• A dark Clérachic wall light with a swivelling head points its warm beam at white pillows, above a white bedside table with a blue glass.
  • A slim folding Clérachic wall light in a dark brushed finish, with a small square head and a warm LED, on a plain white backdrop.
  • A Clérachic bedside wall light glows over a small round table and book, against a deep teal wall beside a grey linen bed.
  • A Clérachic wall light in brushed nickel with a folded arm and a small square LED head, seen close up against a pale grey wall.
  • A nickel Clérachic wall light mounted above a white bedside table and speaker, beside black-and-cream patterned cushions.
  • A small Clérachic wall light sits above a round black side table and a grey linen bed, against a teal wall with a narrow shelf.
  • A matt white Clérachic wall light with its head turned out, lit warm against a pale grey wall above two books.
  • With its head swung up and the LED switched on, this matt black Clérachic wall light is shown on a light grey background.
  • A matt black Clérachic wall light standing with its head raised nearly upright, on a grey backdrop with the LED facing up.
  • With its head turned left and the warm LED on, this Clérachic dark brushed wall light lies folded flat against its base.
  • Mirrored view of the dark brushed Clérachic wall light, with its head on the right and the warm LED switched on.
  • Arm raised in a V shape, this matt black Clérachic wall light has its LED head angled upward on a pale backdrop.
  • Shown from the opposite angle, this matt black Clérachic wall light has its arm raised and the round LED lens at the top.
  • Folded arm and a small lit LED head on this dark brushed Clérachic wall light, shown on a clean white background.

Swing Head LED Wall Light for Bedside, Matt Black, Wall Sconce

€93Incl. VAT & Free Shipping

Size20 × 4.5 cm

Colour Matt Black
1

Arrives in France within Nov 30–Dec 7

Description

A compact aluminium alloy wall sconce with a round housing and a head that swings out up to 150° to aim the light. Pull the head out to switch on and push it in to switch off. An integrated LED gives 3000 K warm or 6000 K cool light.

It is 20 cm (7.9″) across and 4.5 cm (1.8″) deep when closed, in Matt Black, Matt White, Nickel or Dark Wood Grain. It is hardwired and suits bedside reading, bedrooms and studies.

Shipping & delivery

Free shipping to France on every order, with no minimum.

Each piece is made to order, so allow 7 to 12 business days in total. Order today and you can expect it between 30 November and 7 December.

Returns & exchanges

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect.

Payment options
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Google Pay
  • Maestro
  • Mastercard
  • MB WAY
  • Satispay
  • Shop Pay
  • Union Pay
  • Visa

Questions about sizes or finishes? Email info@clerachic.com and we will reply within 24 hours on business days.

Size guide

Find the right size

Size
Dimension drawing of this Clérachic wall light, 20 x 4.5 cm, 20 x 4.5 cm.
The details

Everything you need to know before it arrives

A slim aluminium wall sconce, 20 cm across and just 4.5 cm deep when closed, with a head that swings out up to 150° to aim the light.

Installation guide

Every wall light in this collection mounts to the wall with the hardware included in the box. The steps below cover all three power types we supply - hardwired, plug-in and rechargeable - so read the first section, work out which one you have, then follow the matching path.

Before you start

  • Power type: your light is hardwired, plug-in or rechargeable. The Product Specifications above say which. It changes the whole installation, so check before you open anything.
  • Mounting: all wall lights fix to a flat wall surface. Screws, anchors and the mounting bracket are supplied.
  • Dimming: lights with a standard replaceable bulb can usually be dimmed. Integrated LED models generally cannot. The specification above states which your model is.
  • Indoors or out: only fit a light outside if its IP rating says it is suitable. An indoor-rated fitting will fail quickly in the weather and is unsafe in the wet.
  • Wall type: plasterboard, brick and tile each need their own anchor. The supplied screws suit standard plasterboard; buy the right fixing for anything else.

Tools you may need

  • Screwdriver
  • Voltage tester
  • Wire nuts or terminal connectors (supplied with hardwired models)
  • Drill and a bit suited to your wall, if you are making a new fixing point
  • Spirit level and pencil

If your light is hardwired

1. Switch off the power

Turn the lighting circuit off at your consumer unit or breaker panel. Do not rely on the wall switch. Test the wires at the outlet box with a voltage tester and confirm they are dead before you touch them.

2. Remove the old fitting

If you are replacing an existing light, unscrew it and disconnect the wires by undoing the connectors. Support the fitting as you free it so it does not hang on its wiring.

3. Fit the mounting bracket

Hold the new bracket against the outlet box or your marked position and check it with a level. Fix it with the supplied screws, tightening evenly so the bracket sits flat against the wall.

4. Connect the wiring

  • Live to live: black, brown, or the terminal marked L
  • Neutral to neutral: white, blue, or the terminal marked N
  • Earth to earth: green, green-and-yellow, or bare, to the earth terminal or screw

Twist each pair together and secure it with a connector. Tuck the wiring back into the box so nothing is pinched when the fitting closes onto the bracket.

5. Mount the fitting

Line the body up with the bracket and secure it with the screws provided. It should sit flush to the wall with no gap and no movement.

6. Fit the bulb

If your light takes a replaceable bulb, fit the type and wattage given in the Product Specifications above. Do not exceed the wattage printed on the socket.

7. Restore power and test

Switch the circuit back on and test the light. If it does not come on, isolate the power again before you re-open anything.

If your light is plug-in

Fix the bracket to the wall with the screws and anchors supplied, checking it with a level. Attach the body to the bracket, then run the cable to the nearest socket. Clip or tuck the cable so it is not a trip hazard and is not pulled taut where it leaves the fitting.

If your light is rechargeable

Fix the bracket to the wall, then charge the light fully with the supplied cable before its first use - a first charge from flat takes longer than later ones. Seat the light on its bracket and switch it on. Most models lift off the bracket for recharging without tools.

Important tips

  • Follow the wiring rules that apply where you live. If any part of this is unfamiliar, have a qualified electrician do it - it is a short job for them.
  • Check the outlet box is sound and can carry the weight of the fitting before you mount it.
  • Dust the fitting occasionally with a dry, soft cloth. Do not use solvents or abrasive cleaners on a painted or plated finish.
  • Let a bulb cool before you handle it, and never fit a bulb above the rated wattage.

If anything about the fitting or the wiring is unclear, email info@clerachic.com and a person will answer you.

Specifications
Dimensions
20 cm × 4.5 cm (7.9″ × 1.8″)
Material
Aluminium alloy, metal
Light source
Integrated LED
Colour temperature
3000 K, 6000 K
Voltage
AC 110–240 V
Control
Compatible with common push switch (not included)
Wiring
Hardwired
Mounting
Wall
Finishes
Matt Black, Matt White, Nickel, Dark Wood Grain
Best for
Bedside reading, task lighting in a bedroom or study, or accent light beside a nightstand where it won't disturb a sleeping partner
A Clérachic wall light in brushed nickel with a folded arm and a small square LED head, seen close up against a pale grey wall.
Designed in Oslo The Clérachic edit Designed in Oslo
The object

Why you'll love it

  • Head swings up to 150°, aiming light at your page, not your partner
  • Pull the head out to switch on, push it back to switch off
  • Solid aluminium alloy housing that sits flush to the wall when closed
  • Slim 4.5 cm profile above a headboard or beside a nightstand
Reviews

Reviews and photos

5.0 2 verified reviews · 2 with photos
Customer photo review of Swing Head LED Wall Light for Bedside, Matt Black, Wall Sconce

“So easy to install , great little light . Positions easily. Looks stylish.”

Chelsea D.Verified buyer

Customer photo review of Swing Head LED Wall Light for Bedside, Matt Black, Wall Sconce

“Very good quality and nice looking . I love it,I will order more.”

Haley J.Verified buyer

Read all 2 reviews

Customer Reviews

Overall rating: 5.0 / 5 from 2 reviews.

Complete the room

You might also like...

FAQ

Questions, answered

What is this sconce made of?

Aluminium alloy and metal. It comes in four finishes: Matt Black, Matt White, Nickel, and Dark Wood Grain.

What angle does the head move to?

The fixture articulates up to approximately 150°, letting you angle the light beam toward reading material or away from a bed partner's face.

What does installation require?

A hardwired installation by a licensed electrician. The fixture connects directly to your home's wall circuit, and a standard push switch can control it.

What switch does it work with?

It works with a standard push switch, which is not included.

What voltage does it run on?

It runs on AC 110–240 V mains power and is hardwired.

What colour of light does it give?

The integrated LED is available in 3000 K or 6000 K.

What if it isn't right for my room?

Return or exchange it within 30 days of delivery, unused and in its original packaging. No restocking fee. Return shipping is paid by you unless the item is defective, damaged or incorrect. Refunds are issued within 7 business days.

How long does delivery take?

Orders placed before 17:00 (GMT+1) are processed in 1–2 business days, then 6–10 in transit: 7–12 business days in total. Shipping is free on every order, and you get a tracking link by email.

What if it arrives damaged?

Email photos of the item and packaging to info@clerachic.com within 48 hours of delivery and we will send a replacement or refund.

A matt white Clérachic wall light with its head turned out, lit warm against a pale grey wall above two books.
Free advice before you buy

Not sure it suits your room?

Tell us about the space and the ceiling height, and a person on the team will tell you how it will look and fit.

  • info@clerachic.com · we reply within 24 hours on business days
  • Monday to Friday, 09:00–17:00 (GMT+1)
  • Still unsure? Return or exchange within 30 days of delivery.