A deep cobalt pendant dome, ∅49 cm (19.3″) across and matte through and through — one saturated colour inside and out. The black cord sets its own drop as you hang it, and the standard E26 socket takes any LED you already own. Hang it over a kitchen island, a round dining table, a hallway or a stairwell.
What makes it work
-
Hand-textured matte shade — fine horizontal ridges, the surface of a trowelled render, hold light in soft bands instead of one hard highlight.
-
Blue inside and out — no white or gold liner, so the pool of light it drops picks up a faint blue cast at the rim.
-
Substantial single pendant — ∅49 cm (19.3″) across and 29 cm (11.4″) deep, covering about a third of a round dining table: the proportion that reads deliberate rather than undersized.
Worth knowing before you order
The E26 socket takes any LED, incandescent or fluorescent lamp, so brightness and colour temperature are yours to set — the bulb is sold separately. The fixture is not dimmable, and its IP20 rating is for dry indoor rooms only: no bathrooms, no covered porches. The lower rim is deliberately uneven and the silhouette leans slightly off-centre on every unit, so the shade that reaches you carries its own asymmetry rather than matching the photographs edge for edge.
Installation
Hardwired: the cord runs from the ceiling point straight into the crown of the shade, and you set the final drop as you fit it. Over a table, hang the lower rim 76–91 cm (30–36″) above the top. Fix to a solid ceiling point rather than plasterboard alone, and handle the shade by its crown rather than its rim. Have an electrician make the connection if you’d rather not touch the wiring, or fit it yourself if you’re comfortable with basic ceiling wiring — it’s a straightforward job.

Specifications
| Shade diameter |
∅49 cm (19.3″) |
| Shade height |
29 cm (11.4″) |
| Materials |
High-density polyethylene shade, metal fittings |
| Finish |
Matte, hand-textured |
| Colour |
Blue |
| Socket |
1 × E26 — bulb sold separately |
| Bulb types |
LED, incandescent or fluorescent |
| Voltage |
AC 110–240 V |
| Wiring |
Hardwired |
| Cord |
Black, adjustable length |
| Hanging height |
Lower rim 76–91 cm (30–36″) above a tabletop |
| Dimmable |
No |
| IP rating |
IP20 · indoor use only · not moisture-rated |
| Assembly |
Required |
Need the full spec sheet or the installation guide? Email info@clerachic.com and we’ll send both over.
Frequently asked questions
How wide is the shade?
∅49 cm (19.3″) across and 29 cm (11.4″) deep — about a third of the width of a round dining table.
Is the uneven rim a fault?
No. The lower rim is irregular by design and the silhouette slightly asymmetric — that is what gives a moulded shade its hand-made character.
Does it come with a bulb, and can I dim it?
The bulb is sold separately and the socket takes a standard E26 fitting — LED, incandescent or fluorescent. The pendant is not dimmable.
Can it go in a bathroom?
No. IP20 covers dry indoor rooms, so keep it clear of showers, baths and covered outdoor spaces.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.