• Clérachic square recessed downlight with white trim and a black deep-set reflector, fitted in a grey room ceiling
  • Clérachic square recessed downlight with a white trim and gold-toned reflector, lit warm on a cream plaster ceiling
  • Clérachic recessed downlights with white trims in a dining room ceiling, above a table and dark slatted wall
  • Clérachic square recessed downlight with white trim and a glowing warm gold reflector, studio view on a pale ceiling
  • Clérachic three square recessed downlights with white trims, black reflectors and warm lit bulbs, studio shot with clips
  • Clérachic square recessed downlight seen from below, white trim, black reflector and warm lit bulb with side clips, studio
  • Clérachic square recessed downlight with white trim, black reflector and spring clips, studio shot on white, side view

Recessed Downlight, Small Square LED, White Trim, 5.8 cm

€47Incl. VAT & Free Shipping
1

Arrives in France within Nov 30–Dec 7

Description

Small square recessed downlight with a white aluminium trim and a deep-set round reflector that reduces glare. A single 2 W (220 lm) COB LED module, 5.8 × 5.4 cm (2.3 × 2.1″), with a CRI above 90.

It is one single-cell module with a 5 × 5 cm (1.9 × 1.9″) cutout, hardwired to the ceiling supply on AC 120–277 V. It is rated IP20, for dry ceilings.

Shipping & delivery

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Clérachic recessed downlight dimension drawing, 5.8 × 5.4 cm, 4.8 cm deep, 5 × 5 cm cutout, measurements in cm and inches
The details

Everything you need to know before it arrives

A single rectangular recessed downlight with a white aluminium trim and a deep-set round reflector that reduces glare, rated IP20 for dry indoor ceilings.

Installation guide

Downlights install into or onto a ceiling and wire directly to a ceiling junction. Which of those it is changes the job completely, so confirm the mounting format in the Product Specifications above before you cut anything - a cutout is not reversible.

Before you start

  • Mounting format: recessed, semi-recessed, surface-mounted, trimless or track-mounted. The specification above states which your model is.
  • Ceiling type: most models suit plasterboard. Concrete and suspended ceilings need different fixings and, for concrete, a core drill.
  • Cavity depth: a recessed fitting needs clear depth above the ceiling for the body and the driver. Check the depth listed above against what you actually have, including any insulation.
  • Power: all models are hardwired to a ceiling junction.
  • Dimming: many are dimmable with a compatible driver and wall dimmer. The driver and the dimmer both have to suit the fitting.
  • Trimless: a trimless fitting is finished into the plaster and is a wet-trade job. Plan it before the ceiling is decorated.

Tools you may need

  • Drill
  • Hole cutter or drywall saw, for recessed and trimless fittings
  • Screwdriver
  • Voltage tester
  • Wire strippers
  • Wire nuts or terminal connectors
  • Screws and anchors, for surface mounting
  • Spirit level
  • Tape measure and pencil

Installation

1. Switch off the power

Turn the circuit off at the consumer unit or breaker panel and test at the junction with a voltage tester before starting.

2. Mark and cut the opening

For recessed and trimless fittings only. Use the template supplied to mark the cutout and check for joists, pipes and cables above the line before you cut. Cut slowly with a hole cutter or drywall saw. A trimless fitting needs more depth and more preparation than a standard recessed one.

3. Fit the housing or mounting hardware

  • Recessed and trimless: push the housing up into the cavity and let the spring clips take it against the plasterboard. Trimless bodies may need framing between joists to hold the line.
  • Semi-recessed: part of the body sits below the ceiling; fix it as the supplied instructions describe.
  • Surface-mounted: fix straight to the ceiling or to an existing junction box with screws and anchors.
  • Track-mounted: install the track first, then lock the fitting onto the rail.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Secure each connection and place the wiring and driver back into the cavity clear of the fitting body, where the heat is.

5. Finish

Recessed, semi-recessed and surface fittings finish by twisting or clipping the trim or body into place. Trimless fittings are filled, feathered and painted into the ceiling plane. Track heads are aimed after they lock onto the rail.

6. Restore power and test

Switch the circuit back on and test from the wall switch or dimmer. Aim adjustable heads once the room is lit and you can see where the light falls.

Important tips

  • Have trimless and recessed downlights installed professionally where plastering or insulation is involved.
  • Follow the wiring rules that apply where you live.
  • Use only the driver and dimmer specified for the fitting - a mismatched pair is the usual cause of flicker and of early driver failure.
  • Keep insulation clear of the fitting body unless it is rated for direct cover. Trapped heat shortens LED life quickly.
  • Plan the spacing before you cut. Downlights set about a metre apart light a room evenly; set them by eye and the gaps will show at night.

If anything about the cutout, the depth or the driver is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions
length 5.8 cm (2.3″), width 5.4 cm (2.1″), height 4.8 cm (1.9″); ceiling cutout 5 × 5 cm (1.9 × 1.9″)
Weight
0.18 kg (0.4 lb)
Material
aluminium trim, plastic lens and reflector
Finish
white trim
Light source
integrated COB LED
Dimming
available on request, email info@clerachic.com
Voltage
AC 120–277 V
Power factor
above 0.9
CRI
above 90 Ra
IP rating
IP20
Show more
Beam angle
15°/ 24°/ 38°/ 50°
Lifespan
rated 50,000 hours
Mounting
hardwired
Certifications
UL, CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, RoHS, SAA, VDE
Wattage
2 W (220 lm)
Clérachic recessed downlights with white trims in a dining room ceiling, above a table and dark slatted wall
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Single square module, 5.8 × 5.4 cm, 4.8 cm deep
  • White aluminium trim with a deep-set glare-cutting reflector
  • 2 W (220 lm) COB LED — CRI above 90
  • Ceiling cutout 5 × 5 cm, AC 120–277 V
Complete the room

You might also like...

FAQ

Questions, answered

How big is the hole I need to cut?

A ceiling cutout of 5 × 5 cm (1.9 × 1.9″). The body is 5.8 × 5.4 cm (2.3 × 2.1″) and 4.8 cm (1.9″) deep.

Is it one light or several?

One single-cell module.

How bright is it?

2 W and 220 lm from a COB LED, with a CRI above 90.

What is it made of?

An aluminium trim in white, with a plastic lens and reflector. The reflector is set deep to reduce glare.

Can I dim it?

Not as standard. Dimming is available on request: email info@clerachic.com before you order.

How is it installed?

It is hardwired: connected to the ceiling supply, with an electrician if you are unsure. The steps are in the Installation guide on this page, and it runs on AC 120–277 V.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Clérachic three square recessed downlights with white trims, black reflectors and warm lit bulbs, studio shot with clips
Free advice before you buy

Not sure it suits your room?

Tell us about the space and the ceiling height, and a person on the team will tell you how it will look and fit.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.