Close view of a single Clérachic pendant capsule, its marbled alabaster shade glowing warm beneath a sphere joint and finial.

Capsule Alabaster Pendant Light, Rod-Hung Cluster, 1–11 Lights

15 x 35 cm
€473,00
Sale price  €473,00 Regular price 
Skip to product information
Close view of a single Clérachic pendant capsule, its marbled alabaster shade glowing warm beneath a sphere joint and finial.

Capsule Alabaster Pendant Light, Rod-Hung Cluster, 1–11 Lights

€473,00
Sale price  €473,00 Regular price 

Incl VAT, Free Shipping & Easy Returns

ARRIVES IN France WITHIN OCT 25–30
Description

A pill-shaped natural alabaster shade hangs from a rigid rod, closed at the bottom. Light glows outward through the stone instead of down. The warm white 3000 K LED is integrated into each capsule's dome cap.

Pick a single 15 × 35 cm capsule or a rod-hung cluster of 3, 5, 7, 9 or 11 lights, in black and white. It runs on AC 110–240 V and is hardwired to the ceiling, suited to a dining table, kitchen island or staircase.

Product Specifications
Dimensions ∅15 cm × H 35.1 cm (5.9″ × H 13.8″)
Product type Pendant Light, Capsule Alabaster Shade, Rigid Rod-Hung, Single or Multi-Rod Cluster (up to 11 lights), 1 hardware finish
Material Dark Bronze metal Hardware, Natural Alabaster Capsule Shade(s)
Finishes Black & White
Configuration options Single, 3-Light, 5-Light, 7-Light, 9-Light or 11-Light Cluster
Capsule shade size Φ15 × height 35 cm / Dia. 15 cm (5.9″) × H35.1 cm (13.8″) (per capsule, same across all configurations)
Light source integrated LED, Warm White 3000 K (non-replaceable)
Voltage AC 110–240 V
Control Standard wall switch
Included bulb Not applicable — the LED is integrated into each capsule's dome cap, not a separate replaceable bulb
Mounting Ceiling, Hardwired, Rigid Rod-Hung — rod lengths are pre-cut before shipping and cannot be adjusted on site
Environment Indoor, dry locations only
Suitable spaces Dining table, kitchen island, staircase, entryway
Finish, Dark Bronze & Natural Alabaster A dark bronze canopy, rod, dome cap, and finial, paired with the natural alabaster capsule shade. This is the only finish offered — the metal hardware is not available in other colours.
Configuration options, Single One capsule shade, Φ15 × height 35 cm
Configuration options, 3-Light Cluster Three capsule shades on staggered rods from a Φ30 cm / Dia. 30 cm (11.8″) round ceiling plate, overall drop 150 cm (59.1″.)
Configuration options, 5-Light Cluster Five capsule shades on staggered rods from a Φ35 cm / Dia. 35.1 cm (13.8″) round ceiling plate, overall drop 200 cm (78.7″.)
Configuration options, 7-Light Cluster Seven capsule shades on staggered rods from a Φ45 cm / Dia. 45 cm (17.7″) round ceiling plate, overall drop 250 cm (98.4″.)
Configuration options, 9-Light Cluster Nine capsule shades on staggered rods from a Φ50 cm / Dia. 50 cm (19.7″) round ceiling plate, overall drop 300 cm (118.1″.)
Configuration options, 11-Light Cluster Eleven capsule shades on staggered rods from a Φ50 cm / Dia. 50 cm (19.7″) round ceiling plate, overall drop 350 cm (137.8″.)
Dimensions, Capsule Shade Φ15 × height 35 cm (∅5.9″ × H13.8″) (same size on every configuration)
Dimensions, Single One capsule shade
Dimensions, 3-Light Cluster Φ30 cm plate × 150 cm drop (∅11.8″ × 59.1″)
Dimensions, 5-Light Cluster Φ35 cm plate × 200 cm drop (∅13.8″ × 78.7″)
Dimensions, 7-Light Cluster Φ45 cm plate × 250 cm drop (∅17.7″ × 98.4″)
Dimensions, 9-Light Cluster Φ50 cm plate × 300 cm drop (∅19.7″ × 118.1″)
Dimensions, 11-Light Cluster Φ50 cm plate × 350 cm drop (∅19.7″ × 137.8″)
Overall size Φ50 cm plate × 350 cm drop (Dia. 19.7″ × 137.8″), largest cluster
Clérachic pendant light dimension drawing, 1 of 5, every measurement marked in centimetres and inches. Clérachic pendant light dimension drawing, 2 of 5, every measurement marked in centimetres and inches. Clérachic pendant light dimension drawing, 3 of 5, every measurement marked in centimetres and inches. Clérachic pendant light dimension drawing, 4 of 5, every measurement marked in centimetres and inches. Clérachic pendant light dimension drawing, 5 of 5, every measurement marked in centimetres and inches.
Installation Guide

This fitting hangs from a ceiling outlet box and is wired into your mains supply. Work out your hanging height before you connect anything - it is far easier to set the drop with the wiring still loose than to redo it afterwards.

Before you start

  • Mounting: the fitting secures to a standard ceiling outlet box. The bracket and fixings are in the box.
  • Weight: check that your outlet box and ceiling can carry the fitting. Weights are listed in the Product Specifications above. A heavy chandelier may need a brace fitted between the joists.
  • Hanging height: the supplied cord, chain or rod can be shortened. Over a dining table, a drop that leaves roughly 75 to 90 cm between the table top and the bottom of the shade suits most rooms.
  • Ceiling type: every model suits a flat ceiling. Sloped-ceiling compatibility is stated per product in the Product Specifications above.
  • Power: these fittings are hardwired. They do not plug into a socket.
  • Dimming: models with a replaceable bulb can usually be dimmed with a compatible dimmer. Integrated LED models generally cannot.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire strippers
  • Wire nuts or terminal connectors (supplied)
  • Step ladder, and a second person for anything heavy or wide
  • Drill, if you are fitting a new outlet box or bracing the ceiling

Installation

1. Switch off the power

Turn the lighting circuit off at the consumer unit or breaker panel - the wall switch is not enough. Test at the ceiling outlet with a voltage tester and confirm the wires are dead.

2. Fit the mounting bracket

Screw the supplied bracket to the ceiling outlet box with the screws provided. Tighten evenly and check that it sits flat and square; a bracket that is not level will show in the finished hang.

3. Set the hanging height

Adjust the cord, chain or rod to the drop you want before you make any electrical connection. Lock the length using the canopy adjuster or the grip inside the canopy. Where a cord is shortened, coil the surplus neatly inside the canopy rather than cutting it - that keeps the height adjustable later.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Secure each connection with a connector and press the wiring gently up into the box. Nothing should be trapped between the canopy and the ceiling when you close it.

5. Fix the fitting to the bracket

Lift the canopy or backplate onto the bracket and fasten it with the screws or decorative caps supplied. Work up to a firm fit rather than forcing it - decorative caps and plated threads strip easily.

6. Fit the bulbs

Fit the bulb type and wattage listed in the Product Specifications above. Where several sockets share one shade, use identical bulbs so the colour and brightness match across the fitting.

7. Restore power and test

Switch the circuit back on and test the light, including the dimmer if you have fitted one. Isolate the power again before re-opening anything.

Important tips

  • Follow the wiring rules that apply where you live, and use a qualified electrician for high ceilings, sloped mounts or anything you are unsure of.
  • Have someone hold a wide or heavy fitting while you make the connections. Do not let it hang on its wiring at any point.
  • Clean glass and crystal with a dry, soft cloth. Do not spray cleaner onto a fitting that is wired in.
  • Do not over-tighten decorative parts: they are finished, not structural.

If anything about the fitting, the drop or the wiring is unclear, email info@clerachic.com and a person will answer you.

Why You'll Love It
  • Alabaster capsule shade glows outward, closed at the base
  • Rigid dark bronze rod with a sphere joint and finial
  • Cluster configurations from 3 up to 11 capsules
  • Integrated warm-white LED built into each capsule
How much is shipping?

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 27 October and 3 November.

What if it's not right?

You have 30 days to send it back. If it isn't right, its easy to return.

Need a hand?

We're one email away at info@clerachic.com — real people, before and after you buy.

Payment options
Payment methods
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Easy on the eyes

A soft, warm glow that keeps a room calm — never harsh or clinical.

Made to last

Quality-vetted materials and a considered design, made to last for years.

Free shipping, always

Free shipping to France on every order, with no minimum.

30 days to decide

Live with it first. If it's not right, return it back within 30 days — no fuss.

You might also like...

Crafted to inspire. Built to last.

Every piece is chosen by hand for craft, function, and the small details most brands skip. If we wouldn't keep it ourselves, we don't sell it to you — and every order is backed by free shipping and 30 days to change your mind.

Questions before you buy? We're real people, one email away at info@clerachic.com.