Two opal glass shades, one throwing light up the wall and one down, on a body 25 cm (9.8″) tall. It sits close to the wall on a ∅ 10 cm (3.9″) round backplate, and both holders take standard E26 bulbs you can buy anywhere. Sized for a bedside, hallway, stairwell or landing.
What makes it work
-
Light up and down — two shades split the output, giving a wash on the wall and usable light at reading height instead of one flat glare.
-
Small footprint — 25 cm (9.8″) tall on a ∅ 10 cm (3.9″) backplate, narrow enough to pair either side of a bed or repeat along a hallway.
-
Three finishes, one build — gold, black and green share the same body, glass and wiring, so the choice is about the room and nothing else.
Before you order
Bulbs are not included: it takes two E26 bulbs, and since the fixture is not built for a dimmer, lighting one instead of two is the simplest way to soften the output. It is hardwired to a wall point behind the backplate — no cord, no plug, no switch on the body — so it runs from the switch already on that circuit. Rated IP20, it belongs on dry indoor walls: not a bathroom, not a covered porch.
Installation
Hold the ∅ 10 cm (3.9″) backplate against your wall box before you fix anything — a wider box wants a cover plate for a clean edge. Beside a bed, a sconce usually sits 150–165 cm (59–65″) off the floor, which puts the lower shade just above the shoulder of someone sitting up to read. Have an electrician make the connection if you'd rather not touch the wiring, or fit it yourself if you're comfortable with basic wall wiring — it's a straightforward job.
Specifications
| Materials |
Metal body and backplate, opal glass shades |
| Dimensions |
25 cm (9.8″) high × 10 cm (3.9″) wide |
| Backplate |
Round, ∅ 10 cm (3.9″) |
| Shades |
Two — one up, one down |
| Socket |
2 × E26 (bulbs not included) |
| Finishes |
Gold, Black, Green |
| Voltage |
AC 110–240 V |
| Wiring |
Hardwired |
| Mounting |
Wall, to a point behind the backplate |
| Dimmable |
No |
| IP rating |
IP20 — dry indoor use only |
| Assembly |
Required — backplate, stem and shades fit together before wiring in |

Spec sheet and installation guide available on request — email info@clerachic.com and we'll send them over.
Frequently asked questions
Are bulbs included?
No. It takes two standard E26 bulbs, sold separately.
How much wall does it take up?
It stands 25 cm (9.8″) tall on a round backplate ∅ 10 cm (3.9″) across, and sits close to the wall.
Is there a switch on the fixture?
No. It wires into the wall and runs from the switch on that circuit.
Can it go in a bathroom?
No. It is rated IP20, for dry indoor walls only.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.