• Angled shade of this Clérachic wall light with two walnut rings and a polished chrome stem, on a cream wall above a dark cushion.
  • Studio view of this Clérachic wall light on a plain white backdrop, with a walnut-wood shade in two rings, a chrome arm and a round wall plate.
  • Lit bulb glowing under the walnut and chrome shade of this Clérachic wall light, beside a framed poster and green leaves on a white wall.
  • This Clérachic wall light tilted outward on its chrome arm, the bulb visible under the walnut rings, with leaves and a framed print beside it.
  • Side view of this Clérachic wall light, its walnut rings and chrome cap on a short arm against a soft peach wall with a cord running down.
  • A Clérachic wall light mounted beside a wooden bedhead in a bedroom, above a vase of yellow flowers and a bedside table.
  • Small Clérachic wall light on a white panelled wall, its lit walnut shade and chrome cap with a black cord falling below, a trailing plant under it.
  • Soft-focus leaves frame this Clérachic wall light, its walnut shade lit on a chrome arm against a pale wall with a black cord below.
  • This Clérachic wall light turned toward the right, its lit walnut shade on a chrome arm, against a white wall with a doorway behind it.
  • Chrome wall plate and arm of this Clérachic wall light, with the two walnut rings angled down on a pale wall with a black cord.
  • A Clérachic wall light on a white wall beside a large framed poster, above a wooden console with a woven basket, its black cord hanging down.
  • Close view of the chrome wall plate and angled walnut shade of this Clérachic wall light against a white wall and a lilac cushion.
  • This Clérachic wall light with its lit walnut shade turned down and to the side, against a white wall with a pale curtain behind.
  • A Clérachic wall light glowing warm above a leafy plant, beside a framed poster and a woven basket on a wooden table.
  • Small Clérachic wall light in a corner above a wooden console with a basket and a tray, a framed poster and window blind beside it.
  • Studio view of this Clérachic wall light on a plain white backdrop, the shade tilted down with a soft glow from the bulb and a black cord below.
  • Close-up of the chrome wall plate and swivel joint of this Clérachic wall light, with the walnut shade blurred behind.
  • Detail of the two walnut rings of this Clérachic wall light, with a chrome band between them, two metal screws and the bulb below.
  • A Clérachic wall light with a chrome plate and tilted walnut shade on a white wall, a black cord running straight down below it.
  • Close view of this Clérachic wall light against a white and grey wall, the chrome arm and walnut shade angled out from the round plate.

Walnut Wood Wall Light, Chrome, Tiltable Plug In, Wall Sconce

€136Incl. VAT & Free Shipping

Size13 × 16 cm

ColourWalnut & Chrome

1

Arrives in France within Nov 30–Dec 7

Description

Compact wall lamp in chrome-finished metal and solid walnut, with a tilting head that turns the light where you need it. It takes an E26 or E27 bulb, LED or Edison, so the colour of the light is yours to set.

It plugs in with a 150 cm (59″) cord and an inline on/off switch. Choose a US, UK, AU or EU plug to fit your sockets; that is the only choice to make.

Shipping & delivery

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Size
Dimension drawing of this Clérachic wall light, 13 x 16 cm, with its height, shade width and depth marked.
The details

Everything you need to know before it arrives

Chrome-finished metal and solid walnut wood meet in a compact plug-in wall lamp, 13 cm across and 16 cm tall, with a tiltable design inspired by Japanese aesthetics.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions
∅13 cm × H 16 cm (5.1″ × H 6.3″)
Materials
Metal, walnut wood
Bulb base
E26 or E27 socket
Bulb type
LED or Edison bulb
Voltage
AC 110–240 V
Switch
Inline on/off switch
Mounting
Wall mount, plug-in
Cord length
150 cm (59″)
Plug type
US, UK, AU or EU
Finish
Walnut colour and chrome
In the room

See it in the room

Lit bulb glowing under the walnut and chrome shade of this Clérachic wall light, beside a framed poster and green leaves on a white wall.
This Clérachic wall light tilted outward on its chrome arm, the bulb visible under the walnut rings, with leaves and a framed print beside it.
A Clérachic wall light glowing warm above a leafy plant, beside a framed poster and a woven basket on a wooden table.
Close view of this Clérachic wall light against a white and grey wall, the chrome arm and walnut shade angled out from the round plate.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Tiltable design — turn the light exactly where you need it
  • Chrome-finished metal paired with solid walnut wood
  • Compact 13 cm diameter and 16 cm height for a small wall footprint
  • Plug-in with a 150 cm cord and inline on/off switch — no wiring
Complete the room

You might also like...

FAQ

Questions, answered

What are the exact dimensions of this wall lamp?

The lamp measures 13 cm × 16 cm (5.1″ diameter × 6.3″ height).

What materials is this lamp made from?

It's crafted from walnut wood and chrome-finished metal.

Is this lamp plug-in or hardwired?

It's plug-in with a 150 cm (59″) power cord and inline on/off switch. No hardwiring needed.

How do I install this wall lamp?

See the assembly guide for step-by-step instructions.

What voltage does this lamp operate on?

It operates on AC 110–240 V, compatible with North America, Europe, Australia, and Saudi Arabia.

What type of bulb does this lamp use?

It takes an E26 or E27 base, with either an LED bulb or an Edison bulb.

Can I adjust the lamp's direction?

Yes. The tiltable design lets you point the light where you need it.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Studio view of this Clérachic wall light on a plain white backdrop, with a walnut-wood shade in two rings, a chrome arm and a round wall plate.
Free advice before you buy

Not sure which size suits your room?

Tell us about the space, the chair it will stand beside or the ceiling height, and a person on the team will suggest a size and finish.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.