• Brushed brass Clérachic wall sconce with a round backplate, casting soft fans of warm light up and down a grey wall.
  • This Clérachic brushed brass wall sconce seen from the front, with warm light spreading above and below on a blue-grey wall.
  • Small Clérachic brushed brass wall sconce lit beside a large abstract painting, above a grey sofa and a brass side table.
  • Clérachic brass wall sconce glowing on a deep green wall above a bedside table with white flowers.
  • A pair of Clérachic brushed brass wall sconces lit on either side of a bed with blue velvet cushions.

Wall Light, Small Brushed Brass Ring Wall Sconce, 15 cm

$132Incl. VAT & Free Shipping
1

Arrives in United States within Nov 30–Dec 7

Description

A wall sconce made from a brushed brass circle ring set on a round canopy. It carries a single bulb, and the ring gives it a contemporary, minimal outline. It is small and simple, and it takes very little space on the wall.

The bulb is one 60 W, not included, and the sconce is hardwired. It comes in one finish, brushed brass, and in one size. Because it is so compact, it fits in places where larger sconces would be too much.

Shipping & delivery

Free shipping to United States on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Dimension drawing of this Clérachic wall light, Default Title, 15cm x 8cm, 10cm.
The details

Everything you need to know before it arrives

A brushed brass circle ring, 15 cm wide and 8 cm tall, sits on a round 10 cm canopy, a small wall light that takes little space.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions
W 15 cm × H 8 cm (5.9″ × H 3.1″)
Material
Metal
Bulb
1 × G45
Bulb base
E26/E27
Wattage per bulb
60 W
Voltage
120/220 V
Power source
Hardwired
Junction box
No
Sloped ceiling
Not compatible
Assembly required
Yes
Show more
Location rating
Dry location
Finish
Brass
Canopy width
10 cm (3.9″)
A pair of Clérachic brushed brass wall sconces lit on either side of a bed with blue velvet cushions.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Circle ring outline in brushed brass, simple and contemporary
  • Compact 15 cm width saves space that larger fixtures take up
  • Round 10 cm canopy keeps the mount neat against the wall
  • Single light for a gentle level of lightness
Complete the room

You might also like...

FAQ

Questions, answered

How small is it?

It measures W 15 cm × H 8 cm (5.9″ × H 3.1″).

What bulb does it take?

It takes 1 × G45 bulb with an E26/E27 base, up to 60 W.

Does it need a junction box?

No, the specifications list no junction box. It is hardwired, so have it fitted to a suitable electrical supply.

What is it made from?

It is made from metal, with a brass finish.

What voltage does it work on?

It is made for AC 120/220 V.

Can I fit it on a sloped ceiling?

No, it is not compatible with sloped ceilings. The canopy is 10 cm (3.9″) wide.

Where can I use it?

It is rated for dry locations, so it suits indoor rooms away from direct water.

Does it need assembling?

Yes, some assembly is required. The parts are put together as part of fitting the light.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

This Clérachic brushed brass wall sconce seen from the front, with warm light spreading above and below on a blue-grey wall.
Free advice before you buy

Not sure it suits your room?

Tell us about the space and the ceiling height, and a person on the team will tell you how it will look and fit.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.