• Clérachic round-canopy chandelier of alabaster cylinders lit over a marble kitchen island with walnut cabinets and wooden stools.
  • Clérachic cluster chandelier of lit alabaster cylinders at staggered heights from a round black canopy, studio shot.
  • Clérachic cluster chandelier switched off, pale alabaster cylinders on black cords from a round black canopy, studio shot.
  • Clérachic chandelier of glowing alabaster cylinders at varied heights on black cords from a round black canopy, studio shot.
  • Clérachic chandelier switched off, alabaster cylinders in a staggered cluster on black cords under a round black canopy.
  • Clérachic chandelier with a lit cluster of alabaster cylinders on long black cords from a smaller round black canopy, studio shot.
  • Clérachic chandelier switched off, a cluster of alabaster cylinders on long black cords from a round black canopy, studio shot.
  • Clérachic chandelier of lit alabaster cylinders in a compact staggered cluster beneath a round black canopy, studio shot.
  • Clérachic chandelier switched off, compact cluster of veined alabaster cylinders under a round black canopy, studio shot.
  • Clérachic chandelier of seven lit alabaster cylinders at staggered heights on thin black cords from a round black canopy.
  • Clérachic chandelier switched off, seven veined alabaster cylinders at staggered heights from a round black canopy, studio shot.
  • Clérachic chandelier of five lit alabaster cylinders hanging at different heights from a small round black canopy, studio shot.
  • Clérachic chandelier switched off, five alabaster cylinders at different heights from a small round black canopy, studio shot.
  • Clérachic chandelier of three lit alabaster cylinders at different heights from a round black canopy, studio shot.
  • Clérachic chandelier switched off, three alabaster cylinders on black cords at different heights from a round black canopy.
  • Clérachic single alabaster cylinder pendant glowing warm on a black cord from a small round black canopy, studio shot.
  • Clérachic single alabaster cylinder pendant switched off, hanging from a black cord and small round black canopy, studio shot.
  • Close up of a Clérachic alabaster cylinder pendant glowing warm, veined stone texture against walnut wood panelling.
  • Clérachic cluster of alabaster cylinder pendants glowing over a round wooden table in a dining nook with green plaid seating.
  • Close up of Clérachic alabaster cylinder pendants glowing at staggered heights with dark metal cord caps in a warm room.

Alabaster Chandelier, Cylinder Cluster, 1–18 Lights, 25 cm Heads

$1,476Incl. VAT & Free Shipping
1

Arrives in United States within Nov 30–Dec 7

Description

An alabaster chandelier of cylinders, each 25 cm (9.8″) tall and 6 cm (2.4″) across, hung at staggered heights from a round canopy. Each head gives a soft, warm 3000 K glow.

Choose a cluster of 1, 3, 5, 7, 9, 12, 16 or 18 lights, each with its own E27 bulb included. The cord adjusts up to 1.5 m (5 ft) and the fixture is hardwired. It suits entryways, stairwells and dining rooms.

Shipping & delivery

Free shipping to United States on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

The details

Everything you need to know before it arrives

Alabaster marble cylinders, each 25 cm tall, hang from iron cords in clusters of 1 to 18, giving a soft, halo-like warm glow.

Installation guide

This fitting hangs from a ceiling outlet box and is wired into your mains supply. Work out your hanging height before you connect anything - it is far easier to set the drop with the wiring still loose than to redo it afterwards.

Before you start

  • Mounting: the fitting secures to a standard ceiling outlet box. The bracket and fixings are in the box.
  • Weight: check that your outlet box and ceiling can carry the fitting. Weights are listed in the Product Specifications above. A heavy chandelier may need a brace fitted between the joists.
  • Hanging height: the supplied cord, chain or rod can be shortened. Over a dining table, a drop that leaves roughly 75 to 90 cm between the table top and the bottom of the shade suits most rooms.
  • Ceiling type: every model suits a flat ceiling. Sloped-ceiling compatibility is stated per product in the Product Specifications above.
  • Power: these fittings are hardwired. They do not plug into a socket.
  • Dimming: models with a replaceable bulb can usually be dimmed with a compatible dimmer. Integrated LED models generally cannot.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire strippers
  • Wire nuts or terminal connectors (supplied)
  • Step ladder, and a second person for anything heavy or wide
  • Drill, if you are fitting a new outlet box or bracing the ceiling

Installation

1. Switch off the power

Turn the lighting circuit off at the consumer unit or breaker panel - the wall switch is not enough. Test at the ceiling outlet with a voltage tester and confirm the wires are dead.

2. Fit the mounting bracket

Screw the supplied bracket to the ceiling outlet box with the screws provided. Tighten evenly and check that it sits flat and square; a bracket that is not level will show in the finished hang.

3. Set the hanging height

Adjust the cord, chain or rod to the drop you want before you make any electrical connection. Lock the length using the canopy adjuster or the grip inside the canopy. Where a cord is shortened, coil the surplus neatly inside the canopy rather than cutting it - that keeps the height adjustable later.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Secure each connection with a connector and press the wiring gently up into the box. Nothing should be trapped between the canopy and the ceiling when you close it.

5. Fix the fitting to the bracket

Lift the canopy or backplate onto the bracket and fasten it with the screws or decorative caps supplied. Work up to a firm fit rather than forcing it - decorative caps and plated threads strip easily.

6. Fit the bulbs

Fit the bulb type and wattage listed in the Product Specifications above. Where several sockets share one shade, use identical bulbs so the colour and brightness match across the fitting.

7. Restore power and test

Switch the circuit back on and test the light, including the dimmer if you have fitted one. Isolate the power again before re-opening anything.

Important tips

  • Follow the wiring rules that apply where you live, and use a qualified electrician for high ceilings, sloped mounts or anything you are unsure of.
  • Have someone hold a wide or heavy fitting while you make the connections. Do not let it hang on its wiring at any point.
  • Clean glass and crystal with a dry, soft cloth. Do not spray cleaner onto a fitting that is wired in.
  • Do not over-tighten decorative parts: they are finished, not structural.

If anything about the fitting, the drop or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions, each alabaster head
∅6 cm (2.4″), height 25 cm (9.8″)
Weight, 1 light
2 kg (4.4 lb); 3 lights: 6 kg (13.2 lb); 5 lights: 10 kg (22 lb); 7 lights: 14 kg (30.9 lb); 9 lights: 18 kg (39.7 lb); 12 lights: 24 kg (52.9 lb); 16 lights: 32 kg (70.5 lb); 18 lights: 36 kg (79.4 lb)
Material
alabaster marble, iron
Light source
LED bulb (replaceable)
Bulbs
E27, one per head (1 to 18), included
Dimming
available on request, email info@clerachic.com
Voltage
AC 90–260 V
Mounting
hardwired
Cord length
up to 1.5 m (5 ft)
Adjustable cord
Yes
Show more
Sloped ceilings
ask us before ordering, email info@clerachic.com
Certifications
UL, CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, RoHS, SAA, VDE
Wattage, 1 light
5 W (500 lm)
Wattage, 3 lights
15 W (1500 lm)
Wattage, 5 lights
25 W (2500 lm)
Wattage, 7 lights
35 W (3500 lm)
Wattage, 9 lights
45 W (4500 lm)
Wattage, 12 lights
60 W (6000 lm)
Wattage, 16 lights
80 W (8000 lm)
Wattage, 18 lights
90 W (9000 lm)
Canopy
∅12, 20, 30, 40, 45, 50 or 60 cm (4.7, 7.9, 11.8, 15.7, 17.7, 19.7 or 23.6″), larger as the number of lights grows
Light colour
warm white (3000 K)
Close up of a Clérachic alabaster cylinder pendant glowing warm, veined stone texture against walnut wood panelling.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Alabaster cylinders — 25 cm (9.8″) tall, 6 cm (2.4″) across
  • Eight cluster sizes — 1, 3, 5, 7, 9, 12, 16 or 18 lights
  • Warm white 3000 K — 5 W per head, one E27 bulb each, included
  • Adjustable cord up to 1.5 m (5 ft) — hardwired, round canopy
Reviews

Reviews and photos

5.0 1 verified reviews · 1 with photos
Customer photo review of Alabaster Chandelier, Cylinder Cluster, 1–18 Lights, 25 cm Heads

“Good quality, natural marble, transportation is very fast, I recommend”

Nicola B.Verified buyer

Read all 1 reviews

Customer Reviews

Overall rating: 5.0 / 5 from 1 reviews.

Complete the room

You might also like...

FAQ

Questions, answered

How many lights should I choose?

The cart sells clusters of 1, 3, 5, 7, 9, 12, 16 and 18 lights. Each head adds 5 W (500 lm), so 3 lights give 15 W (1500 lm) and 18 give 90 W (9000 lm).

Are the bulbs included?

Yes. Every head comes with its own replaceable E27 LED bulb, so a 5-light cluster arrives with 5 bulbs.

What light colour does it give?

Warm white, 3000 K, through the alabaster. It is the only light colour offered.

Can I dim it?

Not as standard. Dimming is available on request: email info@clerachic.com before you order.

How is it fitted, and how long is the cord?

It is hardwired, so it is connected to the ceiling supply; ask an electrician if you are unsure. The steps are in the Installation guide on this page, and the cord adjusts up to 1.5 m (5 ft).

How big is the canopy?

The round canopy grows with the number of lights, from 12 cm (4.7″) up to 60 cm (23.6″) across.

How heavy is it?

A 1-light cluster weighs 2 kg (4.4 lb) and an 18-light cluster 36 kg (79.4 lb), so the weight rises with the count.

What is it made of?

Each head is alabaster marble, 25 cm (9.8″) tall, hung from iron cords.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Clérachic cluster chandelier of lit alabaster cylinders at staggered heights from a round black canopy, studio shot.
Free advice before you buy

Not sure it suits your room?

Tell us about the space and the ceiling height, and a person on the team will tell you how it will look and fit.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.