• Clérachic alabaster wall light on a cream wall above a pale sofa, a brown cushion and a leafy branch in the living room.
  • Studio view of a slim Clérachic alabaster wall light on a plain white backdrop, its cylinder glowing amber with a dark wall plate behind.
  • Two Clérachic alabaster wall lights flank a black-framed mirror above a walnut vanity in a marble bathroom, both glowing warmly.
  • A pair of Clérachic alabaster wall lights either side of a framed print above a black console table in a panelled hallway.
  • Clérachic alabaster wall lights beside a tufted linen headboard in a bedroom, lit softly above walnut nightstands.
  • Slim Clérachic alabaster wall lights set into a dark-green bookcase wall in a living room, above a brown leather sofa.
  • Three Clérachic alabaster wall lights in a row on a navy panelled dining room wall above a wooden sideboard and laid table.
  • Close-up of a lit Clérachic alabaster wall light in a bedroom, showing the cream veining of the stone against a taupe wall.
  • A tall Clérachic alabaster wall light glows beside a cane-backed bed and a black marble side table in a bedroom.
  • A lit Clérachic alabaster wall light beside a grey upholstered bed in a bedroom, with a marble cone side table below.
  • Detail of this Clérachic alabaster wall light unlit against a pale wall, the pale stone cylinder with soft grey veining and a dark bracket.
  • Clérachic alabaster wall light shown lit against a light grey wall, with warm veining and a dark bracket along its side.
  • Close view of the joined alabaster sections and amber veining on this Clérachic wall light, lit on a pale grey wall.
  • Shorter Clérachic alabaster wall light glowing on a pale grey wall, with a visible seam between two stone sections.
  • Compact Clérachic alabaster wall light lit against a plain grey wall, its dark bracket casting a soft shadow to one side.
  • Mid-length Clérachic alabaster wall light on a plain grey wall, warm light spilling from its stone cylinder.
  • Longer Clérachic alabaster wall light on a pale wall, its veined cylinder lit warm with a thin dark cap at each end.
  • Tall Clérachic alabaster wall light glowing on a light wall, showing stone seams and the slim dark mounting plate.
5 sizes

Alabaster Wall Light, Integrated LED, Slim 6 cm Wall Sconce

$229Incl. VAT & Free Shipping
Finishes White
1

Arrives in United States within Nov 30–Dec 7

Description

An elongated wall lamp with a white alabaster shade, handcrafted from joined sections of natural stone, on a black body with a brass frame. The integrated LED gives warm light and needs no bulb changes.

Five heights run from 30 to 80 cm (11.8 to 31.5″). Choose Warm Light, or the Triac Dimmable Warm Light version if you want to dim it. It is hardwired and suits bedrooms, bedsides and living rooms.

Shipping & delivery

Free shipping to United States on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Size
Dimension drawing of this Clérachic alabaster wall light, 6 x 30 cm, with its 30 cm height and 6 cm diameter marked.
The details

Everything you need to know before it arrives

An elongated alabaster shade, joined from sections of natural stone, sits on a black body in five heights from 30 to 80 cm.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions, 6 x 30 cm
∅6 cm × H 30 cm (2.4″ × H 11.8″)
Dimensions, 6 x 40 cm
∅6 cm × H 40 cm (2.4″ × H 15.7″)
Dimensions, 6 x 50 cm
∅6 cm × H 50 cm (2.4″ × H 19.7″)
Dimensions, 6 x 60 cm
∅6 cm × H 60 cm (2.4″ × H 23.6″)
Dimensions, 6 x 80 cm
∅6 cm × H 80 cm (2.4″ × H 31.5″)
Type
Wall lamp
Material
brass, alabaster
Environment
Indoor
Shade colour
White
Note
The elongated alabaster shade is handcrafted from carefully joined sections of natural stone. Visible seams and variations in colour or veining are natural and not considered defects
In the room

See it in the room

A pair of Clérachic alabaster wall lights either side of a framed print above a black console table in a panelled hallway.
Clérachic alabaster wall lights beside a tufted linen headboard in a bedroom, lit softly above walnut nightstands.
Slim Clérachic alabaster wall lights set into a dark-green bookcase wall in a living room, above a brown leather sofa.
Close view of the joined alabaster sections and amber veining on this Clérachic wall light, lit on a pale grey wall.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Five heights from 30 cm to 80 cm, all 6 cm across
  • Handcrafted alabaster joined from natural stone sections
  • Visible seams and veining are part of the stone's character
  • Integrated LED, so there is no bulb to replace
Reviews

Reviews and photos

5.0 2 verified reviews · 2 with photos
Customer photo review of Alabaster Wall Light, Integrated LED, Slim 6 cm Wall Sconce

“The marble and black metal combo is exactly my vibe.”

Nicholas G.Verified buyer

Customer photo review of Alabaster Wall Light, Integrated LED, Slim 6 cm Wall Sconce

“Wired it in 20 min.”

Nora C.Verified buyer

Read all 2 reviews

Customer Reviews

Overall rating: 5.0 / 5 from 2 reviews.

Complete the room

You might also like...

FAQ

Questions, answered

What are the dimensions of this lamp?

Five sizes available: 6 cm (2.4″) diameter × 30 cm (11.8″) height, 6 cm (2.4″) × 40 cm (15.7″), 6 cm (2.4″) × 50 cm (19.7″), 6 cm (2.4″) × 60 cm (23.6″), or 6 cm (2.4″) × 80 cm (31.5″) height.

What materials and colours is this wall lamp made from?

Brass frame with black body and white alabaster shade. The alabaster is handcrafted from natural stone sections.

What style is this lamp?

Minimalist design with clean lines and a simple, elegant form.

Which rooms is this wall lamp suitable for?

Bedroom, bedside, and living room. Multiple heights let you choose the right scale for your space.

What type of light source does it have?

Integrated LED with warm light. No bulb replacement needed.

How is this lamp installed?

Hardwired installation. Operates on AC 110–240 V voltage.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Detail of this Clérachic alabaster wall light unlit against a pale wall, the pale stone cylinder with soft grey veining and a dark bracket.
Free advice before you buy

Not sure which size suits your room?

Tell us about the space, the chair it will stand beside or the ceiling height, and a person on the team will suggest a size and finish.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.