Semi-Flush Ring Chandelier for Dining Table, Alabaster, Bronze Frame

A ring of natural alabaster, lit from inside, held flat beneath the ceiling on three curved bronze arms. Unlit, it reads as a pale marbled band broken into arcs by dark bronze straps. Switched on, the stone becomes the light source — the veining darkens into the glow, the whole circumference lifts evenly, and there is no bulb to look at and nothing glaring down at the table. The smallest ring spans 60 cm (23.6″) and drops just 50 cm (19.7″) below the ceiling, so it suits a standard-height room where a long chandelier would crowd the space; the largest opens to 100 cm (39.4″) for a wide table or an open-plan room.

What makes it work

• One continuous alabaster ring — natural stone spreads the LED across the full band, so the light is wide and soft rather than a single point of glare.
• Semi-flush on three arms — the canopy sits tight to the ceiling and the ring hangs just below it, which keeps it usable in rooms a long-drop chandelier would swallow.
• Warm, cool or dimmable — the light is chosen at checkout, and the Triac Warm Dimming option runs from an ordinary wall dimmer.

Choosing your light

The LED is built into the ring, so the option you pick at checkout is the one you keep. Warm Light is the softer, more golden setting — the usual choice over a dining table or in a living room. Cool Light is crisper and whiter, and reads better in a kitchen or a work space. Triac Warm Dimming is the one to take if the fixture is going on a dimmer: it runs from a standard Triac (leading-edge) wall dimmer, and the tone warms as you bring the level down, the way a filament bulb does. The other two run at a fixed level.

Natural stone, and what that means

Alabaster is quarried, not moulded, so the veining, the tone and the way each arc takes the light belong to the piece that reaches you. Treat the photographs as the character of the fixture rather than a map of your own. The LED is integrated as well: there are no bulbs to buy, and none to change later.

Fitting it

This one is hardwired — it connects to a ceiling point, not a plug. The canopy carries the weight through the three arms and the ring sits level underneath, so fix into a joist or a rated ceiling brace rather than plasterboard alone, particularly on the 100 cm (39.4″) ring. It is rated IP20, which carries no moisture protection, so keep it to dry indoor rooms — not a bathroom, not a covered porch.Available sizes

Specifications

Measured drawings and installation notes are available on request — email info@clerachic.com and we will send them straight over.

Frequently asked questions

Can I put it on a dimmer?
Yes, if you choose the Triac Warm Dimming option. It runs from a standard Triac (leading-edge) wall dimmer and warms in tone as you take the level down. The Warm Light and Cool Light versions run at a fixed level.

How far below the ceiling does it hang?
50 cm (19.7″) overall on the 60 cm (23.6″) ring, and 60 cm (23.6″) on both the 80 cm (31.5″) and 100 cm (39.4″) rings.

Do I need to buy bulbs?
No. The LED is built into the ring, so it arrives ready to wire and light.

Can it go in a bathroom or on a covered porch?
No. It is rated IP20 — a dry-room rating with no moisture protection — so keep it to indoor rooms.

Free shipping on every order. Easy returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.