A brushed-brass gooseneck sconce with a bead pull chain, so you switch it at the fixture rather than feeling for a wall plate in the dark. The single E26/E27 socket takes any bulb you can buy anywhere, and the globe lifts out by hand — no tools, no cord, no plug. Bedside pairs, hallways, console mirrors.

What makes it work
-
Pull chain on the fixture — a long brass bead chain drops from the backplate, so the lamp switches where your hand already is.
-
Three glass globes, one brass frame — clear fluted, smoke gray or blue, each a separate moulding on the same brushed-brass arm and round backplate.
-
Shade off by hand — the globe sits in a brass gallery ring on three knurled thumbscrews, so it lifts out for cleaning or a bulb change without a tool.
Before you order
-
Hardwired — it joins your wall-switch circuit directly, with no plug and no in-line cord, so run the cable before the backplate goes on.
-
Fixing — fix the backplate into a stud or a rated wall anchor, not plasterboard alone.
-
Bedside height — a pair either side of a bed usually sits 150–160 cm (59–63″) off the floor, level with your shoulder sitting up in bed.
-
Wiring — have an electrician make the connection if you would rather not touch the wiring, or fit it yourself if you are comfortable with basic wall wiring; it is a straightforward job.
-
IP20 — no moisture protection, so dry indoor rooms rather than a bathroom or a covered porch.
-
Bulb — one E26/E27 socket, supplied separately; LED, incandescent and fluorescent all fit. The clear fluted globe shows the bulb, so a filament LED suits it best.
Glass colours
| Colour |
Unlit |
Lit |
| Clear |
Water-clear, vertically fluted globe |
Fine vertical streaks up the wall; the bulb stays visible |
| Smoke gray |
Smooth pale-grey globe, squatter profile |
Warms toward champagne |
| Blue |
Seeded green-blue glass with fine bubbles |
Holds its colour and reads softer than the other two |
Specifications
| Fixture |
Single-head wall sconce, gooseneck arm and round backplate |
| Materials |
Metal frame in a brushed brass finish, glass shade |
| Shade |
Clear fluted, smoke gray or blue glass |
| Shade fixing |
Brass gallery ring with three knurled thumbscrews, hand-tight |
| Sockets |
1 × E26/E27 |
| Bulb |
Not included — LED, incandescent or fluorescent |
| Control |
Bead pull chain on the fixture, wired to the wall-switch circuit |
| Voltage |
AC 110–240 V |
| Wiring |
Hardwired |
| Mounting |
Wall, round backplate |
| IP rating |
IP20 — dry indoor locations only |

Spec sheet and installation notes are available on request — email info@clerachic.com and we will send them over.
Frequently asked questions
Does it come with a bulb?
No. The single E26/E27 socket takes the bulb you prefer — LED, incandescent or fluorescent all fit.
How do I switch it on?
Pull the bead chain on the fixture. The sconce is also wired into your wall-switch circuit, so power reaches it from there.
Can it go in a bathroom?
No. It is rated IP20, which carries no moisture protection at all, so keep it to dry indoor rooms.
Can I take the glass off to clean it?
Yes. Three knurled thumbscrews hold the globe in its brass gallery ring — loosen them by hand and it lifts straight out. No tools needed.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.