A ∅8 cm (3.1″) cylinder that sits 7 cm (2.8″) off the ceiling — a spot of light, not a centre fitting. The LED board is built in, so there is no bulb to buy and nothing to match years later. Fit two or three in a line down a hallway, across a landing or above a bed.
What makes it work
-
Integrated LED board — the SMD panel is built into the body, so there is no socket, no bulb to source and nothing to match years after the room was decorated.
-
Four outputs, three light colours — 5 W, 7 W, 12 W and 15 W, each offered in Warm White, Cold White or 3 Color Change, which switches between light colours instead of fixing one.
-
Recessed acrylic diffuser — a flat white disc set just inside the rim of the painted aluminium body, under a wood-grain collar, so no bulb shape shows through.
-
Seven body colours — White, Gray, Green, Yellow, Pink, Blue and Black, all in the same matte finish.
Size and output
One body size across every colour and output.
| Diameter |
Below the ceiling |
Output options |
| ∅8 cm (3.1″) |
7 cm (2.8″) |
5 W · 7 W · 12 W · 15 W |
Light colour — choose at checkout
-
Warm White: soft and restful, for bedrooms, landings and living rooms.
-
Cold White: crisp and bright, for hallways, kitchens and stairwells.
-
3 Color Change: switches between light colours instead of fixing one, so a single fitting covers both.

Before you order
The output is fixed and the fitting is not dimmable, running on a standard on/off switch, so settle the wattage before you order rather than planning to swap a bulb later. It carries no moisture rating: keep it to hallways, landings, bedrooms, living and dining rooms, not a bathroom, a shower zone or a covered porch. Fitting is hardwired and takes one assembly step first — the ceiling plate goes up, then the body slides onto it. Have an electrician make the connection if you'd rather not touch the wiring, or fit it yourself if you're comfortable with basic ceiling wiring — it's a straightforward job.
Specifications
| Diameter |
∅8 cm (3.1″) |
| Height below the ceiling |
7 cm (2.8″) |
| Body |
Painted aluminium with a wood-grain collar |
| Diffuser |
Flat acrylic disc, recessed inside the rim |
| Light source |
Integrated SMD LED board — no separate bulb |
| Output options |
5 W · 7 W · 12 W · 15 W |
| Light colour options |
Warm White · Cold White · 3 Color Change |
| Body colour options |
White · Gray · Green · Yellow · Pink · Blue · Black |
| Voltage |
AC 110–240 V |
| Mounting |
Surface mounted flush to the ceiling, hardwired |
| Dimmable |
No — standard on/off switch |
| Location |
Indoor, dry rooms |
| In the box |
One fitting with its ceiling plate and fixing screws |

Spec sheet and installation guide available on request — email info@clerachic.com and we'll send them over.
Frequently asked questions
Do I need to buy a bulb?
No. The LED board is built into the fitting, so there is no socket and nothing to buy alongside it.
Is it dimmable?
No. It runs at one fixed output on a standard on/off switch, which is why the 5 W, 7 W, 12 W and 15 W choice matters at the point of order.
Can it go in a bathroom or under a porch?
No. It carries no moisture rating, so it belongs in dry indoor rooms — hallways, landings, bedrooms, living and dining rooms.
How far does it hang below the ceiling?
7 cm (2.8″). It fixes straight to a ceiling plate with no cord, chain or rod, so nothing drops into head height.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.