Clérachic magnetic track rail in black, an open channel profile fixed flush to the ceiling.

Track Lighting for Living Room, Four Head Types, 5 to 20 W

50 cm / Black
€49,00
Sale price  €49,00 Regular price 
Skip to product information
Clérachic magnetic track rail in black, an open channel profile fixed flush to the ceiling.

Track Lighting for Living Room, Four Head Types, 5 to 20 W

€49,00
Sale price  €49,00 Regular price 

Incl VAT, Free Shipping & Easy Returns

ARRIVES IN France WITHIN NOV 4–9
Description

An ultra-thin aluminium magnetic track that takes spot, flood, grille and pendant heads on the same run. Each head holds on by magnet and slides along the rail by hand, so you can move them whenever the room changes.

The rail comes in 50 cm (19.7″) or 100 cm (39.4″) lengths, in Black or White. Add floodlights, grille lights, spotlights, pendants, power supplies, connectors or a Zigbee gateway. It suits a living room.

Product Specifications
Track type ultra-thin magnetic rail, extendable with connectors
Rated life 50,000 hours
Magnetic track rail 50 cm (19.7″) or 100 cm (39.4″)
Floodlight A 31.5 cm (12.4″) or 61.5 cm (24.2″)
Floodlight B 12.2 cm (4.8″) or 23 cm (9.1″)
Grille light A 12.2 cm (4.8″) or 23 cm (9.1″)
Grille light B 12.2 cm (4.8″) or 23 cm (9.1″)
Spotlight 4.4 × 11.2 cm (1.7″ × 4.4″) or 5.5 × 13.8 cm (2.2″ × 5.4″)
Three-Spotlight 12.2 cm (4.8″)
Pendant light A 3 × 30 cm (1.2″ × 11.8″)
Pendant light B 10 × 10 cm (3.9″ × 3.9″)
50 cm 50 cm (19.7″)
100 cm 100 cm (39.4″)
Floodlight A 32 cm 32 cm (12.6″)
Floodlight A 62 cm 62 cm (24.4″)
Floodlight B 12 cm 12 cm (4.7″)
Floodlight B 23 cm 23 cm (9.1″)
Grille Light A 12 cm 12 cm (4.7″)
Grille Light A 23 cm 23 cm (9.1″)
Grille Light B 12 cm 12 cm (4.7″)
Grille Light B 23 cm 23 cm (9.1″)
Spotlight 4 cm 4 × 11 cm (1.6 × 4.3″)
Spotlight 6 cm 6 × 14 cm (2.4 × 5.5″)
Pendant Light B 10 cm (3.9″)
Power Supply 21 cm 21 × 3 × 2 cm (8.3 × 1.2 × 0.8″)
Power Supply 23 cm 23 × 3 × 2 cm (9.1 × 1.2 × 0.8″)
Power supply 200 W (22000 lm)
Material aluminium
Finish Black, White
Light source integrated LED
Dimmable Yes (With Zigbee Tuya APP)
Voltage AC 90–260 V
Mounting hardwired
Sloped ceiling Yes
Certifications UL, CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, RoHS, SAA, VDE
Wattage, Floodlight A 20 W (2200 lm)
Wattage, Floodlight B 10 W (1100 lm)
Wattage, Grille Light A 12 W (1320 lm)
Wattage, Grille Light B 12 W (1320 lm)
Wattage, Spotlight 18 W (1980 lm)
Wattage, Three-Spotlight 6 W (660 lm)
Wattage, Pendant Light A 6 W (660 lm)
Wattage, Pendant Light B 6 W (660 lm)
Clérachic light dimension drawing, Floodlight, every measurement marked in centimetres and inches. Clérachic light dimension drawing, 2 of 4, every measurement marked in centimetres and inches. Clérachic light dimension drawing, Spotlight, every measurement marked in centimetres and inches. Clérachic light dimension drawing, 4 of 4, every measurement marked in centimetres and inches.
Installation Guide

A magnetic track is a powered rail that carries interchangeable heads. The heads snap on and off by hand and can be moved at any time without tools, so the light can follow the room as it changes. The rail itself is the part that needs planning: decide the mounting style and the run before you cut or drill anything.

Before you start

  • Mounting style: the rail can be surface-mounted, recessed into the ceiling, plastered in for a trimless finish, or suspended on wires. Surface-mounting is the only one that suits a finished ceiling without building work.
  • Power feed: the rail connects to a ceiling or wall outlet box through its power feed. Longer runs may need a separate driver, sited where you can reach it later.
  • Ceiling type: flat and sloped ceilings are both supported. Recessed and plaster-in installations need the joist positions known before you cut.
  • Run length: measure the run and count your heads before ordering connectors. Rails join end to end, and corners need the matching connector.
  • Dimming: many heads dim, but the head, the driver and the dimmer all have to agree. Check all three before you buy a dimmer.
  • Load: every head on the run draws from the same supply. Add the wattages up and keep the total inside the driver's rating.

Tools you may need

  • Drill and bits
  • Screwdriver
  • Voltage tester
  • Wire strippers
  • Wire nuts or terminal connectors
  • Anchors and screws suited to your ceiling
  • Tape measure and pencil
  • Spirit level, or a laser line for a long run
  • Drywall saw, for a recessed installation
  • Suspension wires and ceiling toggles, for a hanging installation

Installation

1. Switch off the power

Turn the circuit off at the consumer unit or breaker panel and confirm with a voltage tester at the outlet box that nothing is live.

2. Choose the mounting style and prepare the surface

  • Surface-mounted: hold the rail to the ceiling, mark through the pre-drilled holes, then fix with anchors and screws. Check the line with a level or laser before the second fixing goes in.
  • Recessed: cut a slot to the rail's section, slide the channel in and screw it to the joists or framing through the holes provided.
  • Plaster-in: frame and cut so the channel finishes flush with the plasterboard, then fill, sand and paint the edge before the heads go on.
  • Suspended: mark the suspension points, fit toggles or anchor bolts, hang the wires and set the drop. Level the rail along its whole length before you tighten the wires off.

3. Connect the power feed

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Secure each connection, tuck the wiring into the box and close the feed cover. The feed is the only wired point on the system - everything after it is magnetic.

4. Join additional sections

For a longer run or a corner, join sections with the matching connector and check that the copper conductors inside the channel line up as the pieces close. A join that is mechanically tight but electrically misaligned will leave the far section dead.

  • Straight connector: joins two rails end to end in a line
  • Corner connector, ceiling to ceiling: turns the run through 90 degrees on the same plane
  • Corner connector, ceiling to wall: carries the run from ceiling onto a wall
  • T connector: branches the run three ways

5. Fit the heads

With the rail live, place each head against the channel and let the magnet pull it home. The same contact carries both the hold and the current, so a head that flickers is usually seated slightly proud - lift it off and replace it rather than pressing harder.

6. Restore power and test

Switch the circuit back on and test every head, including dimming and any directional adjustment. Set the heads where you want them last, once you can see the light in the room.

Important tips

  • Use only heads and drivers made for this track system. Magnetic rails are not a common standard and parts from another system will not seat or conduct correctly.
  • Plan recessed and plaster-in installations while the ceiling is open. Retro-fitting either into a finished ceiling means making good afterwards.
  • Check the weight a suspended run will carry, and fix into structure rather than plasterboard alone.
  • Do not over-tighten screws at a trimless or recessed edge - the channel distorts and the flush line is lost.
  • For a long run, several zones, or dimming across zones, have an electrician plan the supply with you.
  • Leave the heads until last. Fixing the rail, proving the feed and then placing the light is faster than moving heads around a run you may still need to adjust.
  • Keep one spare head position clear at each end of the run - it costs nothing now and saves cutting the rail later.

If you would like help planning a run, pairing a driver, or checking that heads and dimmers will work together, email info@clerachic.com and a person will answer you.

Why You'll Love It
  • Magnetic heads — every head holds on the rail by magnet and slides along it by hand.
  • Linear or grille faces — one continuous line of light, or rows of recessed round lenses
  • Spotlights — a single cylinder on a short bar, or three side by side on one mount
  • Connectors — four shapes join lengths of rail into a single longer run.
How much is shipping?

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 6 November and 13 November.

What if it's not right?

You have 30 days to send it back. If it isn't right, its easy to return.

Need a hand?

We're one email away at info@clerachic.com — real people, before and after you buy.

Payment options
Payment methods
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Easy on the eyes

A soft, warm glow that keeps a room calm — never harsh or clinical.

Made to last

Quality-vetted materials and a considered design, made to last for years.

Free shipping, always

Free shipping to France on every order, with no minimum.

30 days to decide

Live with it first. If it's not right, return it back within 30 days — no fuss.

Customer Reviews

Overall rating: 5.0 / 5 from 4 reviews.

Customer photo review of Track Lighting for Living Room, Four Head Types, 5 to 20 W

Quality is very good. and smart lights working really good. Pairing with hub was very easy and straightforward. The only issue I had was track fixing holes wasn't drilled properly and I had to use Dremel tool to make holes bigger. Otherwise installation was easy as well. also I had to pay custom duty which was 1/3 of total price I paid for my order. it worked out a bit too expensive for small hallway lights.

Track Lighting for Living Room, Four Head Types, 5 to 20 W

Store owner replied: So pleased with how this came together for you. Thank you for sharing. Best, Jannice from customer support :)

Customer photo review of Track Lighting for Living Room, Four Head Types, 5 to 20 W

The track is very thin, the quality of the lamp is very good ~ the power supply is also equipped with a hidden wire box, do not worry about the problem of exposed wires, the design is very good and the effect of the decoration is perfect! 5 stars recommended!!

Track Lighting for Living Room, Four Head Types, 5 to 20 W

Store owner replied: Thank you, it looks lovely where you have placed it. Best, Jannice from customer support :)

You might also like...

Crafted to inspire. Built to last.

Every piece is chosen by hand for craft, function, and the small details most brands skip. If we wouldn't keep it ourselves, we don't sell it to you — and every order is backed by free shipping and 30 days to change your mind.

Questions before you buy? We're real people, one email away at info@clerachic.com.