• A Clérachic chrome two-sphere wall light beside a bed with a grey headboard, lit warmly against a cream wall.
  • Studio shot on a plain backdrop of a Clérachic chrome wall light with two frosted white glass spheres, both softly lit.
  • Two Clérachic chrome wall lights with glass spheres flank a framed mirror above a walnut dressing table in a bedroom, glowing warm.
  • Living room scene with a Clérachic chrome wall light with two glass spheres above a walnut sideboard and a dark grey sofa.
  • Bedroom view of a Clérachic chrome wall light with two glass globes above a floating oak bedside shelf and a pale bed.
  • Home office with a green wall, where a Clérachic chrome wall light with two white spheres hangs above a desk and shelving.
  • Bathroom scene with a Clérachic chrome wall light with two glowing spheres on a travertine wall above a walnut vanity and basin.
  • Close view of this Clérachic chrome arc and its two frosted glass spheres, lit, on a pale wall in a studio shot.
  • Side detail of the curved chrome arm on this Clérachic wall light, with the round backplate and two white spheres.
  • Angled close-up of this Clérachic wall light's polished chrome arc, round wall plate and two warmly lit glass spheres.
  • Front detail on a plain backdrop of this Clérachic wall light, showing the chrome arm reflecting the two lit spheres.
  • The Clérachic chrome wall light switched off in a studio shot, with both glass spheres a cool, plain white.
  • Studio shot of a Clérachic chrome wall light, lit, seen from the side with its curved arm and round backplate.
  • Small, distant view of a Clérachic chrome arc wall light with two lit spheres on a light grey backdrop.
  • Studio shot on a plain backdrop showing a Clérachic wall light's mirror-bright chrome arm and two softly glowing spheres.
  • Close-up of this Clérachic chrome wall light on a white ground, with both frosted spheres lit and the arm curving behind.
  • Three-quarter studio view of a Clérachic chrome wall light with two lit glass spheres and its round mounting plate.

Chrome Arc Wall Light, Two Glass Spheres, Wall Sconce, 30 cm

€125Incl. VAT & Free Shipping

Size10 × 30 cm

ColourChrome

1

Arrives in France within Nov 30–Dec 7

Description

A wall light with a curved chrome steel arm and two white glass spheres. The spheres throw light outward and downward. It runs on a 3 W LED or Edison bulb and is hardwired, with a standard push switch.

It is 10 cm (3.9″) wide and 30 cm (11.8″) tall, in chrome with white glass. Mount it beside a mirror, above a nightstand or on either side of a bed.

Shipping & delivery

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Size
Dimension drawing of this Clérachic wall light, 10 x 30 cm, with its height of 30 cm, width of 10 cm and projection of 17 cm marked.
The details

Everything you need to know before it arrives

A curved chrome steel arm carries two white glass spheres in a fixture 10 cm wide and 30 cm tall, for light beside a mirror or bed.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions
∅10 cm × H 30 cm (3.9″ × H 11.8″)
Material
Steel, glass spheres
Bulb type
LED bulb or Edison bulb
Power
3 W
Voltage
AC 110–240 V
Control
Compatible with common push switches (not included)
Wiring
Hardwired
Mounting
Ceiling and wall
Best for
Bathrooms, bedrooms and entryways where you need focused light beside a mirror or flanking a sink or bed.
Shade finish
White
Finish
Chrome
In the room

See it in the room

A Clérachic chrome two-sphere wall light beside a bed with a grey headboard, lit warmly against a cream wall.
Living room scene with a Clérachic chrome wall light with two glass spheres above a walnut sideboard and a dark grey sofa.
Bedroom view of a Clérachic chrome wall light with two glass globes above a floating oak bedside shelf and a pale bed.
Close-up of this Clérachic chrome wall light on a white ground, with both frosted spheres lit and the arm curving behind.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Chrome steel arc with two white glass spheres
  • Spheres glow outward and downward, onto a mirror, sink or bedside
  • Compact ∅ 10 cm × H 30 cm — sits neatly beside a bed or mirror
  • Runs on AC 110–240 V with a standard push switch
Reviews

Reviews and photos

5.0 3 verified reviews · 3 with photos
Customer photo review of Chrome Arc Wall Light, Two Glass Spheres, Wall Sconce, 30 cm

“Happy with my purchase. Very good quality and they look amazing! Happy with my purchase.”

XeniaVerified buyer

Customer photo review of Chrome Arc Wall Light, Two Glass Spheres, Wall Sconce, 30 cm

“works great. works great to light up my work space so i dont have to have the main light on”

ChloeVerified buyer

Customer photo review of Chrome Arc Wall Light, Two Glass Spheres, Wall Sconce, 30 cm

“Good looking lamps. Good looking lamps that are solid and easy to install over my bed.”

VioletVerified buyer

Read all 3 reviews

Customer Reviews

Overall rating: 5.0 / 5 from 3 reviews.

Complete the room

You might also like...

FAQ

Questions, answered

What is it made of?

Steel frame with chrome finish and two white glass spheres. The LED or Edison bulb screws into a G9 socket.

Can I dim it?

Yes, it works with any standard dimmer switch or push switch (switch not included).

Which way does the light point?

The two spheres glow outward and downward from the wall, ideal for lighting a mirror, sink, vanity or bedside surface.

What does installation require?

An electrician must hardwire it to a standard wall junction box. No plug-in outlet needed.

What voltage does it run on?

It runs on AC 110–240 V at 3 W, hardwired to a standard wall junction box. No plug-in outlet is needed.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

Studio shot on a plain backdrop of a Clérachic chrome wall light with two frosted white glass spheres, both softly lit.
Free advice before you buy

Not sure which size suits your room?

Tell us about the space, the chair it will stand beside or the ceiling height, and a person on the team will suggest a size and finish.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.