Solid wood blades, a pure copper DC motor, and an integrated LED: the Maverick brings together style and durability with six adjustable airflow levels for comfort you can tune to the moment. Its clean, sleek design adds a quiet sophistication to modern and traditional homes alike.
Features
-
DC copper motor - a pure copper DC motor that runs quiet, energy-efficient, and long-lasting, with 6-speed airflow control.
-
Solid wood blades - real wood blades with natural grain and warmth that elevate any interior.
-
42" or 52" - 42" suits rooms up to roughly 150 sq ft; 52" suits larger living and dining spaces.
Blade gaskets are required
When fitting the blades, always install the gaskets. Skipping them will damage the motor's copper wire and void any warranty.

Sloped ceilings
A downrod version is available for sloped-ceiling installations. Reach out to us at info@clerachic.com for compatible accessories before ordering.
Available sizes
| Size |
Diameter |
Blade length |
LED power |
| 42" |
106 cm (41.7") |
51 cm (20") |
~18W |
| 52" |
132 cm (52") |
61 cm (24") |
~18W |
Both sizes: H25 cm (9.8"). Motor: 35W variable frequency. Fan height from ceiling: 3.9" + 7.9" adjustable rod.

Available finishes
- Walnut wood grain
- Nature wood grain
- White
- Black
Ceiling compatibility - read before installing
-
Not suitable for ceilings with joists plus gypsum board or wood panels, which can cause noise and wobbling.
-
Not suitable for prefabricated ceilings; installation on cement concrete and solid wood beams is fine.
- The structural beam width must be at least 6 cm (2.4") and the ceiling must support over 20 kg (44 lbs).
- If the installation surface has round or square grooves, contact us at info@clerachic.com with the groove's diameter and depth before installing.
-
Sloped ceilings - a downrod version is available; contact us for compatible accessories.
Specifications
| Materials |
Metal frame, solid wood blades, acrylic shade, pure copper DC motor |
| LED light source |
Integrated LED, ~18W, 3000K / 4000K / 6000K |
| Motor |
DC pure copper motor, 35W variable frequency |
| Fan speeds |
6-speed control |
| Voltage |
AC 110-240V, 60 Hz |
| Wall switch |
Clérachic Wireless Wall Switch only - standard home switches are not compatible |
| Control |
Handheld remote (included) |
| Hanging rod |
3.9" + 7.9" (10 + 20 cm) adjustable, extendable on request |
| Wiring |
Hardwired |
| IP rating |
IP20, indoor use only, not waterproof |
| Certification |
North America, EU, AU, Saudi Arabia |
| Finishes |
Walnut wood grain, Nature wood grain, White, Black |
Spec sheet and installation guide available on request.
Frequently asked questions
Can I use a standard wall switch?
No. This fan light works only with the Clérachic Wireless Wall Switch; standard home switches are not compatible with its receiver. If you prefer wall control over the handheld remote, you can add the Wireless Wall Switch, which is available alongside a lighting fixture rather than on its own. Email info@clerachic.com for details.
Are blade gaskets required?
Yes. Blade gaskets are required during installation; skipping them will damage the motor's copper wire. Always fit the gaskets when attaching the blades.
Can it be installed on a sloped ceiling?
A downrod version is available for sloped-ceiling installations. Contact us at info@clerachic.com for compatible accessories before ordering.
What ceiling types is it not suitable for?
It cannot be installed on joists plus gypsum board or wood-panel ceilings (which cause noise and wobbling), prefabricated ceilings, or sloped ceilings in its standard form. The beam width must be at least 6 cm and the ceiling must support over 20 kg.