• Beside a rectangular mirror and a stone basin with bronze taps, this Clérachic wall sconce lights a cream plaster wall from above.
  • This Clérachic wall sconce on a plain white backdrop, a rounded travertine-look shade on a brass arm and a round brass backplate.
  • Above a bedside table with a book and dried stems, a single Clérachic travertine wall sconce casts warm light down a limewashed wall.
  • A two-light Clérachic wall sconce in brass above an arched mirror and a floating stone basin, with a soft glow beneath each shade.
  • Set in an arched alcove over a coffee corner with glasses and a small espresso machine, this two-light Clérachic sconce glows under each shade.
  • On a dark plaster wall beside a framed abstract print and a round mirror, this Clérachic wall sconce sits above a walnut sideboard.
  • A two-light Clérachic wall sconce above a bed with linen bedding and a walnut bedside table, throwing warm pools of light down the wall.
  • Over a small timber desk, a two-light Clérachic wall sconce sits on a built-in bookshelf with books and ceramic pieces.
  • Above a floating pale wooden shelf with a brass dish and dried stems, a two-light Clérachic wall sconce glows on a grey plaster wall.
  • Close view of this Clérachic wall sconce in brass on a dark wall, the porous travertine-look shade lit warmly at its opening.
  • Two rounded travertine-look shades on a long brass bar make up this Clérachic wall light, with warm light below each against a dark wall.
  • Three travertine-look globes on a straight brass bar, this Clérachic wall light throws a soft pool of light beneath each shade.
  • A single Clérachic wall sconce with a black arm and backplate, its speckled travertine-look shade glowing at the base.
  • This Clérachic wall sconce with a satin nickel arm and plate, its veined stone-look shade lit at its open base on a dark wall.
  • Two stone-look shades on a black bar and round backplate, this Clérachic wall light shines warmly downward against a dark wall.
  • This Clérachic wall light in black has three speckled stone-look shades along a straight bar, each glowing at its open base.
  • A three-light Clérachic wall light with satin nickel fittings, its three pitted stone-look shades lit from beneath on a dark wall.
  • This two-light Clérachic wall fitting in satin nickel has large stone-look shades on a straight bar, glowing warmly at the base.
3 sizes

Travertine Wall Light, Brass Mount, Wall Sconce, 1 to 3 Lights

€201Incl. VAT & Free Shipping
Finishes Beige & Brass
1

Arrives in France within Dec 1–8

Description

A wall lamp with a beige natural travertine stone shade on a mount in brass, black or satin nickel. Each stone carries its own veining, so no two shades match exactly. The height is 20 cm (7.9″) in every version.

Choose one, two or three lights, and a brass, black or satin nickel mount. The shade stays beige in every finish. Bulbs are not included.

Shipping & delivery

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 1 December and 8 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

The details

Everything you need to know before it arrives

A beige travertine stone shade rests on a brass mount, in one, two or three-light versions that stand 20 cm high and span 15 cm to 63.5 cm.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions, 1 light
L 15 cm × H 20 cm (L 5.9″ × H 7.9″)
Dimensions, 2 lights
L 45 cm × H 20 cm (L 17.7″ × H 7.9″)
Dimensions, 3 lights
L 63.5 cm × H 20 cm (L 25″ × H 7.9″)
Material
Travertine, brass
Environment
Indoor
Type
Wall lamp
Body colour
Brass, black, satin nickel
Shade colour
Beige
Natural stone
Travertine veining varies from piece to piece, so yours will not match the photos exactly
In the room

See it in the room

On a dark plaster wall beside a framed abstract print and a round mirror, this Clérachic wall sconce sits above a walnut sideboard.
Over a small timber desk, a two-light Clérachic wall sconce sits on a built-in bookshelf with books and ceramic pieces.
Above a floating pale wooden shelf with a brass dish and dried stems, a two-light Clérachic wall sconce glows on a grey plaster wall.
Close view of this Clérachic wall sconce in brass on a dark wall, the porous travertine-look shade lit warmly at its opening.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Natural travertine shade, each stone's pattern is its own
  • 1, 2 or 3 lights, from 15 cm to 63.5 cm wide
  • Brass mounting against warm beige stone
  • Same 20 cm height across every size
Complete the room

You might also like...

FAQ

Questions, answered

What sizes does this sconce come in?

It comes as 1, 2 or 3 lights. The 1-light version is L 15 cm × H 20 cm (L 5.9″ × H 7.9″), the 2-light is L 45 cm × H 20 cm (L 17.7″ × H 7.9″) and the 3-light is L 63.5 cm × H 20 cm (L 25″ × H 7.9″).

What is this wall light made from?

The shade is travertine and the mount is brass. The shade colour is beige.

What finishes can I choose?

The body comes in brass, black or satin nickel, each with a beige travertine shade.

Will the stone look exactly like the photos?

Not exactly. Travertine veining varies from piece to piece, so yours will have its own pattern and will not match the photos exactly.

Can I use it outdoors?

No. This sconce is made for indoor use only.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

A two-light Clérachic wall sconce in brass above an arched mirror and a floating stone basin, with a soft glow beneath each shade.
Free advice before you buy

Not sure which size suits your room?

Tell us about the space, the chair it will stand beside or the ceiling height, and a person on the team will suggest a size and finish.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.