral open-plan room.
  • A double-rod Clérachic linear pendant hangs above a marble kitchen island with three beige bar stools.
  • A double-rod Clérachic linear pendant lights a home office with a long desk, a swivel chair and a city view.
  • A Clérachic linear pendant with a twisting loop in its light strip glows above a long dining table and brown chairs.
  • A double-rod Clérachic linear pendant hangs above a set dining table, with a sofa and a window beyond.
  • A single-rod Clérachic linear pendant glows in the evening over a kitchen island with three cushioned stools.
  • A single-rod Clérachic linear pendant hangs above a round marble table and a curved banquette, with shelves behind.
  • A double-rod Clérachic linear pendant lit above an oval dining table with four rounded chairs on a herringbone floor.
  • A single-rod Clérachic linear pendant above a stone kitchen island with three padded stools and a timber wall.
  • A Clérachic linear pendant with looping silicone light hangs above a long table, with open shelves at the left.
  • A Clérachic linear pendant, its light strip twisting into a spiral, hangs above a dark wood table and cream chairs.
  • A double-rod Clérachic linear pendant above an oval table with swivel chairs, in a pale room with built-in shelving.
  • A Clérachic linear pendant glows above a stone kitchen island with wooden stools, beside a tall window.
  • A Clérachic linear pendant on a plain concrete-look backdrop, a single gold rod with a twisting loop of light.
  • A single-rod Clérachic linear pendant on a grey backdrop, three bright silicone loops hanging below a gold bar.
  • A double-rod Clérachic linear pendant on a grey backdrop, its gold bar held by two rods and a wavy light strip.
  • A double-rod Clérachic linear pendant on a concrete-look wall, with a twisting light strip looped round the gold bar.
  • A Clérachic linear pendant on a grey backdrop, a long gold bar with a wavy white light strip and one rod above.
3 sizes

Linear Pendant Light, Silicone LED Strip, Adjustable Height

€282Incl. VAT & Free Shipping

MaterialMetal & Silicone

Kelvin Range4500K

1

Arrives in France within Nov 30–Dec 7

Description

A gold metal frame carries a continuous white silicone LED strip bent into looping curves, like notes drawn along a stave. The integrated LED gives an even 4500 K glow with no visible bulbs. The silicone diffuses it softly along the full length of the fixture.

Pick a length from 110 cm (43.3″) to 200 cm (78.7″), with single-rod or double-rod style on the two longer sizes. The fixture hangs from a hardwired ceiling mount over a dining area, a kitchen island or an open living room.

Shipping & delivery

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Size
Dimension drawing of this Clérachic pendant light, Single-rod, 110 cm, 43.3in (110 cm) x 11.8in, single rod.
The details

Everything you need to know before it arrives

A gold metal frame carries a continuous white silicone LED strip that loops like musical notes, suspended over a dining table, kitchen island or open living space.

Installation guide

This fitting hangs from a ceiling outlet box and is wired into your mains supply. Work out your hanging height before you connect anything - it is far easier to set the drop with the wiring still loose than to redo it afterwards.

Before you start

  • Mounting: the fitting secures to a standard ceiling outlet box. The bracket and fixings are in the box.
  • Weight: check that your outlet box and ceiling can carry the fitting. Weights are listed in the Product Specifications above. A heavy chandelier may need a brace fitted between the joists.
  • Hanging height: the supplied cord, chain or rod can be shortened. Over a dining table, a drop that leaves roughly 75 to 90 cm between the table top and the bottom of the shade suits most rooms.
  • Ceiling type: every model suits a flat ceiling. Sloped-ceiling compatibility is stated per product in the Product Specifications above.
  • Power: these fittings are hardwired. They do not plug into a socket.
  • Dimming: models with a replaceable bulb can usually be dimmed with a compatible dimmer. Integrated LED models generally cannot.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire strippers
  • Wire nuts or terminal connectors (supplied)
  • Step ladder, and a second person for anything heavy or wide
  • Drill, if you are fitting a new outlet box or bracing the ceiling

Installation

1. Switch off the power

Turn the lighting circuit off at the consumer unit or breaker panel - the wall switch is not enough. Test at the ceiling outlet with a voltage tester and confirm the wires are dead.

2. Fit the mounting bracket

Screw the supplied bracket to the ceiling outlet box with the screws provided. Tighten evenly and check that it sits flat and square; a bracket that is not level will show in the finished hang.

3. Set the hanging height

Adjust the cord, chain or rod to the drop you want before you make any electrical connection. Lock the length using the canopy adjuster or the grip inside the canopy. Where a cord is shortened, coil the surplus neatly inside the canopy rather than cutting it - that keeps the height adjustable later.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Secure each connection with a connector and press the wiring gently up into the box. Nothing should be trapped between the canopy and the ceiling when you close it.

5. Fix the fitting to the bracket

Lift the canopy or backplate onto the bracket and fasten it with the screws or decorative caps supplied. Work up to a firm fit rather than forcing it - decorative caps and plated threads strip easily.

6. Fit the bulbs

Fit the bulb type and wattage listed in the Product Specifications above. Where several sockets share one shade, use identical bulbs so the colour and brightness match across the fitting.

7. Restore power and test

Switch the circuit back on and test the light, including the dimmer if you have fitted one. Isolate the power again before re-opening anything.

Important tips

  • Follow the wiring rules that apply where you live, and use a qualified electrician for high ceilings, sloped mounts or anything you are unsure of.
  • Have someone hold a wide or heavy fitting while you make the connections. Do not let it hang on its wiring at any point.
  • Clean glass and crystal with a dry, soft cloth. Do not spray cleaner onto a fitting that is wired in.
  • Do not over-tighten decorative parts: they are finished, not structural.

If anything about the fitting, the drop or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions, Single-rod, 110 cm
110 cm (43.3″)
Dimensions, Single-rod / Double-rod, 150 cm
150 cm (59.1″)
Dimensions, Single-rod / Double-rod, 200 cm
200 cm (78.7″)
Material
Metal, silicone
Light source
Integrated LED
Power
40 W (110 cm), 50 W (150 cm), 60 W (200 cm)
Colour temperature
4500 K
Voltage
AC 110–240 V
Dimming
The standard integrated LED version is not dimmable
Control method
Compatible with a standard wall switch; switch not included
Show more
Installation
Hardwired ceiling mount; professional installation is recommended
Cord length
150 cm (59″)
Adjustable height
Yes, adjustable during installation
Fixture height
30 cm (11.8″)
Location rating
Indoor dry locations only; IP20
Package includes
Light fixture, mounting hardware and installation instructions
In the room

See it in the room

A double-rod Clérachic linear pendant lights a home office with a long desk, a swivel chair and a city view.
A Clérachic linear pendant with a twisting loop in its light strip glows above a long dining table and brown chairs.
A double-rod Clérachic linear pendant hangs above a set dining table, with a sofa and a window beyond.
A single-rod Clérachic linear pendant glows in the evening over a kitchen island with three cushioned stools.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Continuous silicone LED strip gives an even, glare-free glow
  • Gold metal frame traces a musical-note line overhead
  • Three lengths, 110, 150 or 200 cm, for tables and islands
  • Cord adjusts at installation to set the hanging height
Complete the room

You might also like...

FAQ

Questions, answered

Do I need to buy bulbs separately?

No. The LED is built in, so there is no bulb to buy.

Can this light be dimmed?

No. The standard integrated LED version is not dimmable, so use a standard wall switch and not a dimmer.

What voltage does it run on?

It runs on AC 110–240 V, so it suits the mains supply in most regions.

Is mounting hardware included?

Yes. The package includes the light fixture, mounting hardware and installation instructions. Your installer may need extra anchors or fasteners for your ceiling.

How high should I hang this chandelier over a dining table?

Start with the bottom of the light about 76 to 91 cm (30 to 36″) above the tabletop. Adjust for ceiling height and keep the view across the table clear.

What size should I choose for my dining table?

Start with a light about one-half to two-thirds of your table's width. Leave space around the edges so the light does not crowd the table.

Can I adjust the hanging height?

Yes. The height is adjustable during installation, and your installer can shorten the cord to set it.

Is this chandelier hardwired or plug-in?

It is hardwired to a ceiling mount, and professional installation is recommended. It is for indoor dry locations only (IP20).

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

A single-rod Clérachic linear pendant hangs above a round marble table and a curved banquette, with shelves behind.
Free advice before you buy

Not sure which size suits your room?

Tell us about the space, the chair it will stand beside or the ceiling height, and a person on the team will suggest a size and finish.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.