• A tall sunlit living room with leather sofas and the Clérachic travertine cylinder wall light on a wooden mount.
  • The travertine cylinder wall light on a wooden mount by Clérachic, lit on warm plaster: its pitted travertine glowing softly.
  • Glowing warm white, the travertine cylinder wall light on a wooden mount by Clérachic on a plaster backdrop.
  • From a lower angle, the travertine cylinder wall light on a wooden mount by Clérachic, lit on plaster.
  • Detail of the Clérachic travertine cylinder wall light on a wooden mount, the travertine cylinder against a white plaster wall.
  • A burgundy bathroom with an arched mirror flanked by the Clérachic travertine cylinder wall light on a wooden mount.
  • A closer look at the Clérachic travertine cylinder wall light on a wooden mount: the stone cylinder lit on a burgundy wall.
2 sizes

Travertine Wall Light, Cylinder Wall Sconce, Wood Mount, 16 or 23 cm

$438Incl. VAT & Free Shipping
1

Arrives in United States within Dec 2–9

Description

A cylinder of natural travertine on a wooden wall mount, softening its bulb into a warm glow through the stone.

It comes 16 or 23 cm tall and 6.5 cm across, and takes one replaceable E27 bulb, included. Use a pair beside a bed or a mirror, or one in a hallway or living room. Each piece of stone has its own texture, so no two are quite alike.

Shipping & delivery

Free shipping to United States on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 1 December and 8 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Size
Dimension drawing: 6.5 cm across, 16 cm tall, 10 cm deep
The details

Everything you need to know before it arrives

A small travertine cylinder shade on a wooden wall mount, 16 or 23 cm tall, that diffuses a replaceable E27 bulb into a soft, warm glow.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions, Small
∅6.5 cm (2.6″), height 16 cm (6.3″)
Dimensions, Large
∅6.5 cm (2.6″), height 23 cm (9.1″)
Wattage
15 W (1500 lm)
Weight
2 kg (4.4 lb)
Material
travertine, wood
Finish
beige stone, wood
Light source
LED bulb (replaceable)
Bulbs
1 × E27, included
Dimming
available on request, email info@clerachic.com
Voltage
AC 90–260 V
Show more
Mounting
wall-mounted
Certifications
UL, CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, RoHS, SAA, VDE
Canopy
length 6.5 cm (2.6″) × height 16 cm (6.3″)
Canopy
length 6.5 cm (2.6″) × height 23 cm (9.1″)
Light colour
warm white (3000 K), neutral white (4000 K) or cool white (6000 K), as chosen in the cart
A burgundy bathroom with an arched mirror flanked by the Clérachic travertine cylinder wall light on a wooden mount.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Natural travertine cylinder
  • Wooden wall mount
  • 16 or 23 cm tall
  • E27 bulb included
Complete the room

You might also like...

FAQ

Questions, answered

Which sizes can I order?

Small, 6.5 × 16 cm, or large, 6.5 × 23 cm.

Is the stone real?

Yes. It is natural travertine, so the texture varies from piece to piece.

Which bulb does it take?

One E27 LED bulb, 15 W, included.

How much does it weigh?

About 2 kg (4.4 lb).

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Glowing warm white, the travertine cylinder wall light on a wooden mount by Clérachic on a plaster backdrop.
Free advice before you buy

Not sure which size suits your room?

Tell us about the space, the chair it will stand beside or the ceiling height, and a person on the team will suggest a size and finish.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.