• Close view of this Clérachic wall light on a white wall, its brass rods fanning out from the central band, with soap and white flowers below.
  • Thin brass rods fan out above and below a round brass band on this Clérachic wall light, shown on a white panelled wall with a candle bulb at each end.
  • A nickel version of this Clérachic wall light has slim grey rods fanning up and down from a central band, beside a shelf of folded towels.
  • Lit on a deep blue geometric tiled wall, this Clérachic wall light throws light up and down through its fan of thin brass rods.
  • A pair of Clérachic wall lights flank a framed print above a fireplace, between tall black-framed windows and two grey tufted sofas.
  • Two brass-rod Clérachic wall lights stand either side of a framed mirror above a marble vanity with brass taps and a bunch of pink roses.
  • Two Clérachic wall lights with brass rods hang either side of a bathroom mirror, above a walnut vanity and a leafy plant.
  • A pair of brass-rod Clérachic wall lights sits at either side of a tall gold-framed mirror over a grey vanity with black taps.
  • A nickel version of this Clérachic wall light on a white backdrop, with its grey rods fanning around a central band and two candle bulbs.
  • A Clérachic wall light with brass rods hangs either side of a gold-framed mirror above a marble basin, with pink roses at the left.
  • Assembly steps for this Clérachic wall light, with hands fitting the brass rods to the backplate, next to the finished light on white.
  • Close detail views of the rods, the bulb holders, a candle bulb and the backplate band on this Clérachic wall light.
  • Close view of the brushed brass band wrapped round the rods on this Clérachic wall light, with the backplate screw beside it.
  • Close angled view of the brushed brass band and the rods of this Clérachic wall light, with a candle bulb at the top.
  • Close view of the metal bulb holder and the nickel backplate inside the rods of this Clérachic wall light, seen from below.

Sunburst Wall Light, 2 Lights, Up and Down Light, Wall Sconce

$144Incl. VAT & Free Shipping
Colour Brass
1

Arrives in United States within Dec 2–9

Description

A mid-century wall sconce in metal, with sunburst rays around two bulbs that light up and down the wall. The two candelabra bulbs (E12/E14, 60 W maximum each) can be dimmed. It suits a hallway or a bedroom.

Choose brass or nickel. The fixture is 28 cm (11″) wide and 40 cm (15.7″) high. It is hardwired and needs no assembly. The bulbs are not included.

Shipping & delivery

Free shipping to United States on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 1 December and 8 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Dimension drawing: W 28 x H 40 cm, centre 12 cm
The details

Everything you need to know before it arrives

Sunburst rays fan out from a two-light brass or nickel wall sconce, sending light both up and down to warm a hallway, bedroom or bathroom.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions
W 28 cm × H 40 cm (11″ × H 15.7″)
Material
Metal
Number of bulbs
2
Bulb base
E12/E14 candelabra
Wattage per bulb
60 W
Voltage
120/220 V
Dimmable
Yes
Power source
Hardwired
Assembly required
No
Sloped ceilings
Not compatible
Show more
Location rating
Dry
Finish
Brass, nickel
Canopy width
12 cm (4.7″)
Close view of the metal bulb holder and the nickel backplate inside the rods of this Clérachic wall light, seen from below.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Two bulbs throw light up and down the wall at once
  • Sunburst design adds warmth and a mid-century note
  • Brass or nickel finish to match your hardware
  • Compact 28 x 40 cm and no assembly needed
Complete the room

You might also like...

FAQ

Questions, answered

How big is this wall light?

It measures 28 cm wide and 40 cm tall (11″ × 15.7″).

What bulbs does it take?

It holds two E12/E14 candelabra bulbs of up to 60 W each.

Can I dim this light?

Yes, it is dimmable. Use a compatible dimmer switch and dimmable bulbs.

Does it need assembly?

No, it arrives ready to fit. It is hardwired, with a 12 cm (4.7″) wide canopy.

Can I use it on a sloped ceiling or in a damp room?

It is not compatible with sloped ceilings and is rated for dry locations only.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Thin brass rods fan out above and below a round brass band on this Clérachic wall light, shown on a white panelled wall with a candle bulb at each end.
Free advice before you buy

Not sure it suits your room?

Tell us about the space and the ceiling height, and a person on the team will tell you how it will look and fit.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.