Straight-on view of this Clérachic brass wall light lit against a dark wall, the two tubes glowing warm on a looped frame.

Mosiężna lampa ścienna, dwa ryflowane szklane klosze, kinkiet, 70 cm

17 x 70 cm / Polerowany mosiądz
€254,00
Cena promocyjna  €254,00 Cena regularna 
Pomiń, aby przejść do informacji o produkcie
Straight-on view of this Clérachic brass wall light lit against a dark wall, the two tubes glowing warm on a looped frame.

Mosiężna lampa ścienna, dwa ryflowane szklane klosze, kinkiet, 70 cm

€254,00
Cena promocyjna  €254,00 Cena regularna 

Z VAT, darmowa wysyłka i łatwe zwroty

Rozmiar17 x 70 cm
WykończeniaPolerowany mosiądz
ARRIVES IN Francja WITHIN NOV 7–12
Opis

A polished brass frame with circular accents holds two clear, vertically ribbed glass cylinders on the wall. It is hardwired and takes a G9 bulb, which is not supplied.

Slim and tall, it suits the narrow stretch of wall beside a bed, along a hallway or at an entry. The finish is polished brass with clear glass shades, in one size.

Specyfikacja produktu
Dimensions ∅17 cm × H 70 cm (6.7″ × H 27.6″)
Type Wall lamp
Material Brass, glass
Environment Indoor
Finish Polished brass
Shade colour Clear
Note The backplate is narrow, so it may not cover a standard wall junction box; a slim box gives the neatest fit with no gaps at the sides.
Dimension drawing of this Clérachic wall light, with its height, width and wall plate size marked.
Instrukcja instalacji

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Dlaczego to pokochasz
  • Polished brass frame — circular accents add a quiet, classic detail
  • Ribbed clear glass tubes — a fine vertical pattern in the light
  • 70 cm tall and slim, 17 cm across — suits narrow wall spaces
  • Two glass shades in one fixture for bedside, hallway or entry
Ile kosztuje wysyłka?

Darmowa wysyłka do Francja przy każdym zamówieniu, bez minimalnej kwoty.

Każdy element jest wykonywany na zamówienie, dlatego realizacja zajmuje łącznie od 7 do 12 dni roboczych. Zamów dzisiaj, a możesz spodziewać się dostawy między 10 November a 17 November.

A jeśli to nie jest właściwe?

Masz 30 dni na odesłanie produktu. Jeśli coś jest nie tak, łatwo go zwrócić.

Potrzebujesz pomocy?

Wystarczy jeden e-mail na info@clerachic.com — po drugiej stronie są prawdziwi ludzie, zarówno przed zakupem, jak i po nim.

Opcje płatności
Metody płatności
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Przyjemne dla oczu

Delikatne, ciepłe światło, które zapewnia w pomieszczeniu spokojną atmosferę — nigdy ostre ani sterylne.

Stworzone, by służyć przez lata

Materiały o potwierdzonej jakości i przemyślany design, stworzone z myślą o wieloletniej trwałości.

Darmowa wysyłka, zawsze

Darmowa wysyłka do Francja przy każdym zamówieniu, bez minimalnej kwoty.

30 dni na podjęcie decyzji

Najpierw pomieszkaj z nim. Jeśli to nie będzie to, zwróć go w ciągu 30 dni — bez problemu.

Może Ci się również spodobać...

Stworzone, by inspirować. Zbudowane, by służyć przez lata.

Każdy produkt wybieramy ręcznie, zwracając uwagę na jakość wykonania, funkcjonalność i drobne detale, które większość marek pomija. Jeśli sami nie chcielibyśmy go zatrzymać, nie sprzedamy go Tobie — a każde zamówienie obejmuje bezpłatną dostawę i 30 dni na zmianę decyzji.

Masz pytania przed zakupem? Jesteśmy prawdziwymi ludźmi — wystarczy wysłać wiadomość na adres info@clerachic.com.