One capsule of quarried alabaster, 32 cm (12.6″) tall, split at the waist by a metal band that doubles as the mount. The LED is integrated, so there is no bulb to buy, and no cord or switch breaks the face. At 10 cm (3.9″) deep it suits a hallway, a bedside, or a pair flanking a vanity mirror.
What makes it work
-
Real alabaster, not glass — the veining is quarried, not printed, so every shade carries a pattern of its own.
-
Even glow, no hotspot — the integrated LED lights the stone from within, so the veining shows through and no lamp is ever in sight.
-
Mounts upright or sideways — a slim column beside a door or a low bar above a mirror, from the same ∅10 cm (3.9″) wall plate.
Before you order
At 32 cm (12.6″) this is an accent sconce, roughly a third the height of a standard vanity mirror, and it is at its best in pairs rather than alone on a wide wall. It is hardwired, with no cord and no inline switch, so it needs an outlet box behind it. Alabaster is quarried, so your shade will carry a tone and a veining of its own.
Installation
The band screws to a round plate that covers a standard outlet box. Decide the orientation before you set the box — the plate follows the fixture. Flanking a mirror, wall lights usually sit 152–165 cm (60–65″) off the floor; beside a bed, 152–160 cm (60–63″) drops the glow onto the page rather than into your eyes. Allow for the 10 cm (3.9″) projection beside a door frame or a mirror edge, and fix into a stud or a rated wall anchor rather than plasterboard alone. Have an electrician make the connection if you'd rather not touch the wiring, or fit it yourself if you're comfortable with basic household wiring — it's a straightforward job.
Specifications
| Materials |
Natural alabaster shade, metal band and wall plate |
| Band finish |
Brass, black or chrome — each with the white alabaster shade |
| Height |
32 cm (12.6″) |
| Width |
11 cm (4.3″) |
| Projection from wall |
10 cm (3.9″) |
| Wall plate |
∅10 cm (3.9″) |
| Orientation |
Vertical or horizontal, from the same fixing |
| Light source |
Integrated LED, one per fixture |
| Bulbs |
None required |
| Voltage |
AC 110–240 V |
| Wiring |
Hardwired |
| IP rating |
IP20 — indoor, dry locations only |

Spec sheet and installation guide available on request — email info@clerachic.com and we'll send them over.
Frequently asked questions
Can I mount it horizontally?
Yes. The same wall plate takes the fixture either way — a column beside a door, or a low bar above a mirror.
Which finish should I choose?
All three carry the same white alabaster shade and only the band changes: brass warms the stone, chrome keeps it cool and crisp, black draws the sharpest outline.
Is it suitable for a bathroom?
No. It is rated IP20, for indoor, dry locations only, so keep it away from steam and splashes.
Will my shade look exactly like the photographs?
The tone will be close, the veining will not. Alabaster is quarried stone, so each shade is cut with markings of its own.
Free shipping on every order. Free returns within 30 days. Reach us at info@clerachic.com — real people, happy to help.