Clérachic sconce in antique brass on a dark charcoal plaster wall, its pale alabaster columns hanging beneath a gold-toned arch.

Væglampe med stablet alabast, antik messing, væglampe

21 x 50 cm / Antik messing & hvid / Varmt lys
€680,00
Udsalgspris  €680,00 Normalpris 
Spring til produktinformation
Clérachic sconce in antique brass on a dark charcoal plaster wall, its pale alabaster columns hanging beneath a gold-toned arch.

Væglampe med stablet alabast, antik messing, væglampe

€680,00
Udsalgspris  €680,00 Normalpris 

Inkl. moms, gratis levering og nem returnering

Størrelse21 x 50 cm
ARRIVES IN Frankrig WITHIN NOV 7–12
Beskrivelse

Two parallel columns of stacked genuine alabaster rings hang from a metal frame in antique brass or bronze. An integrated LED behind the stone gives a soft, warm glow that shows the veining ring by ring.

This hardwired wall sconce stands 50 cm (19.7″) tall and needs a junction box. You choose the frame, antique brass or bronze with white stone, and Warm Light or the dimmable Triac version. It suits a hallway or a living space.

Produktspecifikationer
Dimensions ∅21 cm × H 50 cm (8.3″ × H 19.7″)
Materials metal frame, genuine alabaster stone shades
Shade construction stacked individual alabaster rings, hand-assembled
Type wall sconce, dual alabaster cylinder columns
Light source integrated LED
Colour temperature 3000 K warm
Voltage AC 110–240 V
Dimming the Triac Warm Dimming version is dimmable; pair it with a Triac (Thyristor) wall dimmer
Mounting hardwired wall mount, junction box required
Wiring connect black to black (live), white to white (neutral) and green or bare copper to ground; cap each junction with a wire nut
Body finish bronze / antique brass
Shade finish natural white alabaster (translucent)
Installationsvejledning

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Derfor vil du elske den
  • Genuine alabaster rings with natural veining, each piece one of a kind
  • Two parallel columns give a sculptural, architectural profile
  • Bronze-toned antique-brass frame against translucent white stone
  • Warm 3000 K glow; the Triac version dims on a Triac wall dimmer
Hvor meget koster leveringen?

Fri fragt til Frankrig på alle ordrer uden minimumskøb.

Hvert stykke fremstilles på bestilling, så beregn i alt 7 til 12 hverdage. Bestil i dag, så kan du forvente den mellem 10 November og 17 November.

Hvad nu, hvis det ikke er rigtigt?

Du har 30 dage til at sende den tilbage. Hvis den ikke er rigtig, er det nemt at returnere den.

Har du brug for hjælp?

Vi er kun én e-mail væk på info@clerachic.com – rigtige mennesker både før og efter dit køb.

Betalingsmuligheder
Betalingsmetoder
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Skånsom for øjnene

Et blødt, varmt skær, der holder rummet roligt – aldrig skarpt eller klinisk.

Skabt til at holde

Kvalitetstestede materialer og et gennemtænkt design, der holder i mange år.

Altid gratis levering

Fri fragt til Frankrig på alle ordrer uden minimumskøb.

30 dage til at beslutte dig

Lev med det først. Hvis det ikke føles rigtigt, kan du returnere det inden for 30 dage – helt uden besvær.

Du kunne måske også lide...

Skabt til at inspirere. Bygget til at holde.

Hvert produkt udvælges i hånden med fokus på håndværk, funktion og de små detaljer, som de fleste mærker overser. Hvis vi ikke selv ville beholde det, sælger vi det ikke til dig — og alle ordrer inkluderer gratis fragt og 30 dages returret.

Spørgsmål, før du køber? Vi er rigtige mennesker – kun én e-mail væk på info@clerachic.com.