A blown-glass pendant capped by a turned wood cone — the wood sits on top of the shade, not under it. Standard E26/E27 lampholders take a bulb you can buy anywhere, and the braided cord runs to 150 cm (59″). One head, or two or three along a wood bar: kitchen island, dining table, breakfast bar, hallway.
What makes it work
-
Turned wood cap — pale, open-grained hardwood over blown glass, finished with a slim chrome cord grip where the braided flex meets it.
-
Recessed diffuser disc — a white disc set just inside the open rim, so from below you see a soft glowing disc rather than a bare bulb, and the light falls in a defined pool on the table instead of washing the ceiling.
-
Orange or white glass — orange is a warm, honeyed tone that deepens toward the rim; white is opal milk glass, cool off-white until a bulb warms its centre. Both are high-gloss.
-
One head or a linear bar — a single ∅ 27.9 cm (11″) shade on a round wood canopy, or two and three shades spaced along a straight wood bar, 55.1 cm (21.7″) and 87.9 cm (34.6″) long.
Before you fit it
Bulbs are supplied separately — one E26 or E27 per head, LED, incandescent or fluorescent. It is hardwired to a ceiling point and switches at the wall (the switch itself is not included), with a short assembly step before it goes up. The braided cord runs to 150 cm (59″), set at installation and extendable on request; over a dining table the bottom of a pendant usually sits 75–90 cm (30–35″) above the tabletop. It is rated IP20 — indoor, dry locations only — so keep it clear of bathrooms and covered porches. Have an electrician make the connection if you'd rather not touch the wiring, or fit it yourself if you're comfortable with basic ceiling wiring — it's a straightforward job.
Available sizes
| Version |
Mount |
Width |
Cord |
| 1 head |
Round wood canopy |
∅ 27.9 cm (11″) shade |
up to 150 cm (59″) |
| 2 heads |
Straight wood bar |
55.1 cm (21.7″) |
up to 150 cm (59″) |
| 3 heads |
Straight wood bar |
87.9 cm (34.6″) |
up to 150 cm (59″) |
Specifications
| Materials |
Blown glass shade, natural wood cap, metal collar and canopy |
| Glass colours |
Orange, white |
| Lampholders |
One E26/E27 per head |
| Bulbs |
Sold separately — LED, incandescent or fluorescent |
| Voltage |
AC 110–240 V |
| Wiring |
Hardwired, standard wall switch (switch not included) |
| Cord |
150 cm (59″), adjustable at installation, extendable on request |
| Mounting |
Round wood canopy (1 head) or straight wood bar (2 and 3 heads) |
| IP rating |
IP20 — indoor, dry locations only |
| Assembly |
Short assembly required |
Full measurements and an installation guide are available on request — email info@clerachic.com and we'll send them over.
Frequently asked questions
Are bulbs included?
No. Each head takes a standard E26 or E27 bulb, so you choose the brightness and the colour temperature — LED, incandescent and fluorescent all fit.
How low will it hang?
The braided cord runs to 150 cm (59″) and is set at installation, so it can sit low over a table or tight under a high ceiling. Longer cord is available on request.
What is the difference between the sizes?
One head hangs from a round wood canopy. Two and three heads are spaced along a straight wood bar, 55.1 cm (21.7″) and 87.9 cm (34.6″) long.
Can it go in a bathroom?
No. It is rated IP20 for indoor, dry locations only.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.