• Brass Clérachic wall sconce with an opal globe hangs on a white wall above a side table with a grey glass vase, beside a curtain.
  • Brass wall sconce from Clérachic with an opal glass globe, a slim tapered stem and a round wall plate, on a pale backdrop.
  • Black wall sconce from Clérachic with an opal glass globe, a rounded stem and a round black wall plate, on a pale grey backdrop.
  • A pair of brass Clérachic wall sconces with opal globes light a bedroom with a concrete-look wall, a white bed and framed art.
  • Three black Clérachic wall sconces with opal globes glow along a stairwell with dark teal walls and white trim.
  • Black Clérachic wall sconce with an opal globe lit against a dark teal wall, beside a dark upholstered headboard.
  • Close view of the opal glass globe on this Clérachic wall sconce, lit softly, with the brass cap holding it.
  • Close view of the brushed brass stem, arm and wall plate of this Clérachic wall sconce.
  • Close view of the round brass wall plate and arm of this Clérachic wall sconce, with a small fixing screw at the edge.
2 finishes

Wall Light for Bedroom, Opal Glass Globe, 35 cm, Wall Sconce

$104Incl. VAT & Free Shipping
Colour Brass
1

Arrives in United States within Nov 30–Dec 7

Description

A hardwired wall sconce in brass or matte black metal, carrying a single white opal glass globe on a rounded wall plate. The opal glass diffuses the light into a soft, warm glow, and the fitting takes one G9 bulb of up to 10 W.

Choose brass or black. The fixture is dimmable, 35 cm (13.8″) tall and suits bedrooms, where a small, gentle light is what the wall needs.

Shipping & delivery

Free shipping to United States on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

The details

Everything you need to know before it arrives

A white opal glass globe gives off a soft, warm glow against a brass and matte black finish, 15 cm wide and 35 cm tall, for bedrooms.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions
W 15 cm × H 35 cm (5.9″ × H 13.8″)
Material
Metal, Glass
Shade material
Glass
Number of bulbs
1
Power per bulb
10 W
Bulb base
G9 (line voltage 110/220 V)
Voltage
120/220 V
Dimmable
Yes
Wiring
Hardwired
Sloped ceiling
Compatible
Show more
Location rating
Dry
Assembly required
Yes
Finish
Brass
Close view of the round brass wall plate and arm of this Clérachic wall sconce, with a small fixing screw at the edge.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Opal glass globe - a soft, warm glow that is easy on the eye
  • Choose brass or matte black, each with a rounded wall plate
  • Slim 15 cm width and 35 cm height for a small stretch of wall
  • Hardwired to the wall, so no cord is on show
Complete the room

You might also like...

FAQ

Questions, answered

How big is the wall light?

It is 15 cm (5.9″) wide and 35 cm (13.8″) high, with an opal glass shade, so it suits a bedside.

What bulb does it use?

It takes one G9 bulb of up to 10 W. The supply voltage is 120/220 V.

Can I dim it?

Yes, it is listed as dimmable. Use it with a compatible dimmer and dimmable G9 bulb.

Can I fit it on a sloped ceiling?

Yes, it is compatible with a sloped ceiling.

Is it hardwired?

Yes, it is hardwired, so it connects to your wall supply. Assembly is required, and we suggest a qualified electrician fits it.

Is it suitable for a bathroom or outdoors?

It has a dry location rating, so it suits indoor rooms away from direct water. It is not meant for damp areas or outdoor use.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Black Clérachic wall sconce with an opal globe lit against a dark teal wall, beside a dark upholstered headboard.
Free advice before you buy

Not sure it suits your room?

Tell us about the space and the ceiling height, and a person on the team will tell you how it will look and fit.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.