Frosted Glass Ceiling Light for Hallway, 2-Tier Flush Mount, 32–40 cm

Two tiers of blown opal glass sit flush to the ceiling, just 13 cm (5.1″) deep. The SMD LED is built in: no bulb to buy, none to change. Take Dia. 32 cm (12.6″) for a hallway, landing or small bedroom; 40 cm (15.7″) for a living room, dining table or kitchen island.

What makes it work

• Even, glare-free spread — the one-piece opal body diffuses the integrated SMD LED across its whole surface, so there is no hotspot and no bulb silhouette overhead.
• Two-tier blown glass — one piece of opal glass formed as two stacked rounded tiers, so the fixture keeps real depth from below even though it sits flat to the ceiling.
• Four glass-and-trim combinations — beige or white glass, each with a chrome or gold finial, chosen when you order.

Colour temperature

Chosen at checkout, and fixed once the fitting is up — so pick for the room:

• Warm white: a soft, yellow-toned light for bedrooms, hallways and living rooms.
• Cold white: a crisp, blue-toned light for kitchens, wardrobes and utility rooms.

Before you order

The integrated LED runs at one fixed output, so this fixture does not dim. It is rated IP20, which carries no moisture protection: dry indoor rooms only, not a bathroom and not a covered porch.

Available sizes

Allow a flat ceiling area matching the diameter you choose, and 13 cm (5.1″) of clearance below — shallow enough to clear a low ceiling, a door swing or a wardrobe door.

Specifications

Installation notes

• Switch the circuit off at the consumer unit, fix the mounting plate to the ceiling box, connect live, neutral and earth, then lift the glass body onto the plate.
• No drop to measure and no chain to shorten — there is no rod, chain or cord between the shade and the ceiling.

Have an electrician make the connection if you’d rather not touch the wiring, or fit it yourself if you’re comfortable with basic ceiling wiring — it’s a straightforward job.

Technical specification sheet available on request.

Frequently asked questions

Which size should I take?
Dia. 32 cm (12.6″) for a hallway, a small bedroom or a landing; 40 cm (15.7″) for a living room, a dining table or a kitchen island, where the wider body spreads the light further.

Can I fit it in a bathroom?
No. IP20 means no protection against moisture, so keep it to dry indoor rooms.

Is it dimmable?
No. The LED is integrated and runs at one output, which is why warm white and cold white are separate choices at checkout.

Do I need bulbs?
No. The SMD LED is built into the fixture, so there is nothing to fit and nothing to change later.

Free shipping on every order. Easy returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.