A square of light where you would normally get a circle. A single slab of natural alabaster sits in a slim black metal frame, held at two opposite corners by small brass saddles, and the whole fixture stands just 5.5 cm (2.2″) off the ceiling — close enough that it reads as part of the plaster rather than something bolted onto it. Lit, the stone turns the LED behind it into an even, low-glare wash with the veining showing through; unlit, it is a pale, quiet panel. Three squares, from 30 cm (11.8″) for a hallway up to 50 cm (19.7″) for a living room.
What makes it work
-
Natural alabaster diffuser — the stone spreads the LED across the whole face, so you get an even glow instead of a bright spot, with veining unique to your panel.
-
Only 5.5 cm (2.2″) deep — a true flush mount for rooms with low ceilings, where a pendant or a semi-flush would sit in your eyeline.
-
Integrated LED, 18 W to 48 W by size — the light source is built in, so there is no bulb to source now or replace later.
Choosing warm or cool
You pick the colour temperature when you order, and it stays fixed for the life of the fixture. Warm light is the softer, yellower option most people want in a bedroom, a hallway or a living room. Cool light is crisper and closer to daylight, which suits a kitchen, a study or a utility room. If the fixture is going in beside lights you already own, match what is there — mixed colour temperatures in one room are the thing people notice most.
Dimming
The standard build runs at full output and is not made for a wall dimmer switch. A dimmable version exists, so say the word before you order and we will set it up.
Available sizes
| Size |
Panel |
Depth |
Power |
| Small |
30 x 30 cm (11.8″ x 11.8″) |
5.5 cm (2.2″) |
approx. 18 W |
| Medium |
40 x 40 cm (15.7″ x 15.7″) |
5.5 cm (2.2″) |
approx. 36 W |
| Large |
50 x 50 cm (19.7″ x 19.7″) |
5.5 cm (2.2″) |
approx. 48 W |
Specifications
| Materials |
Natural alabaster panel, metal frame, brass corner saddles |
| Frame |
Black, with brass saddles at two opposite corners |
| Light source |
Integrated LED (no bulb required) |
| Colour temperature |
Warm or cool white, chosen at order |
| Power |
Approx. 18 W / 36 W / 48 W by size |
| Voltage |
AC 110-240 V |
| Wiring |
Hardwired |
| Mounting |
Flush to the ceiling |
| IP rating |
IP20 — indoor use only, no moisture protection |
Installation
It fixes straight to a ceiling point and wires into the mains, with no drop to set. Have an electrician make the connection if you would rather not touch the wiring, or fit it yourself if you are comfortable with basic ceiling wiring — it is a straightforward job.
Full measurements, the dimmable build and an installation guide are available on request — write to info@clerachic.com and we will send them straight back.
Frequently asked questions
Which size should I choose?
The 30 cm (11.8″) square suits a hallway, a landing or a small bedroom. The 40 cm (15.7″) covers a standard bedroom or a study. The 50 cm (19.7″), at around 48 W, is the one for a living room or an open kitchen.
Will the alabaster look exactly like the photographs?
Close, but not identical. Alabaster is a natural stone, so the veining across your panel is its own — the same warm, even light, with a pattern no other fixture has.
Can it go in a bathroom?
No. It is rated IP20, which carries no moisture protection at all, so keep it to dry indoor ceilings.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.