• Clérachic round travertine wall lamp, close up of its pitted cream stone surface on a dark walnut headboard above a chest
  • Clérachic wall lamp, a rounded dome of beige travertine-look stone with a warm halo glowing behind it, studio shot on cream plaster
  • Clérachic wall lamp, a rounded beige stone dome with a mottled surface, switched off, studio shot on a cream plaster wall
  • Clérachic round travertine wall lamp mounted on a walnut headboard above a wooden bedside chest with dried flowers in a bedroom
  • Clérachic small travertine wall lamp on a peach wall beside an artwork and a terracotta sofa in a sunlit living room
  • Clérachic travertine wall lamp, close up of the porous stone dome glowing warm against a soft peach wall in a room

Beige Travertine Sphere Wall Light, 15 cm, Wall Sconce

$234Incl. VAT & Free Shipping

Emitting ColorWarm White (3000K)

1

Arrives in United States within Nov 30–Dec 7

Description

A wall light built around one rounded dome of beige travertine, with a warm halo of light glowing out from behind it onto the wall. The stone is porous and pitted, and a 7 W integrated LED gives warm white light at 3000 K.

The dome is 15 cm (5.9″) across and comes in one size with warm white light. It is wall-mounted and connected to the wall supply, and it suits a bedside wall, a living room or a hallway.

Shipping & delivery

Free shipping to United States on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

The details

Everything you need to know before it arrives

A 15 cm sphere of beige travertine mounted on the wall, casting a warm glow across the surrounding surface and showing off the natural texture of the stone.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions
∅15 cm (5.9″)
Wattage
7 W (770 lm)
Material
travertine
Finish
Beige
Light source
integrated LED
Dimming
available on request, email info@clerachic.com
Voltage
AC 90–260 V
Mounting
wall-mounted
Canopy
∅10 cm (3.9″)
Certifications
UL, CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, RoHS, SAA, VDE
Light colour
warm white (3000 K)
Clérachic travertine wall lamp, close up of the porous stone dome glowing warm against a soft peach wall in a room
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Beige travertine dome — pitted natural stone surface
  • Warm halo glow from behind the dome, 3000 K
  • One size, 15 cm (5.9″) across, 10 cm (3.9″) canopy
  • 7 W integrated LED, 770 lm — wall-mounted
Reviews

Reviews and photos

5.0 2 verified reviews · 2 with photos
Customer photo review of Beige Travertine Sphere Wall Light, 15 cm, Wall Sconce

“They were better than expected. Exact a soft glow to home walls.”

Xanthe M.Verified buyer

Customer photo review of Beige Travertine Sphere Wall Light, 15 cm, Wall Sconce

“Easy to install. Work perfectly and lighting is great.”

Lewis T.Verified buyer

Read all 2 reviews

Customer Reviews

Overall rating: 5.0 / 5 from 2 reviews.

Customer photo review of Beige Travertine Sphere Wall Light, 15 cm, Wall Sconce

They were better than expected. Exact a soft glow to home walls.

Beige Travertine Sphere Wall Light, 15 cm, Wall Sconce

Store owner replied: So glad it found the right spot in your home. Thank you for the photo! At your disposal any time, Gerome

Complete the room

You might also like...

FAQ

Questions, answered

What is this wall light made of?

The dome is natural travertine in a beige finish. It is a porous stone, so you will see small pits and a mottled surface.

Does it use a bulb?

The LED is built into the fitting, 7 W and 770 lm in warm white at 3000 K, so there is no bulb to buy or fit.

Will mine look exactly like the photos?

The tone can read creamier or warmer depending on the light in your room.

Is it bright enough for a large room?

It gives soft, ambient light, so it works best as an accent beside a bed or along a hallway, or as one of several lights in a bigger room.

Can I dim it?

Not as standard. Dimming is available on request: email info@clerachic.com before you order.

How is it fitted?

It is wall-mounted on a 10 cm (3.9″) round canopy and connected to the wall supply. Use a qualified electrician if you are unsure; the steps are in the Installation guide on this page.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Clérachic small travertine wall lamp on a peach wall beside an artwork and a terracotta sofa in a sunlit living room
Free advice before you buy

Not sure it suits your room?

Tell us about the space and the ceiling height, and a person on the team will tell you how it will look and fit.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.