• Clérachic alabaster wall sconce on a beige wall above a bowl of fruit, with a vase of white daisies and a window blind to the right.
  • Slim stacked alabaster Clérachic wall sconce on a plain white backdrop, its tiers widening at the centre and lit warm from within.
  • Lit Clérachic stacked alabaster wall sconce beside a wood-panelled wall and a dark door frame, with a sprig of white blossom below.
  • Two Clérachic alabaster wall sconces on a grey wall, the left lit in a warm glow and the right switched off and pure white.
  • Clérachic stacked alabaster wall sconce on a white backdrop, four veined stone tiers narrowing towards the bottom.
  • Two shorter Clérachic alabaster wall sconces on a grey wall, their veined stone tiers stepping in towards a slim base.
  • Close view of this Clérachic alabaster wall sconce, showing the soft white veining across each stone tier.
  • Tall Clérachic alabaster wall sconce lit on a pale wall beside a dark lattice screen, with a leafy plant in a vase.
  • A Clérachic alabaster wall sconce on a beige wall with a vase of daisies and a fruit bowl on a wooden console below.
  • Unlit Clérachic alabaster wall sconce on a grey wall, its stone tiers softly mottled in white and pale pink.
  • Tall and short Clérachic alabaster wall sconces side by side on a grey wall, the left glowing warm and the right unlit.
  • Clérachic alabaster wall sconce beside a bed, with long dark curtains, a round side table and a pale headboard.
  • A Clérachic alabaster wall sconce lit above a round black side table with a book, beside a dark upholstered headboard.
  • Three tall Clérachic alabaster wall sconces on a grey wall, lit in three tones of light from warm gold to cool white.
  • Clérachic stacked alabaster wall sconce on a white backdrop, with a soft grey mountain landscape beneath it.
  • Slim three-tier Clérachic alabaster wall sconce lit on a grey wall, its glow soft along the centre of the stone.
  • Clérachic alabaster wall sconce on a grey wall, a stack of veined stone tiers narrowing to a short lit base.
  • Narrow Clérachic alabaster wall sconce on a grey wall, seen from a distance, with its stone tiers stacked in a tall column.
3 sizes

Stacked Alabaster Wall Light, Slim Column, Wall Sconce

€354Incl. VAT & Free Shipping
Colour White
1

Arrives in France within Dec 1–8

Description

Layers of natural alabaster stack into a slim vertical column. An integrated warm LED glows through each one to show the stone's veining and translucency. Metal completes the fixture, which is hardwired to the wall.

You choose a height from 39 cm (15.4″) to 72 cm (28.3″), and a standard warm or Triac dimmable version. The three heights suit bedsides, hallways and stairways.

Shipping & delivery

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 1 December and 8 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Size
Dimension drawing of this Clérachic wall light, 9 x 9 x 39 cm, W9 x L9 x H39 cm.
The details

Everything you need to know before it arrives

Layers of natural alabaster stack into a slim vertical column, an integrated LED glowing warm through each one to show the stone's veining and translucency.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions, 9 x 9 x 39 cm
9 cm × 9 cm × 39 cm (3.5″ × 3.5″ × 15.4″)
Dimensions, 9 x 10 x 60 cm
9 cm × 10 cm × 60 cm (3.5″ × 3.9″ × 23.6″)
Dimensions, 9 x 10 x 72 cm
9 cm × 10 cm × 72 cm (3.5″ × 3.9″ × 28.3″)
Material
Natural alabaster, metal
Light source
Integrated LED, warm light (3000 K)
Light versions
Warm light, or Triac dimmable warm light
Voltage
AC 110–240 V
Mounting
Wall mount, hardwired; wall plate as listed per size
Control
Common wall switch (not included), or a Triac dimmer for the dimmable version
Small size
L 9 cm × W 9 cm × H 39 cm (L 3.5″ × W 3.5″ × H 15.4″)
Show more
Medium size
L 10 cm × W 9 cm × H 60 cm (L 3.9″ × W 3.5″ × H 23.6″)
Large size
L 10 cm × W 9 cm × H 72 cm (L 3.9″ × W 3.5″ × H 28.3″)
Overall size
L 36.5 cm × W 7 cm (L 14.4″ × W 2.8″)
In the room

See it in the room

Lit Clérachic stacked alabaster wall sconce beside a wood-panelled wall and a dark door frame, with a sprig of white blossom below.
Tall Clérachic alabaster wall sconce lit on a pale wall beside a dark lattice screen, with a leafy plant in a vase.
Clérachic alabaster wall sconce beside a bed, with long dark curtains, a round side table and a pale headboard.
A Clérachic alabaster wall sconce lit above a round black side table with a book, beside a dark upholstered headboard.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Stacked natural alabaster — veining differs from piece to piece
  • Warm 3000 K LED glows through every layer
  • Three heights, 39 cm to 72 cm, for bedsides, hallways and stairways
  • A Triac dimmable version is offered; pair it with a Triac wall dimmer
Complete the room

You might also like...

FAQ

Questions, answered

Which size should I choose?

Small (H 15.4″ / 39 cm) suits bedsides and narrow walls. Medium (H 23.6″ / 60 cm) suits hallways and beside mirrors or doors. Large (H 28.3″ / 72 cm) makes a statement on stairways and tall walls. Each mounts on a slim 7 cm (2.8″) wide wall plate.

Is it dimmable?

Choose the Triac Dimmable Warm Light version and pair it with a Triac wall dimmer (not included). The standard Warm Light version works with a common on/off wall switch.

What light does it give?

An integrated LED in warm 3000 K light that glows through the stacked alabaster layers, revealing the stone's veining. There is no bulb to change.

Can I use it in a bathroom?

Not recommended for bathrooms. Alabaster is soft and porous and can absorb moisture and steam. Dust it gently with a soft, dry cloth.

Can I choose the alabaster veining?

Natural alabaster varies from piece to piece. Some pieces show rich veins, others are clean and soft white, and both are part of the stone's character rather than defects.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Two Clérachic alabaster wall sconces on a grey wall, the left lit in a warm glow and the right switched off and pure white.
Free advice before you buy

Not sure which size suits your room?

Tell us about the space, the chair it will stand beside or the ceiling height, and a person on the team will suggest a size and finish.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.